Linear Elasticity in 2D for 3 Phases


This example provides a demonstration of using PyMKS to compute the linear strain field for a three-phase composite material. It demonstrates how to generate data for delta microstructures and then use this data to calibrate the first order MKS influence coefficients. The calibrated influence coefficients are used to predict the strain response for a random microstructure and the results are compared with those from finite element. Finally, the influence coefficients are scaled up and the MKS results are again compared with the finite element data for a large problem.

PyMKS uses the finite element tool SfePy to generate both the strain fields to fit the MKS model and the verification data to evaluate the MKS model's accuracy.

Elastostatics Equations and Boundary Conditions

The governing equations for elasticostaics and the boundary conditions used in this example are the same as those provided in the Linear Elastic in 2D example.

Note that an inappropriate boundary condition is used in this example because current version of SfePy is unable to implement a periodic plus displacement boundary condition. This leads to some issues near the edges of the domain and introduces errors into the resizing of the coefficients. We are working to fix this issue, but note that the problem is not with the MKS regression itself, but with the calibration data used. The finite element package ABAQUS includes the displaced periodic boundary condition and can be used to calibrate the MKS regression correctly.

Modeling with MKS

Calibration Data and Delta Microstructures

The first order MKS influence coefficients are all that is needed to compute a strain field of a random microstructure as long as the ratio between the elastic moduli (also known as the contrast) is less than 1.5. If this condition is met we can expect a mean absolute error of 2% or less when comparing the MKS results with those computed using finite element methods [1].

Because we are using distinct phases and the contrast is low enough to only need the first-order coefficients, delta microstructures and their strain fields are all that we need to calibrate the first-order influence coefficients [2].

Here we use the make_delta_microstructure function from pymks.datasets to create the delta microstructures needed to calibrate the first-order influence coefficients for a two-phase microstructure. The make_delta_microstructure function uses SfePy to generate the data.

In [1]:
import pymks

%matplotlib inline
%load_ext autoreload
%autoreload 2

import numpy as np
import matplotlib.pyplot as plt

In [2]:
from import draw_microstructures
from pymks.datasets import make_delta_microstructures

n = 21
n_phases = 3
X_delta = make_delta_microstructures(n_phases=n_phases, size=(n, n))

Let's take a look at a few of the delta microstructures by importing draw_microstructures from

In [3]:

Using delta microstructures for the calibration of the first-order influence coefficients is essentially the same, as using a unit impulse response to find the kernel of a system in signal processing. Any given delta microstructure is composed of only two phases with the center cell having an alternative phase from the remainder of the domain. The number of delta microstructures that are needed to calibrated the first-order coefficients is $N(N-1)$ where $N$ is the number of phases, therefore in this example we need 6 delta microstructures.

Generating Calibration Data

The make_elasticFEstrain_delta function from pymks.datasets provides an easy interface to generate delta microstructures and their strain fields, which can then be used for calibration of the influence coefficients. The function calls the ElasticFESimulation class to compute the strain fields.

In this example, lets look at a three phase microstructure with elastic moduli values of 80, 100 and 120 and Poisson's ratio values all equal to 0.3. Let's also set the macroscopic imposed strain equal to 0.02. All of these parameters used in the simulation must be passed into the make_elasticFEstrain_delta function. The number of Poisson's ratio values and elastic moduli values indicates the number of phases. Note that make_elasticFEstrain_delta does not take a number of samples argument as the number of samples to calibrate the MKS is fixed by the number of phases.

In [4]:
from pymks.datasets import make_elastic_FE_strain_delta
from import draw_microstructure_strain

elastic_modulus = (80, 100, 120)
poissons_ratio = (0.3, 0.3, 0.3)
macro_strain = 0.02
size = (n, n)

X_delta, strains_delta = make_elastic_FE_strain_delta(elastic_modulus=elastic_modulus,
                                                      size=size, macro_strain=macro_strain)

Let's take a look at one of the delta microstructures and the $\varepsilon_{xx}$ strain field.

In [5]:
draw_microstructure_strain(X_delta[0], strains_delta[0])

Because slice(None) (the default slice operator in Python, equivalent to array[:]) was passed in to the make_elasticFEstrain_delta function as the argument for strain_index, the function returns all the strain fields. Let's also take a look at the $\varepsilon_{yy}$ and $\varepsilon_{xy}$ strain fields.

Calibrating First-Order Influence Coefficients

Now that we have the delta microstructures and their strain fields, we will calibrate the influence coefficients by creating an instance of the MKSLocalizatoinModel class. Because we are going to calibrate the influence coefficients with delta microstructures, we can create an instance of PrimitiveBasis with n_states equal to 3, and use it to create an instance of MKSLocalizationModel. The delta microstructures and their strain fields will then be passed to the fit method.

In [6]:
from pymks import MKSLocalizationModel
from pymks import PrimitiveBasis

p_basis =PrimitiveBasis(n_states=3, domain=[0, 2])
model = MKSLocalizationModel(basis=p_basis)

Now, pass the delta microstructures and their strain fields into the fit method to calibrate the first-order influence coefficients.

In [7]:, strains_delta)

That's it, the influence coefficient have been calibrated. Let's take a look at them.

In [8]:
from import draw_coeff


The influence coefficients for $l=0$ and $l = 1$ have a Gaussian-like shape, while the influence coefficients for $l=2$ are constant-valued. The constant-valued influence coefficients may seem superfluous, but are equally as important. They are equivalent to the constant term in multiple linear regression with categorical variables.

Predict of the Strain Field for a Random Microstructure

Let's now use our instance of the MKSLocalizationModel class with calibrated influence coefficients to compute the strain field for a random two-phase microstructure and compare it with the results from a finite element simulation.

The make_elasticFEstrain_random function from pymks.datasets is an easy way to generate a random microstructure and its strain field results from finite element analysis.

In [9]:
from pymks.datasets import make_elastic_FE_strain_random

X, strain = make_elastic_FE_strain_random(n_samples=1, elastic_modulus=elastic_modulus,
                                          poissons_ratio=poissons_ratio, size=size, 
draw_microstructure_strain(X[0] , strain[0])

Note that the calibrated influence coefficients can only be used to reproduce the simulation with the same boundary conditions that they were calibrated with.

Now, to get the strain field from the MKSLocalizationModel, just pass the same microstructure to the predict method.

In [10]:
strain_pred = model.predict(X)

Finally let's compare the results from finite element simulation and the MKS model.

In [11]:
from import draw_strains_compare

draw_strains_compare(strain[0], strain_pred[0])

Let's plot the difference between the two strain fields.

In [12]:
from import draw_differences

draw_differences([strain[0] - strain_pred[0]], ['Finite Element - MKS'])

The MKS model is able to capture the strain field for the random microstructure after being calibrated with delta microstructures.

Resizing the Coefficeints to use on Larger Microstructures

The influence coefficients that were calibrated on a smaller microstructure can be used to predict the strain field on a larger microstructure though spectral interpolation [3], but accuracy of the MKS model drops slightly. To demonstrate how this is done, let's generate a new larger random microstructure and its strain field.

In [13]:
m = 3 * n 
size = (m, m)
print size
X, strain = make_elastic_FE_strain_random(n_samples=1, elastic_modulus=elastic_modulus,
                                          poissons_ratio=poissons_ratio, size=size, 
draw_microstructure_strain(X[0] , strain[0])

(63, 63)

The influence coefficients that have already been calibrated on a $n$ by $n$ delta microstructures, need to be resized to match the shape of the new larger $m$ by $m$ microstructure that we want to compute the strain field for. This can be done by passing the shape of the new larger microstructure into the resize_coeff method.

In [14]:

Let's now take a look that ther resized influence coefficients.

In [15]:

Because the coefficients have been resized, they will no longer work for our original $n$ by $n$ sized microstructures they were calibrated on, but they can now be used on the $m$ by $m$ microstructures. Just like before, just pass the microstructure as the argument of the predict method to get the strain field.

In [16]:
strain_pred = model.predict(X)

draw_strains_compare(strain[0], strain_pred[0])

Again, let's plot the difference between the two strain fields.

In [17]:
draw_differences([strain[0] - strain_pred[0]], ['Finite Element - MKS'])

As you can see, the results from the strain field computed with the resized influence coefficients is not as accurate as they were before they were resized. This decrease in accuracy is expected when using spectral interpolation [4].


[1] Binci M., Fullwood D., Kalidindi S.R., A new spectral framework for establishing localization relationships for elastic behavior of composites and their calibration to finite-element models. Acta Materialia, 2008. 56 (10) p. 2272-2282 doi:10.1016/j.actamat.2008.01.017.

[2] Landi, G., S.R. Niezgoda, S.R. Kalidindi, Multi-scale modeling of elastic response of three-dimensional voxel-based microstructure datasets using novel DFT-based knowledge systems. Acta Materialia, 2009. 58 (7): p. 2716-2725 doi:10.1016/j.actamat.2010.01.007.

[3] Marko, K., Kalidindi S.R., Fullwood D., Computationally efficient database and spectral interpolation for fully plastic Taylor-type crystal plasticity calculations of face-centered cubic polycrystals. International Journal of Plasticity 24 (2008) 1264–1276 doi:10.1016/j.ijplas.2007.12.002.

[4] Marko, K. Al-Harbi H. F. , Kalidindi S.R., Crystal plasticity simulations using discrete Fourier transforms. Acta Materialia 57 (2009) 1777–1784 doi:10.1016/j.actamat.2008.12.017.

In [ ]: