In [2]:
from hydroffice.ssp import project
In [3]:
import logging
logger = logging.getLogger()
logger.setLevel(logging.NOTSET)
ch = logging.StreamHandler()
ch.setLevel(logging.DEBUG) # change to WARNING to reduce verbosity, DEBUG for high verbosity
ch_formatter = logging.Formatter('%(levelname)-9s %(name)s.%(funcName)s:%(lineno)d > %(message)s')
ch.setFormatter(ch_formatter)
logger.addHandler(ch)
In [4]:
prj = project.Project(with_listeners=False, with_woa09=False, with_rtofs=False)
prj.release()
DEBUG:hydroffice.ssp.settings:config.ini: skipping comment line:
##############################################################
DEBUG hydroffice.ssp.settings.load_config:128 > config.ini: skipping comment line:
##############################################################
DEBUG:hydroffice.ssp.settings:config.ini: skipping comment line:
### Configuration file for SSP library ##
DEBUG hydroffice.ssp.settings.load_config:128 > config.ini: skipping comment line:
### Configuration file for SSP library ##
DEBUG:hydroffice.ssp.settings:config.ini: skipping comment line:
### ##
DEBUG hydroffice.ssp.settings.load_config:128 > config.ini: skipping comment line:
### ##
DEBUG:hydroffice.ssp.settings:config.ini: skipping comment line:
### This file is loaded by project.py ##
DEBUG hydroffice.ssp.settings.load_config:128 > config.ini: skipping comment line:
### This file is loaded by project.py ##
DEBUG:hydroffice.ssp.settings:config.ini: skipping comment line:
### Lines starting with '#' or a white-space are ignored ##
DEBUG hydroffice.ssp.settings.load_config:128 > config.ini: skipping comment line:
### Lines starting with '#' or a white-space are ignored ##
DEBUG:hydroffice.ssp.settings:config.ini: skipping comment line:
##############################################################
DEBUG hydroffice.ssp.settings.load_config:128 > config.ini: skipping comment line:
##############################################################
DEBUG:hydroffice.ssp.settings:config.ini: skipping zero length line
DEBUG hydroffice.ssp.settings.load_config:125 > config.ini: skipping zero length line
DEBUG:hydroffice.ssp.settings:config.ini: skipping comment line:
### General settings ###
DEBUG hydroffice.ssp.settings.load_config:128 > config.ini: skipping comment line:
### General settings ###
DEBUG:hydroffice.ssp.settings:config.ini: skipping comment line:
#
DEBUG hydroffice.ssp.settings.load_config:128 > config.ini: skipping comment line:
#
DEBUG:hydroffice.ssp.settings:config.ini: skipping comment line:
# oceanographic data sources: RTOFS, WOA09, WOA13 [default value if empty: WOA09]
DEBUG hydroffice.ssp.settings.load_config:128 > config.ini: skipping comment line:
# oceanographic data sources: RTOFS, WOA09, WOA13 [default value if empty: WOA09]
DEBUG:hydroffice.ssp.settings:config.ini: skipping comment line:
# -> RTOFS: a real-time model (requires internet connectivity).
DEBUG hydroffice.ssp.settings.load_config:128 > config.ini: skipping comment line:
# -> RTOFS: a real-time model (requires internet connectivity).
DEBUG:hydroffice.ssp.settings:config.ini: skipping comment line:
# -> WOA09: oceanographic atlas (usually installed together with the SSP library).
DEBUG hydroffice.ssp.settings.load_config:128 > config.ini: skipping comment line:
# -> WOA09: oceanographic atlas (usually installed together with the SSP library).
DEBUG:hydroffice.ssp.settings:config.ini: skipping comment line:
# -> WOA13: oceanographic atlas (future development)
DEBUG hydroffice.ssp.settings.load_config:128 > config.ini: skipping comment line:
# -> WOA13: oceanographic atlas (future development)
DEBUG:hydroffice.ssp.settings:config.ini: valid pair: -> ssp_extension_source +
DEBUG hydroffice.ssp.settings.load_config:139 > config.ini: valid pair: -> ssp_extension_source +
DEBUG:hydroffice.ssp.settings:config.ini: valid pair: -> ssp_salinity_source +
DEBUG hydroffice.ssp.settings.load_config:139 > config.ini: valid pair: -> ssp_salinity_source +
DEBUG:hydroffice.ssp.settings:config.ini: valid pair: -> ssp_temp_sal_source +
DEBUG hydroffice.ssp.settings.load_config:139 > config.ini: valid pair: -> ssp_temp_sal_source +
DEBUG:hydroffice.ssp.settings:config.ini: valid pair: -> sis_server_source +
DEBUG hydroffice.ssp.settings.load_config:139 > config.ini: valid pair: -> sis_server_source +
DEBUG:hydroffice.ssp.settings:config.ini: skipping comment line:
# Path to WOA09 grid files [empty: default path]
DEBUG hydroffice.ssp.settings.load_config:128 > config.ini: skipping comment line:
# Path to WOA09 grid files [empty: default path]
DEBUG:hydroffice.ssp.settings:config.ini: valid pair: -> woa_path +
DEBUG hydroffice.ssp.settings.load_config:139 > config.ini: valid pair: -> woa_path +
INFO:hydroffice.ssp.settings:default woa path: C:\Users\gmas\Documents\HydrOffice 0.2.0\SSP 0.2.0\Atlases\woa09
INFO hydroffice.ssp.settings.load_config:182 > default woa path: C:\Users\gmas\Documents\HydrOffice 0.2.0\SSP 0.2.0\Atlases\woa09
DEBUG:hydroffice.ssp.settings:config.ini: skipping comment line:
# Profile creation: Portion of the sensor cast to use:
DEBUG hydroffice.ssp.settings.load_config:128 > config.ini: skipping comment line:
# Profile creation: Portion of the sensor cast to use:
DEBUG:hydroffice.ssp.settings:config.ini: skipping comment line:
# -> down: downcast [default if empty]
DEBUG hydroffice.ssp.settings.load_config:128 > config.ini: skipping comment line:
# -> down: downcast [default if empty]
DEBUG:hydroffice.ssp.settings:config.ini: skipping comment line:
# -> up: upcast
DEBUG hydroffice.ssp.settings.load_config:128 > config.ini: skipping comment line:
# -> up: upcast
DEBUG:hydroffice.ssp.settings:config.ini: skipping zero length line
DEBUG hydroffice.ssp.settings.load_config:125 > config.ini: skipping zero length line
DEBUG:hydroffice.ssp.settings:config.ini: skipping comment line:
### Processing settings ###
DEBUG hydroffice.ssp.settings.load_config:128 > config.ini: skipping comment line:
### Processing settings ###
DEBUG:hydroffice.ssp.settings:config.ini: skipping comment line:
#
DEBUG hydroffice.ssp.settings.load_config:128 > config.ini: skipping comment line:
#
DEBUG:hydroffice.ssp.settings:config.ini: valid pair: -> ssp_up_or_down +
DEBUG hydroffice.ssp.settings.load_config:139 > config.ini: valid pair: -> ssp_up_or_down +
DEBUG:hydroffice.ssp.settings:config.ini: skipping comment line:
# Profile export: True -> automatically export certain file formats
DEBUG hydroffice.ssp.settings.load_config:128 > config.ini: skipping comment line:
# Profile export: True -> automatically export certain file formats
DEBUG:hydroffice.ssp.settings:config.ini: skipping comment line:
# after network transmission.
DEBUG hydroffice.ssp.settings.load_config:128 > config.ini: skipping comment line:
# after network transmission.
DEBUG:hydroffice.ssp.settings:config.ini: skipping comment line:
# False [default]
DEBUG hydroffice.ssp.settings.load_config:128 > config.ini: skipping comment line:
# False [default]
DEBUG:hydroffice.ssp.settings:config.ini: valid pair: -> auto_export_on_send +
DEBUG hydroffice.ssp.settings.load_config:139 > config.ini: valid pair: -> auto_export_on_send +
DEBUG:hydroffice.ssp.settings:config.ini: skipping comment line:
# Profile export: True -> automatically export certain file formats
DEBUG hydroffice.ssp.settings.load_config:128 > config.ini: skipping comment line:
# Profile export: True -> automatically export certain file formats
DEBUG:hydroffice.ssp.settings:config.ini: skipping comment line:
# when the SIS server sends a cast. [Default]
DEBUG hydroffice.ssp.settings.load_config:128 > config.ini: skipping comment line:
# when the SIS server sends a cast. [Default]
DEBUG:hydroffice.ssp.settings:config.ini: skipping comment line:
# False
DEBUG hydroffice.ssp.settings.load_config:128 > config.ini: skipping comment line:
# False
DEBUG:hydroffice.ssp.settings:config.ini: valid pair: -> auto_export_on_server_send +
DEBUG hydroffice.ssp.settings.load_config:139 > config.ini: valid pair: -> auto_export_on_server_send +
DEBUG:hydroffice.ssp.settings:config.ini: skipping comment line:
# Profile export: True -> user specifies the file on export
DEBUG hydroffice.ssp.settings.load_config:128 > config.ini: skipping comment line:
# Profile export: True -> user specifies the file on export
DEBUG:hydroffice.ssp.settings:config.ini: skipping comment line:
# False -> system creates file based on input name [default]
DEBUG hydroffice.ssp.settings.load_config:128 > config.ini: skipping comment line:
# False -> system creates file based on input name [default]
DEBUG:hydroffice.ssp.settings:config.ini: skipping comment line:
# WARNING: does not apply to "auto_export_on_server_send".
DEBUG hydroffice.ssp.settings.load_config:128 > config.ini: skipping comment line:
# WARNING: does not apply to "auto_export_on_server_send".
DEBUG:hydroffice.ssp.settings:config.ini: valid pair: -> user_export_prompt_filename +
DEBUG hydroffice.ssp.settings.load_config:139 > config.ini: valid pair: -> user_export_prompt_filename +
DEBUG:hydroffice.ssp.settings:config.ini: skipping zero length line
DEBUG hydroffice.ssp.settings.load_config:125 > config.ini: skipping zero length line
DEBUG:hydroffice.ssp.settings:config.ini: skipping comment line:
### Caris File settings ###
DEBUG hydroffice.ssp.settings.load_config:128 > config.ini: skipping comment line:
### Caris File settings ###
DEBUG:hydroffice.ssp.settings:config.ini: skipping comment line:
#
DEBUG hydroffice.ssp.settings.load_config:128 > config.ini: skipping comment line:
#
DEBUG:hydroffice.ssp.settings:config.ini: skipping comment line:
# If true, update the caris file in output
DEBUG hydroffice.ssp.settings.load_config:128 > config.ini: skipping comment line:
# If true, update the caris file in output
DEBUG:hydroffice.ssp.settings:config.ini: skipping comment line:
# if false, overwrite such a file [default]
DEBUG hydroffice.ssp.settings.load_config:128 > config.ini: skipping comment line:
# if false, overwrite such a file [default]
DEBUG:hydroffice.ssp.settings:config.ini: valid pair: -> user_append_caris_file +
DEBUG hydroffice.ssp.settings.load_config:139 > config.ini: valid pair: -> user_append_caris_file +
DEBUG:hydroffice.ssp.settings:config.ini: skipping comment line:
# If true, update the caris file in output
DEBUG hydroffice.ssp.settings.load_config:128 > config.ini: skipping comment line:
# If true, update the caris file in output
DEBUG:hydroffice.ssp.settings:config.ini: skipping comment line:
# if false, overwrite such a file [default]
DEBUG hydroffice.ssp.settings.load_config:128 > config.ini: skipping comment line:
# if false, overwrite such a file [default]
DEBUG:hydroffice.ssp.settings:config.ini: valid pair: -> server_append_caris_file +
DEBUG hydroffice.ssp.settings.load_config:139 > config.ini: valid pair: -> server_append_caris_file +
DEBUG:hydroffice.ssp.settings:config.ini: skipping zero length line
DEBUG hydroffice.ssp.settings.load_config:125 > config.ini: skipping zero length line
DEBUG:hydroffice.ssp.settings:config.ini: skipping comment line:
### Recipients settings ###
DEBUG hydroffice.ssp.settings.load_config:128 > config.ini: skipping comment line:
### Recipients settings ###
DEBUG:hydroffice.ssp.settings:config.ini: skipping comment line:
#
DEBUG hydroffice.ssp.settings.load_config:128 > config.ini: skipping comment line:
#
DEBUG:hydroffice.ssp.settings:config.ini: skipping comment line:
# Client list: each row is a SSP recipient with variable protocols.
DEBUG hydroffice.ssp.settings.load_config:128 > config.ini: skipping comment line:
# Client list: each row is a SSP recipient with variable protocols.
DEBUG:hydroffice.ssp.settings:config.ini: valid pair: -> client_list + "Local test":127.0.0.1:4001:SIS
DEBUG hydroffice.ssp.settings.load_config:139 > config.ini: valid pair: -> client_list + "Local test":127.0.0.1:4001:SIS
INFO:hydroffice.ssp.pkg_clients:new client: "Local test"(127.0.0.1:4001) SIS
INFO hydroffice.ssp.pkg_clients.__init__:18 > new client: "Local test"(127.0.0.1:4001) SIS
DEBUG:hydroffice.ssp.settings:config.ini: skipping comment line:
#client_list="Langseth SIS":192.168.3.101:4001:SIS
DEBUG hydroffice.ssp.settings.load_config:128 > config.ini: skipping comment line:
#client_list="Langseth SIS":192.168.3.101:4001:SIS
DEBUG:hydroffice.ssp.settings:config.ini: skipping comment line:
#client_list="R/V Falkor EM302":10.23.10.50:4001:SIS
DEBUG hydroffice.ssp.settings.load_config:128 > config.ini: skipping comment line:
#client_list="R/V Falkor EM302":10.23.10.50:4001:SIS
DEBUG:hydroffice.ssp.settings:config.ini: skipping comment line:
#client_list="R/V Falkor EM710":10.23.10.51:4001:SIS
DEBUG hydroffice.ssp.settings.load_config:128 > config.ini: skipping comment line:
#client_list="R/V Falkor EM710":10.23.10.51:4001:SIS
DEBUG:hydroffice.ssp.settings:config.ini: skipping comment line:
#client_list="R/V Revelle EM122":10.110.149.50:4001:SIS
DEBUG hydroffice.ssp.settings.load_config:128 > config.ini: skipping comment line:
#client_list="R/V Revelle EM122":10.110.149.50:4001:SIS
DEBUG:hydroffice.ssp.settings:config.ini: skipping comment line:
#client_list="Ophelia SIS":192.168.8.213:4001:SIS
DEBUG hydroffice.ssp.settings.load_config:128 > config.ini: skipping comment line:
#client_list="Ophelia SIS":192.168.8.213:4001:SIS
DEBUG:hydroffice.ssp.settings:config.ini: skipping comment line:
#client_list="Ophelia HYPACK":192.168.8.213:2006:HYPACK
DEBUG hydroffice.ssp.settings.load_config:128 > config.ini: skipping comment line:
#client_list="Ophelia HYPACK":192.168.8.213:2006:HYPACK
DEBUG:hydroffice.ssp.settings:config.ini: skipping comment line:
#client_list="Ophelia PDS2000":192.168.8.213:2002:PDS2000
DEBUG hydroffice.ssp.settings.load_config:128 > config.ini: skipping comment line:
#client_list="Ophelia PDS2000":192.168.8.213:2002:PDS2000
DEBUG:hydroffice.ssp.settings:config.ini: skipping comment line:
#client_list="Ophelia QINSY":192.168.8.213:14001:QINSY
DEBUG hydroffice.ssp.settings.load_config:128 > config.ini: skipping comment line:
#client_list="Ophelia QINSY":192.168.8.213:14001:QINSY
DEBUG:hydroffice.ssp.settings:config.ini: skipping zero length line
DEBUG hydroffice.ssp.settings.load_config:125 > config.ini: skipping zero length line
DEBUG:hydroffice.ssp.settings:config.ini: skipping comment line:
### SIS settings ###
DEBUG hydroffice.ssp.settings.load_config:128 > config.ini: skipping comment line:
### SIS settings ###
DEBUG:hydroffice.ssp.settings:config.ini: skipping comment line:
#
DEBUG hydroffice.ssp.settings.load_config:128 > config.ini: skipping comment line:
#
DEBUG:hydroffice.ssp.settings:config.ini: skipping comment line:
# SIS: port to listen to for broadcasts [default: 16103]
DEBUG hydroffice.ssp.settings.load_config:128 > config.ini: skipping comment line:
# SIS: port to listen to for broadcasts [default: 16103]
DEBUG:hydroffice.ssp.settings:config.ini: valid pair: -> km_listen_port +
DEBUG hydroffice.ssp.settings.load_config:139 > config.ini: valid pair: -> km_listen_port +
DEBUG:hydroffice.ssp.settings:config.ini: skipping comment line:
# SIS: listen interval for broadcasts [default: 1]
DEBUG hydroffice.ssp.settings.load_config:128 > config.ini: skipping comment line:
# SIS: listen interval for broadcasts [default: 1]
DEBUG:hydroffice.ssp.settings:config.ini: valid pair: -> km_listen_timeout +
DEBUG hydroffice.ssp.settings.load_config:139 > config.ini: valid pair: -> km_listen_timeout +
DEBUG:hydroffice.ssp.settings:config.ini: skipping comment line:
# Immediate SSP application for SIS.
DEBUG hydroffice.ssp.settings.load_config:128 > config.ini: skipping comment line:
# Immediate SSP application for SIS.
DEBUG:hydroffice.ssp.settings:config.ini: skipping comment line:
# -> True: casts formatted for immediate application (not user confirmation). [default]
DEBUG hydroffice.ssp.settings.load_config:128 > config.ini: skipping comment line:
# -> True: casts formatted for immediate application (not user confirmation). [default]
DEBUG:hydroffice.ssp.settings:config.ini: skipping comment line:
# -> False: SIS requests user confirmation prior to application.
DEBUG hydroffice.ssp.settings.load_config:128 > config.ini: skipping comment line:
# -> False: SIS requests user confirmation prior to application.
DEBUG:hydroffice.ssp.settings:config.ini: skipping comment line:
# WARNING: in Server Mode, casts always formatted for immediate SIS application.
DEBUG hydroffice.ssp.settings.load_config:128 > config.ini: skipping comment line:
# WARNING: in Server Mode, casts always formatted for immediate SIS application.
DEBUG:hydroffice.ssp.settings:config.ini: valid pair: -> sis_auto_apply_manual_casts +
DEBUG hydroffice.ssp.settings.load_config:139 > config.ini: valid pair: -> sis_auto_apply_manual_casts +
DEBUG:hydroffice.ssp.settings:config.ini: skipping comment line:
# SIS server: augment SSP with surface sound speed measurements from depth datagram [true]
DEBUG hydroffice.ssp.settings.load_config:128 > config.ini: skipping comment line:
# SIS server: augment SSP with surface sound speed measurements from depth datagram [true]
DEBUG:hydroffice.ssp.settings:config.ini: valid pair: -> server_apply_surface_sound_speed +
DEBUG hydroffice.ssp.settings.load_config:139 > config.ini: valid pair: -> server_apply_surface_sound_speed +
DEBUG:hydroffice.ssp.settings:config.ini: skipping zero length line
DEBUG hydroffice.ssp.settings.load_config:125 > config.ini: skipping zero length line
DEBUG:hydroffice.ssp.settings:config.ini: skipping comment line:
### Sippican settings ###
DEBUG hydroffice.ssp.settings.load_config:128 > config.ini: skipping comment line:
### Sippican settings ###
DEBUG:hydroffice.ssp.settings:config.ini: skipping comment line:
#
DEBUG hydroffice.ssp.settings.load_config:128 > config.ini: skipping comment line:
#
DEBUG:hydroffice.ssp.settings:config.ini: skipping comment line:
# Sippican: port to listen to for input [default: 2002]
DEBUG hydroffice.ssp.settings.load_config:128 > config.ini: skipping comment line:
# Sippican: port to listen to for input [default: 2002]
DEBUG:hydroffice.ssp.settings:config.ini: valid pair: -> sippican_listen_port +
DEBUG hydroffice.ssp.settings.load_config:139 > config.ini: valid pair: -> sippican_listen_port +
DEBUG:hydroffice.ssp.settings:config.ini: skipping comment line:
# Sippican: listen interval for input [default: 1]
DEBUG hydroffice.ssp.settings.load_config:128 > config.ini: skipping comment line:
# Sippican: listen interval for input [default: 1]
DEBUG:hydroffice.ssp.settings:config.ini: valid pair: -> sippican_listen_timeout +
DEBUG hydroffice.ssp.settings.load_config:139 > config.ini: valid pair: -> sippican_listen_timeout +
DEBUG:hydroffice.ssp.settings:config.ini: skipping zero length line
DEBUG hydroffice.ssp.settings.load_config:125 > config.ini: skipping zero length line
DEBUG:hydroffice.ssp.settings:config.ini: skipping comment line:
### MVP settings ###
DEBUG hydroffice.ssp.settings.load_config:128 > config.ini: skipping comment line:
### MVP settings ###
DEBUG:hydroffice.ssp.settings:config.ini: skipping comment line:
# MVP: port and ip to listen to for input
DEBUG hydroffice.ssp.settings.load_config:128 > config.ini: skipping comment line:
# MVP: port and ip to listen to for input
DEBUG:hydroffice.ssp.settings:config.ini: valid pair: -> mvp_ip_address + 127.0.0.1
DEBUG hydroffice.ssp.settings.load_config:139 > config.ini: valid pair: -> mvp_ip_address + 127.0.0.1
DEBUG:hydroffice.ssp.settings:config.ini: valid pair: -> mvp_listen_port + 2006
DEBUG hydroffice.ssp.settings.load_config:139 > config.ini: valid pair: -> mvp_listen_port + 2006
DEBUG:hydroffice.ssp.settings:config.ini: skipping comment line:
# MVP: listen interval for input
DEBUG hydroffice.ssp.settings.load_config:128 > config.ini: skipping comment line:
# MVP: listen interval for input
DEBUG:hydroffice.ssp.settings:config.ini: valid pair: -> mvp_listen_timeout + 1
DEBUG hydroffice.ssp.settings.load_config:139 > config.ini: valid pair: -> mvp_listen_timeout + 1
DEBUG:hydroffice.ssp.settings:config.ini: skipping comment line:
# MVP: transmission protocol, currently supported:
DEBUG hydroffice.ssp.settings.load_config:128 > config.ini: skipping comment line:
# MVP: transmission protocol, currently supported:
DEBUG:hydroffice.ssp.settings:config.ini: skipping comment line:
# -> NAVO_ISS60 (transmits data in chunks to avoid overflow of UDP packet max size, necessary for deep ocean)
DEBUG hydroffice.ssp.settings.load_config:128 > config.ini: skipping comment line:
# -> NAVO_ISS60 (transmits data in chunks to avoid overflow of UDP packet max size, necessary for deep ocean)
DEBUG:hydroffice.ssp.settings:config.ini: skipping comment line:
# -> UNDEFINED (transmits entire datagram at once, okay for short casts)
DEBUG hydroffice.ssp.settings.load_config:128 > config.ini: skipping comment line:
# -> UNDEFINED (transmits entire datagram at once, okay for short casts)
DEBUG:hydroffice.ssp.settings:config.ini: valid pair: -> mvp_transmission_protocol + NAVO_ISS60
DEBUG hydroffice.ssp.settings.load_config:139 > config.ini: valid pair: -> mvp_transmission_protocol + NAVO_ISS60
DEBUG:hydroffice.ssp.settings:config.ini: skipping comment line:
# MVP: data format, currently supported:
DEBUG hydroffice.ssp.settings.load_config:128 > config.ini: skipping comment line:
# MVP: data format, currently supported:
DEBUG:hydroffice.ssp.settings:config.ini: skipping comment line:
# -> CALC
DEBUG hydroffice.ssp.settings.load_config:128 > config.ini: skipping comment line:
# -> CALC
DEBUG:hydroffice.ssp.settings:config.ini: skipping comment line:
# -> ASVP
DEBUG hydroffice.ssp.settings.load_config:128 > config.ini: skipping comment line:
# -> ASVP
DEBUG:hydroffice.ssp.settings:config.ini: skipping comment line:
# -> S12
DEBUG hydroffice.ssp.settings.load_config:128 > config.ini: skipping comment line:
# -> S12
DEBUG:hydroffice.ssp.settings:config.ini: valid pair: -> mvp_format + S12
DEBUG hydroffice.ssp.settings.load_config:139 > config.ini: valid pair: -> mvp_format + S12
DEBUG:hydroffice.ssp.settings:config.ini: skipping comment line:
# MVP: raw sensor data (not currently used):
DEBUG hydroffice.ssp.settings.load_config:128 > config.ini: skipping comment line:
# MVP: raw sensor data (not currently used):
DEBUG:hydroffice.ssp.settings:config.ini: valid pair: -> mvp_winch_port + 3601
DEBUG hydroffice.ssp.settings.load_config:139 > config.ini: valid pair: -> mvp_winch_port + 3601
DEBUG:hydroffice.ssp.settings:config.ini: valid pair: -> mvp_fish_port + 3602
DEBUG hydroffice.ssp.settings.load_config:139 > config.ini: valid pair: -> mvp_fish_port + 3602
DEBUG:hydroffice.ssp.settings:config.ini: valid pair: -> mvp_nav_port + 3603
DEBUG hydroffice.ssp.settings.load_config:139 > config.ini: valid pair: -> mvp_nav_port + 3603
DEBUG:hydroffice.ssp.settings:config.ini: valid pair: -> mvp_system_port + 3604
DEBUG hydroffice.ssp.settings.load_config:139 > config.ini: valid pair: -> mvp_system_port + 3604
DEBUG:hydroffice.ssp.settings:config.ini: valid pair: -> mvp_sw_version + 2.47
DEBUG hydroffice.ssp.settings.load_config:139 > config.ini: valid pair: -> mvp_sw_version + 2.47
DEBUG:hydroffice.ssp.settings:config.ini: valid pair: -> mvp_instrument_id + M
DEBUG hydroffice.ssp.settings.load_config:139 > config.ini: valid pair: -> mvp_instrument_id + M
DEBUG:hydroffice.ssp.settings:config.ini: skipping comment line:
# MVP: sensor type, the following are supported
DEBUG hydroffice.ssp.settings.load_config:128 > config.ini: skipping comment line:
# MVP: sensor type, the following are supported
DEBUG:hydroffice.ssp.settings:config.ini: skipping comment line:
# -> AML_uSVP
DEBUG hydroffice.ssp.settings.load_config:128 > config.ini: skipping comment line:
# -> AML_uSVP
DEBUG:hydroffice.ssp.settings:config.ini: skipping comment line:
# -> AML_uSVPT
DEBUG hydroffice.ssp.settings.load_config:128 > config.ini: skipping comment line:
# -> AML_uSVPT
DEBUG:hydroffice.ssp.settings:config.ini: skipping comment line:
# -> AML_Smart_SVP
DEBUG hydroffice.ssp.settings.load_config:128 > config.ini: skipping comment line:
# -> AML_Smart_SVP
DEBUG:hydroffice.ssp.settings:config.ini: skipping comment line:
# -> AML_uCTD
DEBUG hydroffice.ssp.settings.load_config:128 > config.ini: skipping comment line:
# -> AML_uCTD
DEBUG:hydroffice.ssp.settings:config.ini: skipping comment line:
# -> AML_uCTD+
DEBUG hydroffice.ssp.settings.load_config:128 > config.ini: skipping comment line:
# -> AML_uCTD+
DEBUG:hydroffice.ssp.settings:config.ini: skipping comment line:
# -> Valeport_SVPT
DEBUG hydroffice.ssp.settings.load_config:128 > config.ini: skipping comment line:
# -> Valeport_SVPT
DEBUG:hydroffice.ssp.settings:config.ini: skipping comment line:
# -> SBE_911+
DEBUG hydroffice.ssp.settings.load_config:128 > config.ini: skipping comment line:
# -> SBE_911+
DEBUG:hydroffice.ssp.settings:config.ini: skipping comment line:
# -> SBE_49
DEBUG hydroffice.ssp.settings.load_config:128 > config.ini: skipping comment line:
# -> SBE_49
DEBUG:hydroffice.ssp.settings:config.ini: valid pair: -> mvp_instrument + AML_uSVPT
DEBUG hydroffice.ssp.settings.load_config:139 > config.ini: valid pair: -> mvp_instrument + AML_uSVPT
In [ ]:
Content source: hydroffice/hyo_ssp
Similar notebooks: