This notebook shows the how tallies can be combined (added, subtracted, multiplied, etc.) using the Python API in order to create derived tallies. Since no covariance information is obtained, it is assumed that tallies are completely independent of one another when propagating uncertainties. The target problem is a simple pin cell.
In [1]:
import glob
from IPython.display import Image
import numpy as np
import openmc
First we need to define materials that will be used in the problem. Before defining a material, we must create nuclides that are used in the material.
In [2]:
# Instantiate some Nuclides
h1 = openmc.Nuclide('H1')
b10 = openmc.Nuclide('B10')
o16 = openmc.Nuclide('O16')
u235 = openmc.Nuclide('U235')
u238 = openmc.Nuclide('U238')
zr90 = openmc.Nuclide('Zr90')
With the nuclides we defined, we will now create three materials for the fuel, water, and cladding of the fuel pin.
In [3]:
# 1.6 enriched fuel
fuel = openmc.Material(name='1.6% Fuel')
fuel.set_density('g/cm3', 10.31341)
fuel.add_nuclide(u235, 3.7503e-4)
fuel.add_nuclide(u238, 2.2625e-2)
fuel.add_nuclide(o16, 4.6007e-2)
# borated water
water = openmc.Material(name='Borated Water')
water.set_density('g/cm3', 0.740582)
water.add_nuclide(h1, 4.9457e-2)
water.add_nuclide(o16, 2.4732e-2)
water.add_nuclide(b10, 8.0042e-6)
# zircaloy
zircaloy = openmc.Material(name='Zircaloy')
zircaloy.set_density('g/cm3', 6.55)
zircaloy.add_nuclide(zr90, 7.2758e-3)
With our three materials, we can now create a materials file object that can be exported to an actual XML file.
In [4]:
# Instantiate a Materials collection
materials_file = openmc.Materials((fuel, water, zircaloy))
# Export to "materials.xml"
materials_file.export_to_xml()
Now let's move on to the geometry. Our problem will have three regions for the fuel, the clad, and the surrounding coolant. The first step is to create the bounding surfaces -- in this case two cylinders and six reflective planes.
In [5]:
# Create cylinders for the fuel and clad
fuel_outer_radius = openmc.ZCylinder(x0=0.0, y0=0.0, R=0.39218)
clad_outer_radius = openmc.ZCylinder(x0=0.0, y0=0.0, R=0.45720)
# Create boundary planes to surround the geometry
# Use both reflective and vacuum boundaries to make life interesting
min_x = openmc.XPlane(x0=-0.63, boundary_type='reflective')
max_x = openmc.XPlane(x0=+0.63, boundary_type='reflective')
min_y = openmc.YPlane(y0=-0.63, boundary_type='reflective')
max_y = openmc.YPlane(y0=+0.63, boundary_type='reflective')
min_z = openmc.ZPlane(z0=-100., boundary_type='vacuum')
max_z = openmc.ZPlane(z0=+100., boundary_type='vacuum')
With the surfaces defined, we can now create cells that are defined by intersections of half-spaces created by the surfaces.
In [6]:
# Create a Universe to encapsulate a fuel pin
pin_cell_universe = openmc.Universe(name='1.6% Fuel Pin')
# Create fuel Cell
fuel_cell = openmc.Cell(name='1.6% Fuel')
fuel_cell.fill = fuel
fuel_cell.region = -fuel_outer_radius
pin_cell_universe.add_cell(fuel_cell)
# Create a clad Cell
clad_cell = openmc.Cell(name='1.6% Clad')
clad_cell.fill = zircaloy
clad_cell.region = +fuel_outer_radius & -clad_outer_radius
pin_cell_universe.add_cell(clad_cell)
# Create a moderator Cell
moderator_cell = openmc.Cell(name='1.6% Moderator')
moderator_cell.fill = water
moderator_cell.region = +clad_outer_radius
pin_cell_universe.add_cell(moderator_cell)
OpenMC requires that there is a "root" universe. Let us create a root cell that is filled by the pin cell universe and then assign it to the root universe.
In [7]:
# Create root Cell
root_cell = openmc.Cell(name='root cell')
root_cell.fill = pin_cell_universe
# Add boundary planes
root_cell.region = +min_x & -max_x & +min_y & -max_y & +min_z & -max_z
# Create root Universe
root_universe = openmc.Universe(universe_id=0, name='root universe')
root_universe.add_cell(root_cell)
We now must create a geometry that is assigned a root universe, put the geometry into a geometry file, and export it to XML.
In [8]:
# Create Geometry and set root Universe
geometry = openmc.Geometry()
geometry.root_universe = root_universe
In [9]:
# Export to "geometry.xml"
geometry.export_to_xml()
With the geometry and materials finished, we now just need to define simulation parameters. In this case, we will use 5 inactive batches and 15 active batches each with 2500 particles.
In [10]:
# OpenMC simulation parameters
batches = 20
inactive = 5
particles = 2500
# Instantiate a Settings object
settings_file = openmc.Settings()
settings_file.batches = batches
settings_file.inactive = inactive
settings_file.particles = particles
settings_file.output = {'tallies': True}
# Create an initial uniform spatial source distribution over fissionable zones
bounds = [-0.63, -0.63, -100., 0.63, 0.63, 100.]
uniform_dist = openmc.stats.Box(bounds[:3], bounds[3:], only_fissionable=True)
settings_file.source = openmc.source.Source(space=uniform_dist)
# Export to "settings.xml"
settings_file.export_to_xml()
Let us also create a plot file that we can use to verify that our pin cell geometry was created successfully.
In [11]:
# Instantiate a Plot
plot = openmc.Plot(plot_id=1)
plot.filename = 'materials-xy'
plot.origin = [0, 0, 0]
plot.width = [1.26, 1.26]
plot.pixels = [250, 250]
plot.color = 'mat'
# Instantiate a Plots collection and export to "plots.xml"
plot_file = openmc.Plots([plot])
plot_file.export_to_xml()
With the plots.xml file, we can now generate and view the plot. OpenMC outputs plots in .ppm format, which can be converted into a compressed format like .png with the convert utility.
In [12]:
# Run openmc in plotting mode
openmc.plot_geometry(output=False)
Out[12]:
In [13]:
# Convert OpenMC's funky ppm to png
!convert materials-xy.ppm materials-xy.png
# Display the materials plot inline
Image(filename='materials-xy.png')
Out[13]:
As we can see from the plot, we have a nice pin cell with fuel, cladding, and water! Before we run our simulation, we need to tell the code what we want to tally. The following code shows how to create a variety of tallies.
In [14]:
# Instantiate an empty Tallies object
tallies_file = openmc.Tallies()
In [15]:
# Create Tallies to compute microscopic multi-group cross-sections
# Instantiate energy filter for multi-group cross-section Tallies
energy_filter = openmc.EnergyFilter([0., 0.625, 20.0e6])
# Instantiate flux Tally in moderator and fuel
tally = openmc.Tally(name='flux')
tally.filters = [openmc.CellFilter([fuel_cell.id, moderator_cell.id])]
tally.filters.append(energy_filter)
tally.scores = ['flux']
tallies_file.append(tally)
# Instantiate reaction rate Tally in fuel
tally = openmc.Tally(name='fuel rxn rates')
tally.filters = [openmc.CellFilter([fuel_cell.id])]
tally.filters.append(energy_filter)
tally.scores = ['nu-fission', 'scatter']
tally.nuclides = [u238, u235]
tallies_file.append(tally)
# Instantiate reaction rate Tally in moderator
tally = openmc.Tally(name='moderator rxn rates')
tally.filters = [openmc.CellFilter([moderator_cell.id])]
tally.filters.append(energy_filter)
tally.scores = ['absorption', 'total']
tally.nuclides = [o16, h1]
tallies_file.append(tally)
# Instantiate a tally mesh
mesh = openmc.Mesh(mesh_id=1)
mesh.type = 'regular'
mesh.dimension = [1, 1, 1]
mesh.lower_left = [-0.63, -0.63, -100.]
mesh.width = [1.26, 1.26, 200.]
mesh_filter = openmc.MeshFilter(mesh)
# Instantiate thermal, fast, and total leakage tallies
leak = openmc.Tally(name='leakage')
leak.filters = [mesh_filter]
leak.scores = ['current']
tallies_file.append(leak)
thermal_leak = openmc.Tally(name='thermal leakage')
thermal_leak.filters = [mesh_filter, openmc.EnergyFilter([0., 0.625])]
thermal_leak.scores = ['current']
tallies_file.append(thermal_leak)
fast_leak = openmc.Tally(name='fast leakage')
fast_leak.filters = [mesh_filter, openmc.EnergyFilter([0.625, 20.0e6])]
fast_leak.scores = ['current']
tallies_file.append(fast_leak)
In [16]:
# K-Eigenvalue (infinity) tallies
fiss_rate = openmc.Tally(name='fiss. rate')
abs_rate = openmc.Tally(name='abs. rate')
fiss_rate.scores = ['nu-fission']
abs_rate.scores = ['absorption']
tallies_file += (fiss_rate, abs_rate)
In [17]:
# Resonance Escape Probability tallies
therm_abs_rate = openmc.Tally(name='therm. abs. rate')
therm_abs_rate.scores = ['absorption']
therm_abs_rate.filters = [openmc.EnergyFilter([0., 0.625])]
tallies_file.append(therm_abs_rate)
In [18]:
# Thermal Flux Utilization tallies
fuel_therm_abs_rate = openmc.Tally(name='fuel therm. abs. rate')
fuel_therm_abs_rate.scores = ['absorption']
fuel_therm_abs_rate.filters = [openmc.EnergyFilter([0., 0.625]),
openmc.CellFilter([fuel_cell.id])]
tallies_file.append(fuel_therm_abs_rate)
In [19]:
# Fast Fission Factor tallies
therm_fiss_rate = openmc.Tally(name='therm. fiss. rate')
therm_fiss_rate.scores = ['nu-fission']
therm_fiss_rate.filters = [openmc.EnergyFilter([0., 0.625])]
tallies_file.append(therm_fiss_rate)
In [20]:
# Instantiate energy filter to illustrate Tally slicing
fine_energy_filter = openmc.EnergyFilter(np.logspace(np.log10(1e-2), np.log10(20.0e6), 10))
# Instantiate flux Tally in moderator and fuel
tally = openmc.Tally(name='need-to-slice')
tally.filters = [openmc.CellFilter(bins=[fuel_cell.id, moderator_cell.id])]
tally.filters.append(fine_energy_filter)
tally.scores = ['nu-fission', 'scatter']
tally.nuclides = [h1, u238]
tallies_file.append(tally)
In [21]:
# Export to "tallies.xml"
tallies_file.export_to_xml()
Now we a have a complete set of inputs, so we can go ahead and run our simulation.
In [22]:
# Remove old HDF5 (summary, statepoint) files
!rm statepoint.*
# Run OpenMC!
openmc.run()
Out[22]:
Our simulation ran successfully and created a statepoint file with all the tally data in it. We begin our analysis here loading the statepoint file and 'reading' the results. By default, the tally results are not read into memory because they might be large, even large enough to exceed the available memory on a computer.
In [23]:
# Load the statepoint file
sp = openmc.StatePoint('statepoint.20.h5')
We have a tally of the total fission rate and the total absorption rate, so we can calculate k-eff as: $$k_{eff} = \frac{\langle \nu \Sigma_f \phi \rangle}{\langle \Sigma_a \phi \rangle + \langle L \rangle}$$ In this notation, $\langle \cdot \rangle^a_b$ represents an OpenMC that is integrated over region $a$ and energy range $b$. If $a$ or $b$ is not reported, it means the value represents an integral over all space or all energy, respectively.
In [24]:
# Get the fission and absorption rate tallies
fiss_rate = sp.get_tally(name='fiss. rate')
abs_rate = sp.get_tally(name='abs. rate')
# Get the leakage tally
leak = sp.get_tally(name='leakage')
leak = leak.summation(filter_type=openmc.SurfaceFilter, remove_filter=True)
leak = leak.summation(filter_type=openmc.MeshFilter, remove_filter=True)
# Compute k-infinity using tally arithmetic
keff = fiss_rate / (abs_rate + leak)
keff.get_pandas_dataframe()
Out[24]:
Notice that even though the neutron production rate, absorption rate, and current are separate tallies, we still get a first-order estimate of the uncertainty on the quotient of them automatically!
Often in textbooks you'll see k-eff represented using the six-factor formula $$k_{eff} = p \epsilon f \eta P_{FNL} P_{TNL}.$$ Let's analyze each of these factors, starting with the resonance escape probability which is defined as $$p=\frac{\langle\Sigma_a\phi\rangle_T + \langle L \rangle_T}{\langle\Sigma_a\phi\rangle + \langle L \rangle_T}$$ where the subscript $T$ means thermal energies.
In [25]:
# Compute resonance escape probability using tally arithmetic
therm_abs_rate = sp.get_tally(name='therm. abs. rate')
thermal_leak = sp.get_tally(name='thermal leakage')
thermal_leak = thermal_leak.summation(filter_type=openmc.SurfaceFilter, remove_filter=True)
thermal_leak = thermal_leak.summation(filter_type=openmc.MeshFilter, remove_filter=True)
res_esc = (therm_abs_rate + thermal_leak) / (abs_rate + thermal_leak)
res_esc.get_pandas_dataframe()
Out[25]:
The fast fission factor can be calculated as $$\epsilon=\frac{\langle\nu\Sigma_f\phi\rangle}{\langle\nu\Sigma_f\phi\rangle_T}$$
In [26]:
# Compute fast fission factor factor using tally arithmetic
therm_fiss_rate = sp.get_tally(name='therm. fiss. rate')
fast_fiss = fiss_rate / therm_fiss_rate
fast_fiss.get_pandas_dataframe()
Out[26]:
The thermal flux utilization is calculated as $$f=\frac{\langle\Sigma_a\phi\rangle^F_T}{\langle\Sigma_a\phi\rangle_T}$$ where the superscript $F$ denotes fuel.
In [27]:
# Compute thermal flux utilization factor using tally arithmetic
fuel_therm_abs_rate = sp.get_tally(name='fuel therm. abs. rate')
therm_util = fuel_therm_abs_rate / therm_abs_rate
therm_util.get_pandas_dataframe()
Out[27]:
The next factor is the number of fission neutrons produced per absorption in fuel, calculated as $$\eta = \frac{\langle \nu\Sigma_f\phi \rangle_T}{\langle \Sigma_a \phi \rangle^F_T}$$
In [28]:
# Compute neutrons produced per absorption (eta) using tally arithmetic
eta = therm_fiss_rate / fuel_therm_abs_rate
eta.get_pandas_dataframe()
Out[28]:
There are two leakage factors to account for fast and thermal leakage. The fast non-leakage probability is computed as $$P_{FNL} = \frac{\langle \Sigma_a\phi \rangle + \langle L \rangle_T}{\langle \Sigma_a \phi \rangle + \langle L \rangle}$$
In [29]:
p_fnl = (abs_rate + thermal_leak) / (abs_rate + leak)
p_fnl.get_pandas_dataframe()
Out[29]:
The final factor is the thermal non-leakage probability and is computed as $$P_{TNL} = \frac{\langle \Sigma_a\phi \rangle_T}{\langle \Sigma_a \phi \rangle_T + \langle L \rangle_T}$$
In [30]:
p_tnl = therm_abs_rate / (therm_abs_rate + thermal_leak)
p_tnl.get_pandas_dataframe()
Out[30]:
Now we can calculate $k_{eff}$ using the product of the factors form the four-factor formula.
In [31]:
keff = res_esc * fast_fiss * therm_util * eta * p_fnl * p_tnl
keff.get_pandas_dataframe()
Out[31]:
We see that the value we've obtained here has exactly the same mean as before. However, because of the way it was calculated, the standard deviation appears to be larger.
Let's move on to a more complicated example now. Before we set up tallies to get reaction rates in the fuel and moderator in two energy groups for two different nuclides. We can use tally arithmetic to divide each of these reaction rates by the flux to get microscopic multi-group cross sections.
In [32]:
# Compute microscopic multi-group cross-sections
flux = sp.get_tally(name='flux')
flux = flux.get_slice(filters=[openmc.CellFilter], filter_bins=[(fuel_cell.id,)])
fuel_rxn_rates = sp.get_tally(name='fuel rxn rates')
mod_rxn_rates = sp.get_tally(name='moderator rxn rates')
In [33]:
fuel_xs = fuel_rxn_rates / flux
fuel_xs.get_pandas_dataframe()
Out[33]:
We see that when the two tallies with multiple bins were divided, the derived tally contains the outer product of the combinations. If the filters/scores are the same, no outer product is needed. The get_values(...) method allows us to obtain a subset of tally scores. In the following example, we obtain just the neutron production microscopic cross sections.
In [34]:
# Show how to use Tally.get_values(...) with a CrossScore
nu_fiss_xs = fuel_xs.get_values(scores=['(nu-fission / flux)'])
print(nu_fiss_xs)
The same idea can be used not only for scores but also for filters and nuclides.
In [35]:
# Show how to use Tally.get_values(...) with a CrossScore and CrossNuclide
u235_scatter_xs = fuel_xs.get_values(nuclides=['(U235 / total)'],
scores=['(scatter / flux)'])
print(u235_scatter_xs)
In [36]:
# Show how to use Tally.get_values(...) with a CrossFilter and CrossScore
fast_scatter_xs = fuel_xs.get_values(filters=[openmc.EnergyFilter],
filter_bins=[((0.625, 20.0e6),)],
scores=['(scatter / flux)'])
print(fast_scatter_xs)
A more advanced method is to use get_slice(...) to create a new derived tally that is a subset of an existing tally. This has the benefit that we can use get_pandas_dataframe() to see the tallies in a more human-readable format.
In [37]:
# "Slice" the nu-fission data into a new derived Tally
nu_fission_rates = fuel_rxn_rates.get_slice(scores=['nu-fission'])
nu_fission_rates.get_pandas_dataframe()
Out[37]:
In [38]:
# "Slice" the H-1 scatter data in the moderator Cell into a new derived Tally
need_to_slice = sp.get_tally(name='need-to-slice')
slice_test = need_to_slice.get_slice(scores=['scatter'], nuclides=['H1'],
filters=[openmc.CellFilter], filter_bins=[(moderator_cell.id,)])
slice_test.get_pandas_dataframe()
Out[38]: