Welcome to the first project of the Machine Learning Engineer Nanodegree! In this notebook, some template code has already been provided for you, and you will need to implement additional functionality to successfully complete this project. You will not need to modify the included code beyond what is requested. Sections that begin with 'Implementation' in the header indicate that the following block of code will require additional functionality which you must provide. Instructions will be provided for each section and the specifics of the implementation are marked in the code block with a 'TODO' statement. Please be sure to read the instructions carefully!
In addition to implementing code, there will be questions that you must answer which relate to the project and your implementation. Each section where you will answer a question is preceded by a 'Question X' header. Carefully read each question and provide thorough answers in the following text boxes that begin with 'Answer:'. Your project submission will be evaluated based on your answers to each of the questions and the implementation you provide.
Note: Code and Markdown cells can be executed using the Shift + Enter keyboard shortcut. In addition, Markdown cells can be edited by typically double-clicking the cell to enter edit mode.
In this project, you will evaluate the performance and predictive power of a model that has been trained and tested on data collected from homes in suburbs of Boston, Massachusetts. A model trained on this data that is seen as a good fit could then be used to make certain predictions about a home — in particular, its monetary value. This model would prove to be invaluable for someone like a real estate agent who could make use of such information on a daily basis.
The dataset for this project originates from the UCI Machine Learning Repository. The Boston housing data was collected in 1978 and each of the 506 entries represent aggregated data about 14 features for homes from various suburbs in Boston, Massachusetts. For the purposes of this project, the following preprocessing steps have been made to the dataset:
'MEDV' value of 50.0. These data points likely contain missing or censored values and have been removed.'RM' value of 8.78. This data point can be considered an outlier and has been removed.'RM', 'LSTAT', 'PTRATIO', and 'MEDV' are essential. The remaining non-relevant features have been excluded.'MEDV' has been multiplicatively scaled to account for 35 years of market inflation.Run the code cell below to load the Boston housing dataset, along with a few of the necessary Python libraries required for this project. You will know the dataset loaded successfully if the size of the dataset is reported.
In [11]:
# Import libraries necessary for this project
import numpy as np
import pandas as pd
from sklearn.cross_validation import ShuffleSplit
# Import supplementary visualizations code visuals.py
import visuals as vs
# Pretty display for notebooks
%matplotlib inline
# Load the Boston housing dataset
data = pd.read_csv('housing.csv')
prices = data['MEDV']
features = data.drop('MEDV', axis = 1)
# Success
print "Boston housing dataset has {} data points with {} variables each.".format(*data.shape)
In this first section of this project, you will make a cursory investigation about the Boston housing data and provide your observations. Familiarizing yourself with the data through an explorative process is a fundamental practice to help you better understand and justify your results.
Since the main goal of this project is to construct a working model which has the capability of predicting the value of houses, we will need to separate the dataset into features and the target variable. The features, 'RM', 'LSTAT', and 'PTRATIO', give us quantitative information about each data point. The target variable, 'MEDV', will be the variable we seek to predict. These are stored in features and prices, respectively.
For your very first coding implementation, you will calculate descriptive statistics about the Boston housing prices. Since numpy has already been imported for you, use this library to perform the necessary calculations. These statistics will be extremely important later on to analyze various prediction results from the constructed model.
In the code cell below, you will need to implement the following:
'MEDV', which is stored in prices.
In [12]:
# TODO: Minimum price of the data
minimum_price = np.min(prices)
# TODO: Maximum price of the data
maximum_price = np.max(prices)
# TODO: Mean price of the data
mean_price = np.mean(prices)
# TODO: Median price of the data
median_price = np.median(prices)
# TODO: Standard deviation of prices of the data
std_price = np.std(prices)
# Show the calculated statistics
print "Statistics for Boston housing dataset:\n"
print "Minimum price: ${:,.2f}".format(minimum_price)
print "Maximum price: ${:,.2f}".format(maximum_price)
print "Mean price: ${:,.2f}".format(mean_price)
print "Median price ${:,.2f}".format(median_price)
print "Standard deviation of prices: ${:,.2f}".format(std_price)
As a reminder, we are using three features from the Boston housing dataset: 'RM', 'LSTAT', and 'PTRATIO'. For each data point (neighborhood):
'RM' is the average number of rooms among homes in the neighborhood.'LSTAT' is the percentage of homeowners in the neighborhood considered "lower class" (working poor).'PTRATIO' is the ratio of students to teachers in primary and secondary schools in the neighborhood. Using your intuition, for each of the three features above, do you think that an increase in the value of that feature would lead to an increase in the value of 'MEDV' or a decrease in the value of 'MEDV'? Justify your answer for each.
Hint: This problem can phrased using examples like below.
'RM' value(number of rooms) of 6 be worth more or less than a home that has an 'RM' value of 7?'LSTAT' value(percent of lower class workers) of 15 have home prices be worth more or less than a neighborhood that has an 'LSTAT' value of 20?'PTRATIO' value(ratio of students to teachers) of 10 have home prices be worth more or less than a neighborhood that has an 'PTRATIO' value of 15?Answer: Individual feature might affect the value of MEDV as follows:
RM, the value of MEDV will increase as having more number of rooms will cost more.LSTAT, the value of MEDV might decrease as lower class worker have less income consequently they can afford less resulting in less value of MEDV. Also people of higher class might not opt for giving high rent in this area.PTRATIO, the value of MEDV will be less. If student to teacher ratio is higher then value of MEDV will be lower as there are less teacher available for students.In this second section of the project, you will develop the tools and techniques necessary for a model to make a prediction. Being able to make accurate evaluations of each model's performance through the use of these tools and techniques helps to greatly reinforce the confidence in your predictions.
It is difficult to measure the quality of a given model without quantifying its performance over training and testing. This is typically done using some type of performance metric, whether it is through calculating some type of error, the goodness of fit, or some other useful measurement. For this project, you will be calculating the coefficient of determination, R2, to quantify your model's performance. The coefficient of determination for a model is a useful statistic in regression analysis, as it often describes how "good" that model is at making predictions.
The values for R2 range from 0 to 1, which captures the percentage of squared correlation between the predicted and actual values of the target variable. A model with an R2 of 0 is no better than a model that always predicts the mean of the target variable, whereas a model with an R2 of 1 perfectly predicts the target variable. Any value between 0 and 1 indicates what percentage of the target variable, using this model, can be explained by the features. A model can be given a negative R2 as well, which indicates that the model is arbitrarily worse than one that always predicts the mean of the target variable.
For the performance_metric function in the code cell below, you will need to implement the following:
r2_score from sklearn.metrics to perform a performance calculation between y_true and y_predict.score variable.
In [13]:
# TODO: Import 'r2_score'
from sklearn.metrics import r2_score
def performance_metric(y_true, y_predict):
""" Calculates and returns the performance score between
true and predicted values based on the metric chosen. """
# TODO: Calculate the performance score between 'y_true' and 'y_predict'
score = r2_score(y_true, y_predict)
# Return the score
return score
Assume that a dataset contains five data points and a model made the following predictions for the target variable:
| True Value | Prediction |
|---|---|
| 3.0 | 2.5 |
| -0.5 | 0.0 |
| 2.0 | 2.1 |
| 7.0 | 7.8 |
| 4.2 | 5.3 |
Run the code cell below to use the performance_metric function and calculate this model's coefficient of determination.
In [14]:
# Calculate the performance of this model
score = performance_metric([3, -0.5, 2, 7, 4.2], [2.5, 0.0, 2.1, 7.8, 5.3])
print "Model has a coefficient of determination, R^2, of {:.3f}.".format(score)
Hint: The R2 score is the proportion of the variance in the dependent variable that is predictable from the independent variable. In other words:
Answer: The value for R^2 above is 0.923 which is close to 1.
Your next implementation requires that you take the Boston housing dataset and split the data into training and testing subsets. Typically, the data is also shuffled into a random order when creating the training and testing subsets to remove any bias in the ordering of the dataset.
For the code cell below, you will need to implement the following:
train_test_split from sklearn.cross_validation to shuffle and split the features and prices data into training and testing sets.random_state for train_test_split to a value of your choice. This ensures results are consistent.X_train, X_test, y_train, and y_test.
In [15]:
# TODO: Import 'train_test_split'
from sklearn.cross_validation import train_test_split
# TODO: Shuffle and split the data into training and testing subsets
X_train, X_test, y_train, y_test = train_test_split(features, prices, test_size=0.2, random_state = 7)
# Success
print "Training and testing split was successful."
Answer: Splitting data into training and testing set allows us to validate how good our model is. Consider following scenarios:
Hence it's good to split the data in training and testing set. With the training data we can traing the model and with testing data we can validate the model.
In this third section of the project, you'll take a look at several models' learning and testing performances on various subsets of training data. Additionally, you'll investigate one particular algorithm with an increasing 'max_depth' parameter on the full training set to observe how model complexity affects performance. Graphing your model's performance based on varying criteria can be beneficial in the analysis process, such as visualizing behavior that may not have been apparent from the results alone.
The following code cell produces four graphs for a decision tree model with different maximum depths. Each graph visualizes the learning curves of the model for both training and testing as the size of the training set is increased. Note that the shaded region of a learning curve denotes the uncertainty of that curve (measured as the standard deviation). The model is scored on both the training and testing sets using R2, the coefficient of determination.
Run the code cell below and use these graphs to answer the following question.
In [16]:
# Produce learning curves for varying training set sizes and maximum depths
vs.ModelLearning(features, prices)
Hint: Are the learning curves converging to particular scores? Generally speaking, the more data you have, the better. But if your training and testing curves are converging with a score above your benchmark threshold, would this be necessary? Think about the pros and cons of adding more training points based on if the training and testing curves are converging.
Answer:
The following code cell produces a graph for a decision tree model that has been trained and validated on the training data using different maximum depths. The graph produces two complexity curves — one for training and one for validation. Similar to the learning curves, the shaded regions of both the complexity curves denote the uncertainty in those curves, and the model is scored on both the training and validation sets using the performance_metric function.
Run the code cell below and use this graph to answer the following two questions Q5 and Q6.
In [17]:
vs.ModelComplexity(X_train, y_train)
Hint: High bias is a sign of underfitting(model is not complex enough to pick up the nuances in the data) and high variance is a sign of overfitting(model is by-hearting the data and cannot generalize well). Think about which model(depth 1 or 10) aligns with which part of the tradeoff.
Answer:
Validation score seems to have decreased from when the depth was 4, hence high validation error.Hint: Look at the graph above Question 5 and see where the validation scores lie for the various depths that have been assigned to the model. Does it get better with increased depth? At what point do we get our best validation score without overcomplicating our model? And remember, Occams Razor states "Among competing hypotheses, the one with the fewest assumptions should be selected."
Answer: I think a maximum depth of 4 will best generalize the model.
As we can clearly see in the graph above at depth of 4, the validation score is highest(hence low error on testing data). Also after depth 4, the validation score decreases and training score increases. This mean after this depth(4) onwards, the model will lead to overfitting.
Hint: When explaining the Grid Search technique, be sure to touch upon why it is used, what the 'grid' entails and what the end goal of this method is. To solidify your answer, you can also give an example of a parameter in a model that can be optimized using this approach.
Answer: The grid search is used when we have more than 1 Hyper Parameter. The grid search allows us to touch upon all different possible values of hyper parameters and choose the model that performs well.
As we can see in the example above, We apply grid search for different possible value of our hyper parameters (kernel and C) to train our model.
Then we use cross validation set to come up with model which best fits our data. Lastly we choose the model with best score for cross validation set. Hence this allows us to choose a optimum model.
What is the k-fold cross-validation training technique?
What benefit does this technique provide for grid search when optimizing a model?
Hint: When explaining the k-fold cross validation technique, be sure to touch upon what 'k' is, how the dataset is split into different parts for training and testing and the number of times it is run based on the 'k' value.
When thinking about how k-fold cross validation helps grid search, think about the main drawbacks of grid search which are hinged upon using a particular subset of data for training or testing and how k-fold cv could help alleviate that. You can refer to the docs for your answer.
Answer:
k-fold validation is a technique where we split the data into k bucket, then we train the model k times. Each time we train the model we choose a different bucket as testing set and remaining buckets' data as training set. Finally we take the average of the result to get a final model.kernel or C. Hence this might no longer report a generalized performance. Also the number of sample for training is quite low in case of grid search since we divide our data into three buckets viz. training, cross validation and testing set leaving less data for model to train with.To overcome these problem, we can use grid search along with k-fold which will randomize our testing and training set. Also we won't need to divide our data in three parts leaving us with more data to train with.
Your final implementation requires that you bring everything together and train a model using the decision tree algorithm. To ensure that you are producing an optimized model, you will train the model using the grid search technique to optimize the 'max_depth' parameter for the decision tree. The 'max_depth' parameter can be thought of as how many questions the decision tree algorithm is allowed to ask about the data before making a prediction. Decision trees are part of a class of algorithms called supervised learning algorithms.
In addition, you will find your implementation is using ShuffleSplit() for an alternative form of cross-validation (see the 'cv_sets' variable). While it is not the K-Fold cross-validation technique you describe in Question 8, this type of cross-validation technique is just as useful!. The ShuffleSplit() implementation below will create 10 ('n_splits') shuffled sets, and for each shuffle, 20% ('test_size') of the data will be used as the validation set. While you're working on your implementation, think about the contrasts and similarities it has to the K-fold cross-validation technique.
Please note that ShuffleSplit has different parameters in scikit-learn versions 0.17 and 0.18.
For the fit_model function in the code cell below, you will need to implement the following:
DecisionTreeRegressor from sklearn.tree to create a decision tree regressor object.'regressor' variable.'max_depth' with the values from 1 to 10, and assign this to the 'params' variable.make_scorer from sklearn.metrics to create a scoring function object.performance_metric function as a parameter to the object.'scoring_fnc' variable.GridSearchCV from sklearn.grid_search to create a grid search object.'regressor', 'params', 'scoring_fnc', and 'cv_sets' as parameters to the object. GridSearchCV object to the 'grid' variable.
In [18]:
# TODO: Import 'make_scorer', 'DecisionTreeRegressor', and 'GridSearchCV'
from sklearn.tree import DecisionTreeRegressor
from sklearn.metrics import make_scorer
from sklearn.grid_search import GridSearchCV
def fit_model(X, y):
""" Performs grid search over the 'max_depth' parameter for a
decision tree regressor trained on the input data [X, y]. """
# Create cross-validation sets from the training data
# sklearn version 0.18: ShuffleSplit(n_splits=10, test_size=0.1, train_size=None, random_state=None)
# sklearn versiin 0.17: ShuffleSplit(n, n_iter=10, test_size=0.1, train_size=None, random_state=None)
cv_sets = ShuffleSplit(X.shape[0], n_iter = 10, test_size = 0.20, random_state = 0)
# TODO: Create a decision tree regressor object
regressor = DecisionTreeRegressor()
# TODO: Create a dictionary for the parameter 'max_depth' with a range from 1 to 10
params = { 'max_depth': range(1, 11)}
# TODO: Transform 'performance_metric' into a scoring function using 'make_scorer'
scoring_fnc = make_scorer(performance_metric)
# TODO: Create the grid search cv object --> GridSearchCV()
# Make sure to include the right parameters in the object:
# (estimator, param_grid, scoring, cv) which have values 'regressor', 'params', 'scoring_fnc', and 'cv_sets' respectively.
grid = GridSearchCV(estimator=regressor, param_grid=params, scoring=scoring_fnc, cv=cv_sets)
# Fit the grid search object to the data to compute the optimal model
grid = grid.fit(X, y)
# Return the optimal model after fitting the data
return grid.best_estimator_
Once a model has been trained on a given set of data, it can now be used to make predictions on new sets of input data. In the case of a decision tree regressor, the model has learned what the best questions to ask about the input data are, and can respond with a prediction for the target variable. You can use these predictions to gain information about data where the value of the target variable is unknown — such as data the model was not trained on.
In [19]:
# Fit the training data to the model using grid search
reg = fit_model(X_train, y_train)
# Produce the value for 'max_depth'
print "Parameter 'max_depth' is {} for the optimal model.".format(reg.get_params()['max_depth'])
Hint: The answer comes from the output of the code snipped above.
Answer: The maximum depth for the optimal model is 4. This is same as what I guessed in question 6.
Imagine that you were a real estate agent in the Boston area looking to use this model to help price homes owned by your clients that they wish to sell. You have collected the following information from three of your clients:
| Feature | Client 1 | Client 2 | Client 3 |
|---|---|---|---|
| Total number of rooms in home | 5 rooms | 4 rooms | 8 rooms |
| Neighborhood poverty level (as %) | 17% | 32% | 3% |
| Student-teacher ratio of nearby schools | 15-to-1 | 22-to-1 | 12-to-1 |
Hint: Use the statistics you calculated in the Data Exploration section to help justify your response. Of the three clients, client 3 has has the biggest house, in the best public school neighborhood with the lowest poverty level; while client 2 has the smallest house, in a neighborhood with a relatively high poverty rate and not the best public schools.
Run the code block below to have your optimized model make predictions for each client's home.
In [20]:
# Produce a matrix for client data
client_data = [[5, 17, 15], # Client 1
[4, 32, 22], # Client 2
[8, 3, 12]] # Client 3
# Show predictions
for i, price in enumerate(reg.predict(client_data)):
print "Predicted selling price for Client {}'s home: ${:,.2f}".format(i+1, price)
In [21]:
clients_with_at_least_8_rooms = data[data['RM'] >= 8]
clients_with_8_rooms = clients_with_at_least_8_rooms[clients_with_at_least_8_rooms['RM'] < 9]
clients_with_low_poverty = clients_with_8_rooms[clients_with_8_rooms['LSTAT'] <= 4]
clients_with_low_poverty.head()
Out[21]:
Answer: The recommended price for each client is as follows:
| Client 1 | Client 2 | Client 3 | |
|---|---|---|---|
| Price(in $) | 401,577.27 | 229,086.67 | 950,154.55 |
The price seems to be reasonable:
Since Client 3 has biggest house with low poverty level in neighbourhood as well as the student to teacher ration is lowest. Given better value of all three features, Client 3 should have maximum selling price.
Client 2 has smallest house of 3, the poverty level is high as well as student to teacher ratio is large compared to others, hence Client 2 should have lowest selling price. Client 2 has lowest predicted price as well.
Client one falls in between in terms of all the features compared to other clients, hence Client 3 has price in between.
Also we can see above that if a client has 8 rooms and pverty level is below 4, the price varies between $789,600 to $101,430,0. Well since the price also depends on Student to teacher ratio and the above we can see the student to teacher ratio is somewhat comparable. Hence I think the model generalizes well.
An optimal model is not necessarily a robust model. Sometimes, a model is either too complex or too simple to sufficiently generalize to new data. Sometimes, a model could use a learning algorithm that is not appropriate for the structure of the data given. Other times, the data itself could be too noisy or contain too few samples to allow a model to adequately capture the target variable — i.e., the model is underfitted.
Run the code cell below to run the fit_model function ten times with different training and testing sets to see how the prediction for a specific client changes with respect to the data it's trained on.
In [22]:
vs.PredictTrials(features, prices, fit_model, client_data)
Hint: Take a look at the range in prices as calculated in the code snippet above. Some questions to answering:
Answer:
I think the model generalizes well and we see the prices with range of $69,044.61. It depends on whther the price with this range is acceptable or not.
The data might be relevant considering inflation but inflation is not the only point that needs to be considered.
front area, carpet area etc.$69,044.61 as not significant then we can consider this model robust enough.Refrences:
Note: Once you have completed all of the code implementations and successfully answered each question above, you may finalize your work by exporting the iPython Notebook as an HTML document. You can do this by using the menu above and navigating to
File -> Download as -> HTML (.html). Include the finished document along with this notebook as your submission.