In [1]:
machine = dict(
name="PM-4-130",
lfe=0.1,
poles=4,
outer_diam=0.13,
bore_diam=0.07,
inner_diam=0.015,
airgap=0.0015,
stator=dict(
num_slots=12,
rlength=1.0,
statorRotor3=dict(
slot_height=0.02,
slot_h1=0.002,
slot_h2=0.004,
slot_r1=0.0,
slot_r2=0.0,
wedge_width1=0.0,
wedge_width2=0.0,
middle_line=0,
tooth_width=0.009,
slot_top_sh=0,
slot_width=0.003)
),
magnet=dict(
magnetSector=dict(
magn_num=1,
magn_width_pct=0.6,
magn_height=0.005,
magn_shape=0.02,
bridge_height=0,
magn_type=2,
condshaft_r=0.02,
magn_ori=1,
magn_rfe=0.0,
bridge_width=0,
magn_len=1)
),
windings=dict(
num_phases=3,
num_wires=20,
coil_span=3.0,
num_layers=1)
)
Use a pm_sym_fast calculation at a rotor speed of 5000 1/min:
In [2]:
operatingConditions = dict(
speed=5000.0 / 60,
calculationMode="pm_sym_fast",
num_move_steps=49,
magn_temp=20.0,
wind_temp=60,
current=28.284,
angl_i_up=0.0)
Define the variation parameters with their ranges and number of steps:
In [3]:
decision_vars = [
{"steps": 5, "bounds": [3e-3, 8e-3],
"name": "stator.statorRotor3.slot_width",
"label": "Slot Width/m"},
{"steps": 5, "bounds": [0.72, 0.85],
"name": "magnet.magnetSector.magn_width_pct",
"label": "Rel. Magnet Width"},
{"steps": 5, "bounds": [0.024, 0.0335],
"name": "magnet.magnetSector.magn_shape",
"label": "Magnet Shape/m"}
]
Define the objective parameters:
In [4]:
objective_vars = [
{"name": "dqPar.torque[-1]",
"label": "Load Torque/Nm"},
{"name": "torque[0].ripple",
"label": "Cogging Torque/Nm"},
{"name": "torque[-1].ripple",
"label": "Torque Ripple/Nm"}
]
Combine the objective and variation parameters and set the population size which is in this case the upper limit of the bucket size (ie. the number of parallel calculations):
In [5]:
parvardef = {
"objective_vars": objective_vars,
"population_size": 20,
"decision_vars": decision_vars
}
Use logging to get a feedback during the calculation:
In [6]:
import logging
logging.basicConfig(level=logging.INFO,
format='%(asctime)s %(message)s')
Setup up an engine the drives the calculation. Here we chose a multi-core calculation:
In [7]:
from femagtools.multiproc import Engine
engine = Engine()
Define the working directory:
In [8]:
import os
userdir = os.path.expanduser('~')
workdir = os.path.join(userdir, 'parvar2')
try:
os.makedirs(workdir)
except OSError:
pass
Start the parameter variation with the total 125 FE calculations (duration on a Linux i7 laptop with 4 cores: 30min):
In [9]:
import femagtools.grid
parvar = femagtools.grid.Grid(workdir)
results = parvar(parvardef, machine, operatingConditions, engine)
2018-11-10 14:38:18,837 STEPS [5, 5, 5]
2018-11-10 14:38:18,839 Decision Vars: ['stator.statorRotor3.slot_width', 'magnet.magnetSector.magn_width_pct', 'magnet.magnetSector.magn_shape']
2018-11-10 14:38:18,841 bounds lower: (0.003, 0.72, 0.024) upper: (0.008, 0.85, 0.0335)
2018-11-10 14:38:18,843 ........ 1 / 7
2018-11-10 14:38:18,844 Prepare: stator.statorRotor3.slot_width = 0.003
2018-11-10 14:38:18,845 Prepare: magnet.magnetSector.magn_width_pct = 0.72
2018-11-10 14:38:18,847 Prepare: magnet.magnetSector.magn_shape = 0.024
2018-11-10 14:38:18,848 prepare [0.003 0.72 0.024]
2018-11-10 14:38:18,865 use template new_model.mako
2018-11-10 14:38:18,892 use template cu_losses.mako
2018-11-10 14:38:18,906 use template statorRotor3.mako
2018-11-10 14:38:18,913 use template gen_winding.mako
2018-11-10 14:38:18,925 use template magnetSector.mako
2018-11-10 14:38:18,926 use template cu_losses.mako
2018-11-10 14:38:18,936 use template pm_sym_fast.mako
2018-11-10 14:38:18,947 use template plots.mako
2018-11-10 14:38:18,953 Prepare: stator.statorRotor3.slot_width = 0.00425
2018-11-10 14:38:18,953 Prepare: magnet.magnetSector.magn_width_pct = 0.72
2018-11-10 14:38:18,956 Prepare: magnet.magnetSector.magn_shape = 0.024
2018-11-10 14:38:18,957 prepare [0.00425 0.72 0.024 ]
2018-11-10 14:38:18,959 use template new_model.mako
2018-11-10 14:38:18,962 use template cu_losses.mako
2018-11-10 14:38:18,964 use template statorRotor3.mako
2018-11-10 14:38:18,968 use template gen_winding.mako
2018-11-10 14:38:18,969 use template magnetSector.mako
2018-11-10 14:38:18,971 use template cu_losses.mako
2018-11-10 14:38:18,972 use template pm_sym_fast.mako
2018-11-10 14:38:18,973 use template plots.mako
2018-11-10 14:38:18,977 Prepare: stator.statorRotor3.slot_width = 0.0055
2018-11-10 14:38:18,978 Prepare: magnet.magnetSector.magn_width_pct = 0.72
2018-11-10 14:38:18,979 Prepare: magnet.magnetSector.magn_shape = 0.024
2018-11-10 14:38:18,981 prepare [0.0055 0.72 0.024 ]
2018-11-10 14:38:18,983 use template new_model.mako
2018-11-10 14:38:18,988 use template cu_losses.mako
2018-11-10 14:38:18,989 use template statorRotor3.mako
2018-11-10 14:38:18,990 use template gen_winding.mako
2018-11-10 14:38:18,992 use template magnetSector.mako
2018-11-10 14:38:18,993 use template cu_losses.mako
2018-11-10 14:38:18,995 use template pm_sym_fast.mako
2018-11-10 14:38:18,997 use template plots.mako
2018-11-10 14:38:19,002 Prepare: stator.statorRotor3.slot_width = 0.00675
2018-11-10 14:38:19,004 Prepare: magnet.magnetSector.magn_width_pct = 0.72
2018-11-10 14:38:19,005 Prepare: magnet.magnetSector.magn_shape = 0.024
2018-11-10 14:38:19,006 prepare [0.00675 0.72 0.024 ]
2018-11-10 14:38:19,008 use template new_model.mako
2018-11-10 14:38:19,017 use template cu_losses.mako
2018-11-10 14:38:19,018 use template statorRotor3.mako
2018-11-10 14:38:19,020 use template gen_winding.mako
2018-11-10 14:38:19,021 use template magnetSector.mako
2018-11-10 14:38:19,022 use template cu_losses.mako
2018-11-10 14:38:19,024 use template pm_sym_fast.mako
2018-11-10 14:38:19,025 use template plots.mako
2018-11-10 14:38:19,030 Prepare: stator.statorRotor3.slot_width = 0.008
2018-11-10 14:38:19,031 Prepare: magnet.magnetSector.magn_width_pct = 0.72
2018-11-10 14:38:19,034 Prepare: magnet.magnetSector.magn_shape = 0.024
2018-11-10 14:38:19,038 prepare [0.008 0.72 0.024]
2018-11-10 14:38:19,039 use template new_model.mako
2018-11-10 14:38:19,041 use template cu_losses.mako
2018-11-10 14:38:19,042 use template statorRotor3.mako
2018-11-10 14:38:19,043 use template gen_winding.mako
2018-11-10 14:38:19,048 use template magnetSector.mako
2018-11-10 14:38:19,050 use template cu_losses.mako
2018-11-10 14:38:19,054 use template pm_sym_fast.mako
2018-11-10 14:38:19,055 use template plots.mako
2018-11-10 14:38:19,059 Prepare: stator.statorRotor3.slot_width = 0.003
2018-11-10 14:38:19,060 Prepare: magnet.magnetSector.magn_width_pct = 0.7525
2018-11-10 14:38:19,062 Prepare: magnet.magnetSector.magn_shape = 0.024
2018-11-10 14:38:19,063 prepare [0.003 0.7525 0.024 ]
2018-11-10 14:38:19,065 use template new_model.mako
2018-11-10 14:38:19,071 use template cu_losses.mako
2018-11-10 14:38:19,072 use template statorRotor3.mako
2018-11-10 14:38:19,074 use template gen_winding.mako
2018-11-10 14:38:19,075 use template magnetSector.mako
2018-11-10 14:38:19,080 use template cu_losses.mako
2018-11-10 14:38:19,082 use template pm_sym_fast.mako
2018-11-10 14:38:19,085 use template plots.mako
2018-11-10 14:38:19,090 Prepare: stator.statorRotor3.slot_width = 0.00425
2018-11-10 14:38:19,092 Prepare: magnet.magnetSector.magn_width_pct = 0.7525
2018-11-10 14:38:19,093 Prepare: magnet.magnetSector.magn_shape = 0.024
2018-11-10 14:38:19,094 prepare [0.00425 0.7525 0.024 ]
2018-11-10 14:38:19,096 use template new_model.mako
2018-11-10 14:38:19,098 use template cu_losses.mako
2018-11-10 14:38:19,099 use template statorRotor3.mako
2018-11-10 14:38:19,101 use template gen_winding.mako
2018-11-10 14:38:19,103 use template magnetSector.mako
2018-11-10 14:38:19,104 use template cu_losses.mako
2018-11-10 14:38:19,106 use template pm_sym_fast.mako
2018-11-10 14:38:19,107 use template plots.mako
2018-11-10 14:38:19,113 Prepare: stator.statorRotor3.slot_width = 0.0055
2018-11-10 14:38:19,115 Prepare: magnet.magnetSector.magn_width_pct = 0.7525
2018-11-10 14:38:19,116 Prepare: magnet.magnetSector.magn_shape = 0.024
2018-11-10 14:38:19,118 prepare [0.0055 0.7525 0.024 ]
2018-11-10 14:38:19,120 use template new_model.mako
2018-11-10 14:38:19,122 use template cu_losses.mako
2018-11-10 14:38:19,123 use template statorRotor3.mako
2018-11-10 14:38:19,125 use template gen_winding.mako
2018-11-10 14:38:19,129 use template magnetSector.mako
2018-11-10 14:38:19,132 use template cu_losses.mako
2018-11-10 14:38:19,133 use template pm_sym_fast.mako
2018-11-10 14:38:19,135 use template plots.mako
2018-11-10 14:38:19,140 Prepare: stator.statorRotor3.slot_width = 0.00675
2018-11-10 14:38:19,141 Prepare: magnet.magnetSector.magn_width_pct = 0.7525
2018-11-10 14:38:19,141 Prepare: magnet.magnetSector.magn_shape = 0.024
2018-11-10 14:38:19,142 prepare [0.00675 0.7525 0.024 ]
2018-11-10 14:38:19,144 use template new_model.mako
2018-11-10 14:38:19,148 use template cu_losses.mako
2018-11-10 14:38:19,149 use template statorRotor3.mako
2018-11-10 14:38:19,150 use template gen_winding.mako
2018-11-10 14:38:19,152 use template magnetSector.mako
2018-11-10 14:38:19,156 use template cu_losses.mako
2018-11-10 14:38:19,158 use template pm_sym_fast.mako
2018-11-10 14:38:19,160 use template plots.mako
2018-11-10 14:38:19,166 Prepare: stator.statorRotor3.slot_width = 0.008
2018-11-10 14:38:19,167 Prepare: magnet.magnetSector.magn_width_pct = 0.7525
2018-11-10 14:38:19,169 Prepare: magnet.magnetSector.magn_shape = 0.024
2018-11-10 14:38:19,171 prepare [0.008 0.7525 0.024 ]
2018-11-10 14:38:19,174 use template new_model.mako
2018-11-10 14:38:19,177 use template cu_losses.mako
2018-11-10 14:38:19,178 use template statorRotor3.mako
2018-11-10 14:38:19,180 use template gen_winding.mako
2018-11-10 14:38:19,181 use template magnetSector.mako
2018-11-10 14:38:19,183 use template cu_losses.mako
2018-11-10 14:38:19,184 use template pm_sym_fast.mako
2018-11-10 14:38:19,186 use template plots.mako
2018-11-10 14:38:19,194 Prepare: stator.statorRotor3.slot_width = 0.003
2018-11-10 14:38:19,195 Prepare: magnet.magnetSector.magn_width_pct = 0.7849999999999999
2018-11-10 14:38:19,195 Prepare: magnet.magnetSector.magn_shape = 0.024
2018-11-10 14:38:19,196 prepare [0.003 0.785 0.024]
2018-11-10 14:38:19,198 use template new_model.mako
2018-11-10 14:38:19,200 use template cu_losses.mako
2018-11-10 14:38:19,202 use template statorRotor3.mako
2018-11-10 14:38:19,204 use template gen_winding.mako
2018-11-10 14:38:19,205 use template magnetSector.mako
2018-11-10 14:38:19,206 use template cu_losses.mako
2018-11-10 14:38:19,207 use template pm_sym_fast.mako
2018-11-10 14:38:19,209 use template plots.mako
2018-11-10 14:38:19,212 Prepare: stator.statorRotor3.slot_width = 0.00425
2018-11-10 14:38:19,213 Prepare: magnet.magnetSector.magn_width_pct = 0.7849999999999999
2018-11-10 14:38:19,214 Prepare: magnet.magnetSector.magn_shape = 0.024
2018-11-10 14:38:19,215 prepare [0.00425 0.785 0.024 ]
2018-11-10 14:38:19,217 use template new_model.mako
2018-11-10 14:38:19,220 use template cu_losses.mako
2018-11-10 14:38:19,222 use template statorRotor3.mako
2018-11-10 14:38:19,224 use template gen_winding.mako
2018-11-10 14:38:19,225 use template magnetSector.mako
2018-11-10 14:38:19,230 use template cu_losses.mako
2018-11-10 14:38:19,232 use template pm_sym_fast.mako
2018-11-10 14:38:19,234 use template plots.mako
2018-11-10 14:38:19,238 Prepare: stator.statorRotor3.slot_width = 0.0055
2018-11-10 14:38:19,239 Prepare: magnet.magnetSector.magn_width_pct = 0.7849999999999999
2018-11-10 14:38:19,240 Prepare: magnet.magnetSector.magn_shape = 0.024
2018-11-10 14:38:19,241 prepare [0.0055 0.785 0.024 ]
2018-11-10 14:38:19,243 use template new_model.mako
2018-11-10 14:38:19,245 use template cu_losses.mako
2018-11-10 14:38:19,246 use template statorRotor3.mako
2018-11-10 14:38:19,248 use template gen_winding.mako
2018-11-10 14:38:19,250 use template magnetSector.mako
2018-11-10 14:38:19,256 use template cu_losses.mako
2018-11-10 14:38:19,257 use template pm_sym_fast.mako
2018-11-10 14:38:19,258 use template plots.mako
2018-11-10 14:38:19,263 Prepare: stator.statorRotor3.slot_width = 0.00675
2018-11-10 14:38:19,264 Prepare: magnet.magnetSector.magn_width_pct = 0.7849999999999999
2018-11-10 14:38:19,265 Prepare: magnet.magnetSector.magn_shape = 0.024
2018-11-10 14:38:19,268 prepare [0.00675 0.785 0.024 ]
2018-11-10 14:38:19,269 use template new_model.mako
2018-11-10 14:38:19,272 use template cu_losses.mako
2018-11-10 14:38:19,274 use template statorRotor3.mako
2018-11-10 14:38:19,275 use template gen_winding.mako
2018-11-10 14:38:19,277 use template magnetSector.mako
2018-11-10 14:38:19,279 use template cu_losses.mako
2018-11-10 14:38:19,280 use template pm_sym_fast.mako
2018-11-10 14:38:19,282 use template plots.mako
2018-11-10 14:38:19,289 Prepare: stator.statorRotor3.slot_width = 0.008
2018-11-10 14:38:19,290 Prepare: magnet.magnetSector.magn_width_pct = 0.7849999999999999
2018-11-10 14:38:19,291 Prepare: magnet.magnetSector.magn_shape = 0.024
2018-11-10 14:38:19,293 prepare [0.008 0.785 0.024]
2018-11-10 14:38:19,295 use template new_model.mako
2018-11-10 14:38:19,297 use template cu_losses.mako
2018-11-10 14:38:19,299 use template statorRotor3.mako
2018-11-10 14:38:19,301 use template gen_winding.mako
2018-11-10 14:38:19,304 use template magnetSector.mako
2018-11-10 14:38:19,305 use template cu_losses.mako
2018-11-10 14:38:19,306 use template pm_sym_fast.mako
2018-11-10 14:38:19,312 use template plots.mako
2018-11-10 14:38:19,315 Prepare: stator.statorRotor3.slot_width = 0.003
2018-11-10 14:38:19,316 Prepare: magnet.magnetSector.magn_width_pct = 0.8175
2018-11-10 14:38:19,318 Prepare: magnet.magnetSector.magn_shape = 0.024
2018-11-10 14:38:19,319 prepare [0.003 0.8175 0.024 ]
2018-11-10 14:38:19,321 use template new_model.mako
2018-11-10 14:38:19,324 use template cu_losses.mako
2018-11-10 14:38:19,328 use template statorRotor3.mako
2018-11-10 14:38:19,330 use template gen_winding.mako
2018-11-10 14:38:19,332 use template magnetSector.mako
2018-11-10 14:38:19,333 use template cu_losses.mako
2018-11-10 14:38:19,335 use template pm_sym_fast.mako
2018-11-10 14:38:19,337 use template plots.mako
2018-11-10 14:38:19,341 Prepare: stator.statorRotor3.slot_width = 0.00425
2018-11-10 14:38:19,348 Prepare: magnet.magnetSector.magn_width_pct = 0.8175
2018-11-10 14:38:19,349 Prepare: magnet.magnetSector.magn_shape = 0.024
2018-11-10 14:38:19,349 prepare [0.00425 0.8175 0.024 ]
2018-11-10 14:38:19,351 use template new_model.mako
2018-11-10 14:38:19,353 use template cu_losses.mako
2018-11-10 14:38:19,354 use template statorRotor3.mako
2018-11-10 14:38:19,355 use template gen_winding.mako
2018-11-10 14:38:19,356 use template magnetSector.mako
2018-11-10 14:38:19,358 use template cu_losses.mako
2018-11-10 14:38:19,366 use template pm_sym_fast.mako
2018-11-10 14:38:19,367 use template plots.mako
2018-11-10 14:38:19,407 Started 17
2018-11-10 14:38:19,409 FEMAG /home/tar/parvar2/0: femag.fsl
2018-11-10 14:38:19,409 FEMAG /home/tar/parvar2/2: femag.fsl
2018-11-10 14:38:19,409 FEMAG /home/tar/parvar2/1: femag.fsl
2018-11-10 14:38:19,412 FEMAG /home/tar/parvar2/3: femag.fsl
2018-11-10 14:38:51,532 Finished pid: 16101 return 0
2018-11-10 14:38:51,535 FEMAG /home/tar/parvar2/4: femag.fsl
2018-11-10 14:38:51,660 Finished pid: 16100 return 0
2018-11-10 14:38:51,665 FEMAG /home/tar/parvar2/5: femag.fsl
2018-11-10 14:38:53,088 Finished pid: 16099 return 0
2018-11-10 14:38:53,090 FEMAG /home/tar/parvar2/6: femag.fsl
2018-11-10 14:38:53,370 Finished pid: 16102 return 0
2018-11-10 14:38:53,372 FEMAG /home/tar/parvar2/7: femag.fsl
2018-11-10 14:39:23,018 Finished pid: 16127 return 0
2018-11-10 14:39:23,020 FEMAG /home/tar/parvar2/8: femag.fsl
2018-11-10 14:39:24,727 Finished pid: 16137 return 0
2018-11-10 14:39:24,733 FEMAG /home/tar/parvar2/9: femag.fsl
2018-11-10 14:39:24,860 Finished pid: 16121 return 0
2018-11-10 14:39:24,863 FEMAG /home/tar/parvar2/10: femag.fsl
2018-11-10 14:39:25,039 Finished pid: 16132 return 0
2018-11-10 14:39:25,040 FEMAG /home/tar/parvar2/11: femag.fsl
2018-11-10 14:39:54,717 Finished pid: 16149 return 0
2018-11-10 14:39:54,719 FEMAG /home/tar/parvar2/12: femag.fsl
2018-11-10 14:39:56,206 Finished pid: 16159 return 0
2018-11-10 14:39:56,212 FEMAG /home/tar/parvar2/13: femag.fsl
2018-11-10 14:39:56,296 Finished pid: 16164 return 0
2018-11-10 14:39:56,298 FEMAG /home/tar/parvar2/14: femag.fsl
2018-11-10 14:39:56,834 Finished pid: 16154 return 0
2018-11-10 14:39:56,835 FEMAG /home/tar/parvar2/15: femag.fsl
2018-11-10 14:40:25,727 Finished pid: 16181 return 0
2018-11-10 14:40:25,733 FEMAG /home/tar/parvar2/16: femag.fsl
2018-11-10 14:40:27,952 Finished pid: 16187 return 0
2018-11-10 14:40:28,086 Finished pid: 16192 return 0
2018-11-10 14:40:29,285 Finished pid: 16197 return 0
2018-11-10 14:40:45,132 Finished pid: 16209 return 0
2018-11-10 14:40:45,134 Reading /home/tar/parvar2/0/PM-4-130_001.BATCH
2018-11-10 14:40:45,151 Reading /home/tar/parvar2/1/PM-4-130_001.BATCH
2018-11-10 14:40:45,159 Reading /home/tar/parvar2/2/PM-4-130_001.BATCH
2018-11-10 14:40:45,168 Reading /home/tar/parvar2/3/PM-4-130_001.BATCH
2018-11-10 14:40:45,175 Reading /home/tar/parvar2/4/PM-4-130_001.BATCH
2018-11-10 14:40:45,183 Reading /home/tar/parvar2/5/PM-4-130_001.BATCH
2018-11-10 14:40:45,190 Reading /home/tar/parvar2/6/PM-4-130_001.BATCH
2018-11-10 14:40:45,196 Reading /home/tar/parvar2/7/PM-4-130_001.BATCH
2018-11-10 14:40:45,203 Reading /home/tar/parvar2/8/PM-4-130_001.BATCH
2018-11-10 14:40:45,210 Reading /home/tar/parvar2/9/PM-4-130_001.BATCH
2018-11-10 14:40:45,217 Reading /home/tar/parvar2/10/PM-4-130_001.BATCH
2018-11-10 14:40:45,224 Reading /home/tar/parvar2/11/PM-4-130_001.BATCH
2018-11-10 14:40:45,231 Reading /home/tar/parvar2/12/PM-4-130_001.BATCH
2018-11-10 14:40:45,240 Reading /home/tar/parvar2/13/PM-4-130_001.BATCH
2018-11-10 14:40:45,247 Reading /home/tar/parvar2/14/PM-4-130_001.BATCH
2018-11-10 14:40:45,254 Reading /home/tar/parvar2/15/PM-4-130_001.BATCH
2018-11-10 14:40:45,262 Reading /home/tar/parvar2/16/PM-4-130_001.BATCH
2018-11-10 14:40:45,268 ........ 2 / 7
2018-11-10 14:40:45,269 rm /home/tar/parvar2/0
2018-11-10 14:40:45,275 rm /home/tar/parvar2/1
2018-11-10 14:40:45,280 rm /home/tar/parvar2/2
2018-11-10 14:40:45,285 rm /home/tar/parvar2/3
2018-11-10 14:40:45,290 rm /home/tar/parvar2/4
2018-11-10 14:40:45,295 rm /home/tar/parvar2/5
2018-11-10 14:40:45,300 rm /home/tar/parvar2/6
2018-11-10 14:40:45,305 rm /home/tar/parvar2/7
2018-11-10 14:40:45,310 rm /home/tar/parvar2/8
2018-11-10 14:40:45,315 rm /home/tar/parvar2/9
2018-11-10 14:40:45,320 rm /home/tar/parvar2/10
2018-11-10 14:40:45,325 rm /home/tar/parvar2/11
2018-11-10 14:40:45,331 rm /home/tar/parvar2/12
2018-11-10 14:40:45,337 rm /home/tar/parvar2/13
2018-11-10 14:40:45,343 rm /home/tar/parvar2/14
2018-11-10 14:40:45,349 rm /home/tar/parvar2/15
2018-11-10 14:40:45,355 rm /home/tar/parvar2/16
2018-11-10 14:40:45,362 Prepare: stator.statorRotor3.slot_width = 0.0055
2018-11-10 14:40:45,362 Prepare: magnet.magnetSector.magn_width_pct = 0.8175
2018-11-10 14:40:45,363 Prepare: magnet.magnetSector.magn_shape = 0.024
2018-11-10 14:40:45,363 prepare [0.0055 0.8175 0.024 ]
2018-11-10 14:40:45,366 use template new_model.mako
2018-11-10 14:40:45,367 use template cu_losses.mako
2018-11-10 14:40:45,368 use template statorRotor3.mako
2018-11-10 14:40:45,368 use template gen_winding.mako
2018-11-10 14:40:45,370 use template magnetSector.mako
2018-11-10 14:40:45,371 use template cu_losses.mako
2018-11-10 14:40:45,372 use template pm_sym_fast.mako
2018-11-10 14:40:45,372 use template plots.mako
2018-11-10 14:40:45,375 Prepare: stator.statorRotor3.slot_width = 0.00675
2018-11-10 14:40:45,376 Prepare: magnet.magnetSector.magn_width_pct = 0.8175
2018-11-10 14:40:45,377 Prepare: magnet.magnetSector.magn_shape = 0.024
2018-11-10 14:40:45,378 prepare [0.00675 0.8175 0.024 ]
2018-11-10 14:40:45,379 use template new_model.mako
2018-11-10 14:40:45,380 use template cu_losses.mako
2018-11-10 14:40:45,381 use template statorRotor3.mako
2018-11-10 14:40:45,382 use template gen_winding.mako
2018-11-10 14:40:45,383 use template magnetSector.mako
2018-11-10 14:40:45,384 use template cu_losses.mako
2018-11-10 14:40:45,385 use template pm_sym_fast.mako
2018-11-10 14:40:45,386 use template plots.mako
2018-11-10 14:40:45,389 Prepare: stator.statorRotor3.slot_width = 0.008
2018-11-10 14:40:45,390 Prepare: magnet.magnetSector.magn_width_pct = 0.8175
2018-11-10 14:40:45,391 Prepare: magnet.magnetSector.magn_shape = 0.024
2018-11-10 14:40:45,392 prepare [0.008 0.8175 0.024 ]
2018-11-10 14:40:45,393 use template new_model.mako
2018-11-10 14:40:45,395 use template cu_losses.mako
2018-11-10 14:40:45,396 use template statorRotor3.mako
2018-11-10 14:40:45,397 use template gen_winding.mako
2018-11-10 14:40:45,398 use template magnetSector.mako
2018-11-10 14:40:45,399 use template cu_losses.mako
2018-11-10 14:40:45,399 use template pm_sym_fast.mako
2018-11-10 14:40:45,400 use template plots.mako
2018-11-10 14:40:45,403 Prepare: stator.statorRotor3.slot_width = 0.003
2018-11-10 14:40:45,404 Prepare: magnet.magnetSector.magn_width_pct = 0.85
2018-11-10 14:40:45,406 Prepare: magnet.magnetSector.magn_shape = 0.024
2018-11-10 14:40:45,407 prepare [0.003 0.85 0.024]
2018-11-10 14:40:45,408 use template new_model.mako
2018-11-10 14:40:45,410 use template cu_losses.mako
2018-11-10 14:40:45,411 use template statorRotor3.mako
2018-11-10 14:40:45,412 use template gen_winding.mako
2018-11-10 14:40:45,413 use template magnetSector.mako
2018-11-10 14:40:45,414 use template cu_losses.mako
2018-11-10 14:40:45,415 use template pm_sym_fast.mako
2018-11-10 14:40:45,416 use template plots.mako
2018-11-10 14:40:45,420 Prepare: stator.statorRotor3.slot_width = 0.00425
2018-11-10 14:40:45,421 Prepare: magnet.magnetSector.magn_width_pct = 0.85
2018-11-10 14:40:45,422 Prepare: magnet.magnetSector.magn_shape = 0.024
2018-11-10 14:40:45,423 prepare [0.00425 0.85 0.024 ]
2018-11-10 14:40:45,428 use template new_model.mako
2018-11-10 14:40:45,430 use template cu_losses.mako
2018-11-10 14:40:45,433 use template statorRotor3.mako
2018-11-10 14:40:45,434 use template gen_winding.mako
2018-11-10 14:40:45,435 use template magnetSector.mako
2018-11-10 14:40:45,435 use template cu_losses.mako
2018-11-10 14:40:45,436 use template pm_sym_fast.mako
2018-11-10 14:40:45,437 use template plots.mako
2018-11-10 14:40:45,440 Prepare: stator.statorRotor3.slot_width = 0.0055
2018-11-10 14:40:45,440 Prepare: magnet.magnetSector.magn_width_pct = 0.85
2018-11-10 14:40:45,441 Prepare: magnet.magnetSector.magn_shape = 0.024
2018-11-10 14:40:45,442 prepare [0.0055 0.85 0.024 ]
2018-11-10 14:40:45,443 use template new_model.mako
2018-11-10 14:40:45,445 use template cu_losses.mako
2018-11-10 14:40:45,447 use template statorRotor3.mako
2018-11-10 14:40:45,448 use template gen_winding.mako
2018-11-10 14:40:45,449 use template magnetSector.mako
2018-11-10 14:40:45,450 use template cu_losses.mako
2018-11-10 14:40:45,451 use template pm_sym_fast.mako
2018-11-10 14:40:45,452 use template plots.mako
2018-11-10 14:40:45,456 Prepare: stator.statorRotor3.slot_width = 0.00675
2018-11-10 14:40:45,458 Prepare: magnet.magnetSector.magn_width_pct = 0.85
2018-11-10 14:40:45,458 Prepare: magnet.magnetSector.magn_shape = 0.024
2018-11-10 14:40:45,459 prepare [0.00675 0.85 0.024 ]
2018-11-10 14:40:45,460 use template new_model.mako
2018-11-10 14:40:45,462 use template cu_losses.mako
2018-11-10 14:40:45,463 use template statorRotor3.mako
2018-11-10 14:40:45,464 use template gen_winding.mako
2018-11-10 14:40:45,468 use template magnetSector.mako
2018-11-10 14:40:45,470 use template cu_losses.mako
2018-11-10 14:40:45,472 use template pm_sym_fast.mako
2018-11-10 14:40:45,473 use template plots.mako
2018-11-10 14:40:45,476 Prepare: stator.statorRotor3.slot_width = 0.008
2018-11-10 14:40:45,476 Prepare: magnet.magnetSector.magn_width_pct = 0.85
2018-11-10 14:40:45,477 Prepare: magnet.magnetSector.magn_shape = 0.024
2018-11-10 14:40:45,478 prepare [0.008 0.85 0.024]
2018-11-10 14:40:45,480 use template new_model.mako
2018-11-10 14:40:45,481 use template cu_losses.mako
2018-11-10 14:40:45,483 use template statorRotor3.mako
2018-11-10 14:40:45,484 use template gen_winding.mako
2018-11-10 14:40:45,485 use template magnetSector.mako
2018-11-10 14:40:45,486 use template cu_losses.mako
2018-11-10 14:40:45,487 use template pm_sym_fast.mako
2018-11-10 14:40:45,488 use template plots.mako
2018-11-10 14:40:45,491 Prepare: stator.statorRotor3.slot_width = 0.003
2018-11-10 14:40:45,492 Prepare: magnet.magnetSector.magn_width_pct = 0.72
2018-11-10 14:40:45,493 Prepare: magnet.magnetSector.magn_shape = 0.026375000000000003
2018-11-10 14:40:45,493 prepare [0.003 0.72 0.026375]
2018-11-10 14:40:45,494 use template new_model.mako
2018-11-10 14:40:45,495 use template cu_losses.mako
2018-11-10 14:40:45,496 use template statorRotor3.mako
2018-11-10 14:40:45,497 use template gen_winding.mako
2018-11-10 14:40:45,498 use template magnetSector.mako
2018-11-10 14:40:45,505 use template cu_losses.mako
2018-11-10 14:40:45,508 use template pm_sym_fast.mako
2018-11-10 14:40:45,509 use template plots.mako
2018-11-10 14:40:45,511 Prepare: stator.statorRotor3.slot_width = 0.00425
2018-11-10 14:40:45,513 Prepare: magnet.magnetSector.magn_width_pct = 0.72
2018-11-10 14:40:45,514 Prepare: magnet.magnetSector.magn_shape = 0.026375000000000003
2018-11-10 14:40:45,514 prepare [0.00425 0.72 0.026375]
2018-11-10 14:40:45,516 use template new_model.mako
2018-11-10 14:40:45,517 use template cu_losses.mako
2018-11-10 14:40:45,520 use template statorRotor3.mako
2018-11-10 14:40:45,528 use template gen_winding.mako
2018-11-10 14:40:45,529 use template magnetSector.mako
2018-11-10 14:40:45,530 use template cu_losses.mako
2018-11-10 14:40:45,531 use template pm_sym_fast.mako
2018-11-10 14:40:45,532 use template plots.mako
2018-11-10 14:40:45,534 Prepare: stator.statorRotor3.slot_width = 0.0055
2018-11-10 14:40:45,536 Prepare: magnet.magnetSector.magn_width_pct = 0.72
2018-11-10 14:40:45,537 Prepare: magnet.magnetSector.magn_shape = 0.026375000000000003
2018-11-10 14:40:45,537 prepare [0.0055 0.72 0.026375]
2018-11-10 14:40:45,538 use template new_model.mako
2018-11-10 14:40:45,540 use template cu_losses.mako
2018-11-10 14:40:45,540 use template statorRotor3.mako
2018-11-10 14:40:45,542 use template gen_winding.mako
2018-11-10 14:40:45,543 use template magnetSector.mako
2018-11-10 14:40:45,545 use template cu_losses.mako
2018-11-10 14:40:45,546 use template pm_sym_fast.mako
2018-11-10 14:40:45,547 use template plots.mako
2018-11-10 14:40:45,551 Prepare: stator.statorRotor3.slot_width = 0.00675
2018-11-10 14:40:45,553 Prepare: magnet.magnetSector.magn_width_pct = 0.72
2018-11-10 14:40:45,554 Prepare: magnet.magnetSector.magn_shape = 0.026375000000000003
2018-11-10 14:40:45,556 prepare [0.00675 0.72 0.026375]
2018-11-10 14:40:45,558 use template new_model.mako
2018-11-10 14:40:45,562 use template cu_losses.mako
2018-11-10 14:40:45,563 use template statorRotor3.mako
2018-11-10 14:40:45,564 use template gen_winding.mako
2018-11-10 14:40:45,565 use template magnetSector.mako
2018-11-10 14:40:45,566 use template cu_losses.mako
2018-11-10 14:40:45,567 use template pm_sym_fast.mako
2018-11-10 14:40:45,569 use template plots.mako
2018-11-10 14:40:45,573 Prepare: stator.statorRotor3.slot_width = 0.008
2018-11-10 14:40:45,574 Prepare: magnet.magnetSector.magn_width_pct = 0.72
2018-11-10 14:40:45,574 Prepare: magnet.magnetSector.magn_shape = 0.026375000000000003
2018-11-10 14:40:45,575 prepare [0.008 0.72 0.026375]
2018-11-10 14:40:45,577 use template new_model.mako
2018-11-10 14:40:45,578 use template cu_losses.mako
2018-11-10 14:40:45,579 use template statorRotor3.mako
2018-11-10 14:40:45,580 use template gen_winding.mako
2018-11-10 14:40:45,581 use template magnetSector.mako
2018-11-10 14:40:45,581 use template cu_losses.mako
2018-11-10 14:40:45,583 use template pm_sym_fast.mako
2018-11-10 14:40:45,583 use template plots.mako
2018-11-10 14:40:45,591 Prepare: stator.statorRotor3.slot_width = 0.003
2018-11-10 14:40:45,592 Prepare: magnet.magnetSector.magn_width_pct = 0.7525
2018-11-10 14:40:45,593 Prepare: magnet.magnetSector.magn_shape = 0.026375000000000003
2018-11-10 14:40:45,593 prepare [0.003 0.7525 0.026375]
2018-11-10 14:40:45,594 use template new_model.mako
2018-11-10 14:40:45,598 use template cu_losses.mako
2018-11-10 14:40:45,599 use template statorRotor3.mako
2018-11-10 14:40:45,600 use template gen_winding.mako
2018-11-10 14:40:45,602 use template magnetSector.mako
2018-11-10 14:40:45,603 use template cu_losses.mako
2018-11-10 14:40:45,604 use template pm_sym_fast.mako
2018-11-10 14:40:45,606 use template plots.mako
2018-11-10 14:40:45,610 Prepare: stator.statorRotor3.slot_width = 0.00425
2018-11-10 14:40:45,610 Prepare: magnet.magnetSector.magn_width_pct = 0.7525
2018-11-10 14:40:45,612 Prepare: magnet.magnetSector.magn_shape = 0.026375000000000003
2018-11-10 14:40:45,612 prepare [0.00425 0.7525 0.026375]
2018-11-10 14:40:45,614 use template new_model.mako
2018-11-10 14:40:45,615 use template cu_losses.mako
2018-11-10 14:40:45,616 use template statorRotor3.mako
2018-11-10 14:40:45,617 use template gen_winding.mako
2018-11-10 14:40:45,618 use template magnetSector.mako
2018-11-10 14:40:45,622 use template cu_losses.mako
2018-11-10 14:40:45,623 use template pm_sym_fast.mako
2018-11-10 14:40:45,625 use template plots.mako
2018-11-10 14:40:45,628 Prepare: stator.statorRotor3.slot_width = 0.0055
2018-11-10 14:40:45,629 Prepare: magnet.magnetSector.magn_width_pct = 0.7525
2018-11-10 14:40:45,629 Prepare: magnet.magnetSector.magn_shape = 0.026375000000000003
2018-11-10 14:40:45,631 prepare [0.0055 0.7525 0.026375]
2018-11-10 14:40:45,633 use template new_model.mako
2018-11-10 14:40:45,635 use template cu_losses.mako
2018-11-10 14:40:45,636 use template statorRotor3.mako
2018-11-10 14:40:45,638 use template gen_winding.mako
2018-11-10 14:40:45,639 use template magnetSector.mako
2018-11-10 14:40:45,640 use template cu_losses.mako
2018-11-10 14:40:45,641 use template pm_sym_fast.mako
2018-11-10 14:40:45,642 use template plots.mako
2018-11-10 14:40:45,646 Prepare: stator.statorRotor3.slot_width = 0.00675
2018-11-10 14:40:45,646 Prepare: magnet.magnetSector.magn_width_pct = 0.7525
2018-11-10 14:40:45,647 Prepare: magnet.magnetSector.magn_shape = 0.026375000000000003
2018-11-10 14:40:45,648 prepare [0.00675 0.7525 0.026375]
2018-11-10 14:40:45,649 use template new_model.mako
2018-11-10 14:40:45,652 use template cu_losses.mako
2018-11-10 14:40:45,652 use template statorRotor3.mako
2018-11-10 14:40:45,653 use template gen_winding.mako
2018-11-10 14:40:45,655 use template magnetSector.mako
2018-11-10 14:40:45,656 use template cu_losses.mako
2018-11-10 14:40:45,657 use template pm_sym_fast.mako
2018-11-10 14:40:45,658 use template plots.mako
2018-11-10 14:40:45,683 Started 17
2018-11-10 14:40:45,684 FEMAG /home/tar/parvar2/0: femag.fsl
2018-11-10 14:40:45,686 FEMAG /home/tar/parvar2/1: femag.fsl
2018-11-10 14:40:45,687 FEMAG /home/tar/parvar2/2: femag.fsl
2018-11-10 14:40:45,688 FEMAG /home/tar/parvar2/3: femag.fsl
2018-11-10 14:41:19,253 Finished pid: 16245 return 0
2018-11-10 14:41:19,255 FEMAG /home/tar/parvar2/4: femag.fsl
2018-11-10 14:41:19,525 Finished pid: 16240 return 0
2018-11-10 14:41:19,527 FEMAG /home/tar/parvar2/5: femag.fsl
2018-11-10 14:41:19,565 Finished pid: 16243 return 0
2018-11-10 14:41:19,568 FEMAG /home/tar/parvar2/6: femag.fsl
2018-11-10 14:41:19,633 Finished pid: 16244 return 0
2018-11-10 14:41:19,637 FEMAG /home/tar/parvar2/7: femag.fsl
2018-11-10 14:41:52,491 Finished pid: 16256 return 0
2018-11-10 14:41:52,493 FEMAG /home/tar/parvar2/8: femag.fsl
2018-11-10 14:41:52,598 Finished pid: 16261 return 0
2018-11-10 14:41:52,600 FEMAG /home/tar/parvar2/9: femag.fsl
2018-11-10 14:41:52,943 Finished pid: 16266 return 0
2018-11-10 14:41:52,945 FEMAG /home/tar/parvar2/10: femag.fsl
2018-11-10 14:41:53,326 Finished pid: 16271 return 0
2018-11-10 14:41:53,329 FEMAG /home/tar/parvar2/11: femag.fsl
2018-11-10 14:42:23,899 Finished pid: 16287 return 0
2018-11-10 14:42:23,901 FEMAG /home/tar/parvar2/12: femag.fsl
2018-11-10 14:42:24,018 Finished pid: 16292 return 0
2018-11-10 14:42:24,021 FEMAG /home/tar/parvar2/13: femag.fsl
2018-11-10 14:42:24,709 Finished pid: 16297 return 0
2018-11-10 14:42:24,712 FEMAG /home/tar/parvar2/14: femag.fsl
2018-11-10 14:42:25,735 Finished pid: 16302 return 0
2018-11-10 14:42:25,737 FEMAG /home/tar/parvar2/15: femag.fsl
2018-11-10 14:42:55,896 Finished pid: 16316 return 0
2018-11-10 14:42:55,902 FEMAG /home/tar/parvar2/16: femag.fsl
2018-11-10 14:42:56,505 Finished pid: 16321 return 0
2018-11-10 14:42:57,540 Finished pid: 16326 return 0
2018-11-10 14:42:57,884 Finished pid: 16332 return 0
2018-11-10 14:43:14,994 Finished pid: 16347 return 0
2018-11-10 14:43:14,996 Reading /home/tar/parvar2/0/PM-4-130_001.BATCH
2018-11-10 14:43:15,004 Reading /home/tar/parvar2/1/PM-4-130_001.BATCH
2018-11-10 14:43:15,010 Reading /home/tar/parvar2/2/PM-4-130_001.BATCH
2018-11-10 14:43:15,017 Reading /home/tar/parvar2/3/PM-4-130_001.BATCH
2018-11-10 14:43:15,025 Reading /home/tar/parvar2/4/PM-4-130_001.BATCH
2018-11-10 14:43:15,032 Reading /home/tar/parvar2/5/PM-4-130_001.BATCH
2018-11-10 14:43:15,043 Reading /home/tar/parvar2/6/PM-4-130_001.BATCH
2018-11-10 14:43:15,053 Reading /home/tar/parvar2/7/PM-4-130_001.BATCH
2018-11-10 14:43:15,061 Reading /home/tar/parvar2/8/PM-4-130_001.BATCH
2018-11-10 14:43:15,069 Reading /home/tar/parvar2/9/PM-4-130_001.BATCH
2018-11-10 14:43:15,076 Reading /home/tar/parvar2/10/PM-4-130_001.BATCH
2018-11-10 14:43:15,083 Reading /home/tar/parvar2/11/PM-4-130_001.BATCH
2018-11-10 14:43:15,091 Reading /home/tar/parvar2/12/PM-4-130_001.BATCH
2018-11-10 14:43:15,098 Reading /home/tar/parvar2/13/PM-4-130_001.BATCH
2018-11-10 14:43:15,105 Reading /home/tar/parvar2/14/PM-4-130_001.BATCH
2018-11-10 14:43:15,114 Reading /home/tar/parvar2/15/PM-4-130_001.BATCH
2018-11-10 14:43:15,121 Reading /home/tar/parvar2/16/PM-4-130_001.BATCH
2018-11-10 14:43:15,128 ........ 3 / 7
2018-11-10 14:43:15,128 rm /home/tar/parvar2/0
2018-11-10 14:43:15,133 rm /home/tar/parvar2/1
2018-11-10 14:43:15,139 rm /home/tar/parvar2/2
2018-11-10 14:43:15,145 rm /home/tar/parvar2/3
2018-11-10 14:43:15,150 rm /home/tar/parvar2/4
2018-11-10 14:43:15,155 rm /home/tar/parvar2/5
2018-11-10 14:43:15,160 rm /home/tar/parvar2/6
2018-11-10 14:43:15,165 rm /home/tar/parvar2/7
2018-11-10 14:43:15,170 rm /home/tar/parvar2/8
2018-11-10 14:43:15,175 rm /home/tar/parvar2/9
2018-11-10 14:43:15,181 rm /home/tar/parvar2/10
2018-11-10 14:43:15,186 rm /home/tar/parvar2/11
2018-11-10 14:43:15,191 rm /home/tar/parvar2/12
2018-11-10 14:43:15,196 rm /home/tar/parvar2/13
2018-11-10 14:43:15,202 rm /home/tar/parvar2/14
2018-11-10 14:43:15,208 rm /home/tar/parvar2/15
2018-11-10 14:43:15,214 rm /home/tar/parvar2/16
2018-11-10 14:43:15,220 Prepare: stator.statorRotor3.slot_width = 0.008
2018-11-10 14:43:15,220 Prepare: magnet.magnetSector.magn_width_pct = 0.7525
2018-11-10 14:43:15,221 Prepare: magnet.magnetSector.magn_shape = 0.026375000000000003
2018-11-10 14:43:15,222 prepare [0.008 0.7525 0.026375]
2018-11-10 14:43:15,224 use template new_model.mako
2018-11-10 14:43:15,225 use template cu_losses.mako
2018-11-10 14:43:15,226 use template statorRotor3.mako
2018-11-10 14:43:15,227 use template gen_winding.mako
2018-11-10 14:43:15,228 use template magnetSector.mako
2018-11-10 14:43:15,229 use template cu_losses.mako
2018-11-10 14:43:15,233 use template pm_sym_fast.mako
2018-11-10 14:43:15,235 use template plots.mako
2018-11-10 14:43:15,239 Prepare: stator.statorRotor3.slot_width = 0.003
2018-11-10 14:43:15,240 Prepare: magnet.magnetSector.magn_width_pct = 0.7849999999999999
2018-11-10 14:43:15,241 Prepare: magnet.magnetSector.magn_shape = 0.026375000000000003
2018-11-10 14:43:15,243 prepare [0.003 0.785 0.026375]
2018-11-10 14:43:15,246 use template new_model.mako
2018-11-10 14:43:15,248 use template cu_losses.mako
2018-11-10 14:43:15,249 use template statorRotor3.mako
2018-11-10 14:43:15,250 use template gen_winding.mako
2018-11-10 14:43:15,251 use template magnetSector.mako
2018-11-10 14:43:15,251 use template cu_losses.mako
2018-11-10 14:43:15,252 use template pm_sym_fast.mako
2018-11-10 14:43:15,253 use template plots.mako
2018-11-10 14:43:15,255 Prepare: stator.statorRotor3.slot_width = 0.00425
2018-11-10 14:43:15,256 Prepare: magnet.magnetSector.magn_width_pct = 0.7849999999999999
2018-11-10 14:43:15,257 Prepare: magnet.magnetSector.magn_shape = 0.026375000000000003
2018-11-10 14:43:15,258 prepare [0.00425 0.785 0.026375]
2018-11-10 14:43:15,259 use template new_model.mako
2018-11-10 14:43:15,260 use template cu_losses.mako
2018-11-10 14:43:15,261 use template statorRotor3.mako
2018-11-10 14:43:15,262 use template gen_winding.mako
2018-11-10 14:43:15,262 use template magnetSector.mako
2018-11-10 14:43:15,263 use template cu_losses.mako
2018-11-10 14:43:15,264 use template pm_sym_fast.mako
2018-11-10 14:43:15,265 use template plots.mako
2018-11-10 14:43:15,269 Prepare: stator.statorRotor3.slot_width = 0.0055
2018-11-10 14:43:15,270 Prepare: magnet.magnetSector.magn_width_pct = 0.7849999999999999
2018-11-10 14:43:15,271 Prepare: magnet.magnetSector.magn_shape = 0.026375000000000003
2018-11-10 14:43:15,272 prepare [0.0055 0.785 0.026375]
2018-11-10 14:43:15,273 use template new_model.mako
2018-11-10 14:43:15,275 use template cu_losses.mako
2018-11-10 14:43:15,276 use template statorRotor3.mako
2018-11-10 14:43:15,276 use template gen_winding.mako
2018-11-10 14:43:15,277 use template magnetSector.mako
2018-11-10 14:43:15,284 use template cu_losses.mako
2018-11-10 14:43:15,286 use template pm_sym_fast.mako
2018-11-10 14:43:15,287 use template plots.mako
2018-11-10 14:43:15,290 Prepare: stator.statorRotor3.slot_width = 0.00675
2018-11-10 14:43:15,291 Prepare: magnet.magnetSector.magn_width_pct = 0.7849999999999999
2018-11-10 14:43:15,292 Prepare: magnet.magnetSector.magn_shape = 0.026375000000000003
2018-11-10 14:43:15,293 prepare [0.00675 0.785 0.026375]
2018-11-10 14:43:15,294 use template new_model.mako
2018-11-10 14:43:15,295 use template cu_losses.mako
2018-11-10 14:43:15,297 use template statorRotor3.mako
2018-11-10 14:43:15,299 use template gen_winding.mako
2018-11-10 14:43:15,300 use template magnetSector.mako
2018-11-10 14:43:15,301 use template cu_losses.mako
2018-11-10 14:43:15,302 use template pm_sym_fast.mako
2018-11-10 14:43:15,303 use template plots.mako
2018-11-10 14:43:15,307 Prepare: stator.statorRotor3.slot_width = 0.008
2018-11-10 14:43:15,308 Prepare: magnet.magnetSector.magn_width_pct = 0.7849999999999999
2018-11-10 14:43:15,308 Prepare: magnet.magnetSector.magn_shape = 0.026375000000000003
2018-11-10 14:43:15,309 prepare [0.008 0.785 0.026375]
2018-11-10 14:43:15,310 use template new_model.mako
2018-11-10 14:43:15,311 use template cu_losses.mako
2018-11-10 14:43:15,313 use template statorRotor3.mako
2018-11-10 14:43:15,314 use template gen_winding.mako
2018-11-10 14:43:15,315 use template magnetSector.mako
2018-11-10 14:43:15,316 use template cu_losses.mako
2018-11-10 14:43:15,318 use template pm_sym_fast.mako
2018-11-10 14:43:15,319 use template plots.mako
2018-11-10 14:43:15,323 Prepare: stator.statorRotor3.slot_width = 0.003
2018-11-10 14:43:15,324 Prepare: magnet.magnetSector.magn_width_pct = 0.8175
2018-11-10 14:43:15,324 Prepare: magnet.magnetSector.magn_shape = 0.026375000000000003
2018-11-10 14:43:15,326 prepare [0.003 0.8175 0.026375]
2018-11-10 14:43:15,327 use template new_model.mako
2018-11-10 14:43:15,329 use template cu_losses.mako
2018-11-10 14:43:15,330 use template statorRotor3.mako
2018-11-10 14:43:15,331 use template gen_winding.mako
2018-11-10 14:43:15,334 use template magnetSector.mako
2018-11-10 14:43:15,336 use template cu_losses.mako
2018-11-10 14:43:15,337 use template pm_sym_fast.mako
2018-11-10 14:43:15,339 use template plots.mako
2018-11-10 14:43:15,342 Prepare: stator.statorRotor3.slot_width = 0.00425
2018-11-10 14:43:15,343 Prepare: magnet.magnetSector.magn_width_pct = 0.8175
2018-11-10 14:43:15,344 Prepare: magnet.magnetSector.magn_shape = 0.026375000000000003
2018-11-10 14:43:15,345 prepare [0.00425 0.8175 0.026375]
2018-11-10 14:43:15,347 use template new_model.mako
2018-11-10 14:43:15,348 use template cu_losses.mako
2018-11-10 14:43:15,349 use template statorRotor3.mako
2018-11-10 14:43:15,350 use template gen_winding.mako
2018-11-10 14:43:15,351 use template magnetSector.mako
2018-11-10 14:43:15,352 use template cu_losses.mako
2018-11-10 14:43:15,353 use template pm_sym_fast.mako
2018-11-10 14:43:15,354 use template plots.mako
2018-11-10 14:43:15,357 Prepare: stator.statorRotor3.slot_width = 0.0055
2018-11-10 14:43:15,357 Prepare: magnet.magnetSector.magn_width_pct = 0.8175
2018-11-10 14:43:15,358 Prepare: magnet.magnetSector.magn_shape = 0.026375000000000003
2018-11-10 14:43:15,359 prepare [0.0055 0.8175 0.026375]
2018-11-10 14:43:15,360 use template new_model.mako
2018-11-10 14:43:15,362 use template cu_losses.mako
2018-11-10 14:43:15,363 use template statorRotor3.mako
2018-11-10 14:43:15,364 use template gen_winding.mako
2018-11-10 14:43:15,365 use template magnetSector.mako
2018-11-10 14:43:15,366 use template cu_losses.mako
2018-11-10 14:43:15,367 use template pm_sym_fast.mako
2018-11-10 14:43:15,368 use template plots.mako
2018-11-10 14:43:15,371 Prepare: stator.statorRotor3.slot_width = 0.00675
2018-11-10 14:43:15,372 Prepare: magnet.magnetSector.magn_width_pct = 0.8175
2018-11-10 14:43:15,373 Prepare: magnet.magnetSector.magn_shape = 0.026375000000000003
2018-11-10 14:43:15,374 prepare [0.00675 0.8175 0.026375]
2018-11-10 14:43:15,375 use template new_model.mako
2018-11-10 14:43:15,376 use template cu_losses.mako
2018-11-10 14:43:15,377 use template statorRotor3.mako
2018-11-10 14:43:15,379 use template gen_winding.mako
2018-11-10 14:43:15,380 use template magnetSector.mako
2018-11-10 14:43:15,381 use template cu_losses.mako
2018-11-10 14:43:15,382 use template pm_sym_fast.mako
2018-11-10 14:43:15,384 use template plots.mako
2018-11-10 14:43:15,386 Prepare: stator.statorRotor3.slot_width = 0.008
2018-11-10 14:43:15,388 Prepare: magnet.magnetSector.magn_width_pct = 0.8175
2018-11-10 14:43:15,389 Prepare: magnet.magnetSector.magn_shape = 0.026375000000000003
2018-11-10 14:43:15,390 prepare [0.008 0.8175 0.026375]
2018-11-10 14:43:15,391 use template new_model.mako
2018-11-10 14:43:15,392 use template cu_losses.mako
2018-11-10 14:43:15,394 use template statorRotor3.mako
2018-11-10 14:43:15,395 use template gen_winding.mako
2018-11-10 14:43:15,396 use template magnetSector.mako
2018-11-10 14:43:15,399 use template cu_losses.mako
2018-11-10 14:43:15,400 use template pm_sym_fast.mako
2018-11-10 14:43:15,401 use template plots.mako
2018-11-10 14:43:15,403 Prepare: stator.statorRotor3.slot_width = 0.003
2018-11-10 14:43:15,409 Prepare: magnet.magnetSector.magn_width_pct = 0.85
2018-11-10 14:43:15,410 Prepare: magnet.magnetSector.magn_shape = 0.026375000000000003
2018-11-10 14:43:15,410 prepare [0.003 0.85 0.026375]
2018-11-10 14:43:15,412 use template new_model.mako
2018-11-10 14:43:15,415 use template cu_losses.mako
2018-11-10 14:43:15,416 use template statorRotor3.mako
2018-11-10 14:43:15,418 use template gen_winding.mako
2018-11-10 14:43:15,419 use template magnetSector.mako
2018-11-10 14:43:15,420 use template cu_losses.mako
2018-11-10 14:43:15,422 use template pm_sym_fast.mako
2018-11-10 14:43:15,423 use template plots.mako
2018-11-10 14:43:15,428 Prepare: stator.statorRotor3.slot_width = 0.00425
2018-11-10 14:43:15,429 Prepare: magnet.magnetSector.magn_width_pct = 0.85
2018-11-10 14:43:15,430 Prepare: magnet.magnetSector.magn_shape = 0.026375000000000003
2018-11-10 14:43:15,431 prepare [0.00425 0.85 0.026375]
2018-11-10 14:43:15,433 use template new_model.mako
2018-11-10 14:43:15,434 use template cu_losses.mako
2018-11-10 14:43:15,434 use template statorRotor3.mako
2018-11-10 14:43:15,435 use template gen_winding.mako
2018-11-10 14:43:15,436 use template magnetSector.mako
2018-11-10 14:43:15,437 use template cu_losses.mako
2018-11-10 14:43:15,438 use template pm_sym_fast.mako
2018-11-10 14:43:15,439 use template plots.mako
2018-11-10 14:43:15,445 Prepare: stator.statorRotor3.slot_width = 0.0055
2018-11-10 14:43:15,450 Prepare: magnet.magnetSector.magn_width_pct = 0.85
2018-11-10 14:43:15,450 Prepare: magnet.magnetSector.magn_shape = 0.026375000000000003
2018-11-10 14:43:15,451 prepare [0.0055 0.85 0.026375]
2018-11-10 14:43:15,452 use template new_model.mako
2018-11-10 14:43:15,453 use template cu_losses.mako
2018-11-10 14:43:15,454 use template statorRotor3.mako
2018-11-10 14:43:15,455 use template gen_winding.mako
2018-11-10 14:43:15,456 use template magnetSector.mako
2018-11-10 14:43:15,457 use template cu_losses.mako
2018-11-10 14:43:15,458 use template pm_sym_fast.mako
2018-11-10 14:43:15,459 use template plots.mako
2018-11-10 14:43:15,462 Prepare: stator.statorRotor3.slot_width = 0.00675
2018-11-10 14:43:15,463 Prepare: magnet.magnetSector.magn_width_pct = 0.85
2018-11-10 14:43:15,464 Prepare: magnet.magnetSector.magn_shape = 0.026375000000000003
2018-11-10 14:43:15,465 prepare [0.00675 0.85 0.026375]
2018-11-10 14:43:15,467 use template new_model.mako
2018-11-10 14:43:15,468 use template cu_losses.mako
2018-11-10 14:43:15,470 use template statorRotor3.mako
2018-11-10 14:43:15,481 use template gen_winding.mako
2018-11-10 14:43:15,482 use template magnetSector.mako
2018-11-10 14:43:15,483 use template cu_losses.mako
2018-11-10 14:43:15,484 use template pm_sym_fast.mako
2018-11-10 14:43:15,484 use template plots.mako
2018-11-10 14:43:15,488 Prepare: stator.statorRotor3.slot_width = 0.008
2018-11-10 14:43:15,489 Prepare: magnet.magnetSector.magn_width_pct = 0.85
2018-11-10 14:43:15,490 Prepare: magnet.magnetSector.magn_shape = 0.026375000000000003
2018-11-10 14:43:15,490 prepare [0.008 0.85 0.026375]
2018-11-10 14:43:15,491 use template new_model.mako
2018-11-10 14:43:15,492 use template cu_losses.mako
2018-11-10 14:43:15,493 use template statorRotor3.mako
2018-11-10 14:43:15,494 use template gen_winding.mako
2018-11-10 14:43:15,495 use template magnetSector.mako
2018-11-10 14:43:15,496 use template cu_losses.mako
2018-11-10 14:43:15,497 use template pm_sym_fast.mako
2018-11-10 14:43:15,499 use template plots.mako
2018-11-10 14:43:15,503 Prepare: stator.statorRotor3.slot_width = 0.003
2018-11-10 14:43:15,504 Prepare: magnet.magnetSector.magn_width_pct = 0.72
2018-11-10 14:43:15,505 Prepare: magnet.magnetSector.magn_shape = 0.02875
2018-11-10 14:43:15,506 prepare [0.003 0.72 0.02875]
2018-11-10 14:43:15,507 use template new_model.mako
2018-11-10 14:43:15,508 use template cu_losses.mako
2018-11-10 14:43:15,509 use template statorRotor3.mako
2018-11-10 14:43:15,510 use template gen_winding.mako
2018-11-10 14:43:15,511 use template magnetSector.mako
2018-11-10 14:43:15,512 use template cu_losses.mako
2018-11-10 14:43:15,513 use template pm_sym_fast.mako
2018-11-10 14:43:15,514 use template plots.mako
2018-11-10 14:43:15,541 Started 17
2018-11-10 14:43:15,542 FEMAG /home/tar/parvar2/0: femag.fsl
2018-11-10 14:43:15,544 FEMAG /home/tar/parvar2/2: femag.fsl
2018-11-10 14:43:15,544 FEMAG /home/tar/parvar2/3: femag.fsl
2018-11-10 14:43:15,544 FEMAG /home/tar/parvar2/1: femag.fsl
2018-11-10 14:43:48,433 Finished pid: 16377 return 0
2018-11-10 14:43:48,435 FEMAG /home/tar/parvar2/4: femag.fsl
2018-11-10 14:43:48,932 Finished pid: 16378 return 0
2018-11-10 14:43:48,934 FEMAG /home/tar/parvar2/5: femag.fsl
2018-11-10 14:43:49,152 Finished pid: 16380 return 0
2018-11-10 14:43:49,158 FEMAG /home/tar/parvar2/6: femag.fsl
2018-11-10 14:43:49,462 Finished pid: 16379 return 0
2018-11-10 14:43:49,464 FEMAG /home/tar/parvar2/7: femag.fsl
2018-11-10 14:44:21,924 Finished pid: 16395 return 0
2018-11-10 14:44:21,930 FEMAG /home/tar/parvar2/8: femag.fsl
2018-11-10 14:44:22,483 Finished pid: 16400 return 0
2018-11-10 14:44:22,485 FEMAG /home/tar/parvar2/9: femag.fsl
2018-11-10 14:44:23,717 Finished pid: 16405 return 0
2018-11-10 14:44:23,722 FEMAG /home/tar/parvar2/10: femag.fsl
2018-11-10 14:44:23,817 Finished pid: 16410 return 0
2018-11-10 14:44:23,818 FEMAG /home/tar/parvar2/11: femag.fsl
2018-11-10 14:44:56,232 Finished pid: 16424 return 0
2018-11-10 14:44:56,239 FEMAG /home/tar/parvar2/12: femag.fsl
2018-11-10 14:44:56,773 Finished pid: 16429 return 0
2018-11-10 14:44:56,775 FEMAG /home/tar/parvar2/13: femag.fsl
2018-11-10 14:44:57,205 Finished pid: 16441 return 0
2018-11-10 14:44:57,207 FEMAG /home/tar/parvar2/14: femag.fsl
2018-11-10 14:44:58,853 Finished pid: 16436 return 0
2018-11-10 14:44:58,861 FEMAG /home/tar/parvar2/15: femag.fsl
2018-11-10 14:45:29,778 Finished pid: 16458 return 0
2018-11-10 14:45:29,787 FEMAG /home/tar/parvar2/16: femag.fsl
2018-11-10 14:45:29,884 Finished pid: 16463 return 0
2018-11-10 14:45:30,485 Finished pid: 16468 return 0
2018-11-10 14:45:32,049 Finished pid: 16473 return 0
2018-11-10 14:45:42,164 Finished pid: 16488 return 0
2018-11-10 14:45:42,166 Reading /home/tar/parvar2/0/PM-4-130_001.BATCH
2018-11-10 14:45:42,176 Reading /home/tar/parvar2/1/PM-4-130_001.BATCH
2018-11-10 14:45:42,183 Reading /home/tar/parvar2/2/PM-4-130_001.BATCH
2018-11-10 14:45:42,191 Reading /home/tar/parvar2/3/PM-4-130_001.BATCH
2018-11-10 14:45:42,201 Reading /home/tar/parvar2/4/PM-4-130_001.BATCH
2018-11-10 14:45:42,209 Reading /home/tar/parvar2/5/PM-4-130_001.BATCH
2018-11-10 14:45:42,216 Reading /home/tar/parvar2/6/PM-4-130_001.BATCH
2018-11-10 14:45:42,223 Reading /home/tar/parvar2/7/PM-4-130_001.BATCH
2018-11-10 14:45:42,230 Reading /home/tar/parvar2/8/PM-4-130_001.BATCH
2018-11-10 14:45:42,237 Reading /home/tar/parvar2/9/PM-4-130_001.BATCH
2018-11-10 14:45:42,244 Reading /home/tar/parvar2/10/PM-4-130_001.BATCH
2018-11-10 14:45:42,251 Reading /home/tar/parvar2/11/PM-4-130_001.BATCH
2018-11-10 14:45:42,258 Reading /home/tar/parvar2/12/PM-4-130_001.BATCH
2018-11-10 14:45:42,264 Reading /home/tar/parvar2/13/PM-4-130_001.BATCH
2018-11-10 14:45:42,272 Reading /home/tar/parvar2/14/PM-4-130_001.BATCH
2018-11-10 14:45:42,280 Reading /home/tar/parvar2/15/PM-4-130_001.BATCH
2018-11-10 14:45:42,288 Reading /home/tar/parvar2/16/PM-4-130_001.BATCH
2018-11-10 14:45:42,294 ........ 4 / 7
2018-11-10 14:45:42,295 rm /home/tar/parvar2/0
2018-11-10 14:45:42,300 rm /home/tar/parvar2/1
2018-11-10 14:45:42,305 rm /home/tar/parvar2/2
2018-11-10 14:45:42,310 rm /home/tar/parvar2/3
2018-11-10 14:45:42,315 rm /home/tar/parvar2/4
2018-11-10 14:45:42,320 rm /home/tar/parvar2/5
2018-11-10 14:45:42,325 rm /home/tar/parvar2/6
2018-11-10 14:45:42,330 rm /home/tar/parvar2/7
2018-11-10 14:45:42,335 rm /home/tar/parvar2/8
2018-11-10 14:45:42,340 rm /home/tar/parvar2/9
2018-11-10 14:45:42,345 rm /home/tar/parvar2/10
2018-11-10 14:45:42,351 rm /home/tar/parvar2/11
2018-11-10 14:45:42,356 rm /home/tar/parvar2/12
2018-11-10 14:45:42,361 rm /home/tar/parvar2/13
2018-11-10 14:45:42,367 rm /home/tar/parvar2/14
2018-11-10 14:45:42,372 rm /home/tar/parvar2/15
2018-11-10 14:45:42,378 rm /home/tar/parvar2/16
2018-11-10 14:45:42,383 Prepare: stator.statorRotor3.slot_width = 0.00425
2018-11-10 14:45:42,384 Prepare: magnet.magnetSector.magn_width_pct = 0.72
2018-11-10 14:45:42,384 Prepare: magnet.magnetSector.magn_shape = 0.02875
2018-11-10 14:45:42,385 prepare [0.00425 0.72 0.02875]
2018-11-10 14:45:42,386 use template new_model.mako
2018-11-10 14:45:42,387 use template cu_losses.mako
2018-11-10 14:45:42,388 use template statorRotor3.mako
2018-11-10 14:45:42,389 use template gen_winding.mako
2018-11-10 14:45:42,389 use template magnetSector.mako
2018-11-10 14:45:42,390 use template cu_losses.mako
2018-11-10 14:45:42,391 use template pm_sym_fast.mako
2018-11-10 14:45:42,392 use template plots.mako
2018-11-10 14:45:42,395 Prepare: stator.statorRotor3.slot_width = 0.0055
2018-11-10 14:45:42,395 Prepare: magnet.magnetSector.magn_width_pct = 0.72
2018-11-10 14:45:42,396 Prepare: magnet.magnetSector.magn_shape = 0.02875
2018-11-10 14:45:42,397 prepare [0.0055 0.72 0.02875]
2018-11-10 14:45:42,398 use template new_model.mako
2018-11-10 14:45:42,399 use template cu_losses.mako
2018-11-10 14:45:42,400 use template statorRotor3.mako
2018-11-10 14:45:42,401 use template gen_winding.mako
2018-11-10 14:45:42,404 use template magnetSector.mako
2018-11-10 14:45:42,406 use template cu_losses.mako
2018-11-10 14:45:42,407 use template pm_sym_fast.mako
2018-11-10 14:45:42,408 use template plots.mako
2018-11-10 14:45:42,413 Prepare: stator.statorRotor3.slot_width = 0.00675
2018-11-10 14:45:42,414 Prepare: magnet.magnetSector.magn_width_pct = 0.72
2018-11-10 14:45:42,414 Prepare: magnet.magnetSector.magn_shape = 0.02875
2018-11-10 14:45:42,415 prepare [0.00675 0.72 0.02875]
2018-11-10 14:45:42,417 use template new_model.mako
2018-11-10 14:45:42,418 use template cu_losses.mako
2018-11-10 14:45:42,419 use template statorRotor3.mako
2018-11-10 14:45:42,420 use template gen_winding.mako
2018-11-10 14:45:42,421 use template magnetSector.mako
2018-11-10 14:45:42,423 use template cu_losses.mako
2018-11-10 14:45:42,424 use template pm_sym_fast.mako
2018-11-10 14:45:42,426 use template plots.mako
2018-11-10 14:45:42,430 Prepare: stator.statorRotor3.slot_width = 0.008
2018-11-10 14:45:42,431 Prepare: magnet.magnetSector.magn_width_pct = 0.72
2018-11-10 14:45:42,431 Prepare: magnet.magnetSector.magn_shape = 0.02875
2018-11-10 14:45:42,433 prepare [0.008 0.72 0.02875]
2018-11-10 14:45:42,434 use template new_model.mako
2018-11-10 14:45:42,435 use template cu_losses.mako
2018-11-10 14:45:42,436 use template statorRotor3.mako
2018-11-10 14:45:42,436 use template gen_winding.mako
2018-11-10 14:45:42,437 use template magnetSector.mako
2018-11-10 14:45:42,438 use template cu_losses.mako
2018-11-10 14:45:42,439 use template pm_sym_fast.mako
2018-11-10 14:45:42,440 use template plots.mako
2018-11-10 14:45:42,443 Prepare: stator.statorRotor3.slot_width = 0.003
2018-11-10 14:45:42,443 Prepare: magnet.magnetSector.magn_width_pct = 0.7525
2018-11-10 14:45:42,444 Prepare: magnet.magnetSector.magn_shape = 0.02875
2018-11-10 14:45:42,446 prepare [0.003 0.7525 0.02875]
2018-11-10 14:45:42,447 use template new_model.mako
2018-11-10 14:45:42,449 use template cu_losses.mako
2018-11-10 14:45:42,450 use template statorRotor3.mako
2018-11-10 14:45:42,452 use template gen_winding.mako
2018-11-10 14:45:42,453 use template magnetSector.mako
2018-11-10 14:45:42,454 use template cu_losses.mako
2018-11-10 14:45:42,456 use template pm_sym_fast.mako
2018-11-10 14:45:42,457 use template plots.mako
2018-11-10 14:45:42,461 Prepare: stator.statorRotor3.slot_width = 0.00425
2018-11-10 14:45:42,462 Prepare: magnet.magnetSector.magn_width_pct = 0.7525
2018-11-10 14:45:42,463 Prepare: magnet.magnetSector.magn_shape = 0.02875
2018-11-10 14:45:42,464 prepare [0.00425 0.7525 0.02875]
2018-11-10 14:45:42,466 use template new_model.mako
2018-11-10 14:45:42,468 use template cu_losses.mako
2018-11-10 14:45:42,468 use template statorRotor3.mako
2018-11-10 14:45:42,469 use template gen_winding.mako
2018-11-10 14:45:42,470 use template magnetSector.mako
2018-11-10 14:45:42,471 use template cu_losses.mako
2018-11-10 14:45:42,472 use template pm_sym_fast.mako
2018-11-10 14:45:42,473 use template plots.mako
2018-11-10 14:45:42,475 Prepare: stator.statorRotor3.slot_width = 0.0055
2018-11-10 14:45:42,476 Prepare: magnet.magnetSector.magn_width_pct = 0.7525
2018-11-10 14:45:42,477 Prepare: magnet.magnetSector.magn_shape = 0.02875
2018-11-10 14:45:42,479 prepare [0.0055 0.7525 0.02875]
2018-11-10 14:45:42,480 use template new_model.mako
2018-11-10 14:45:42,481 use template cu_losses.mako
2018-11-10 14:45:42,482 use template statorRotor3.mako
2018-11-10 14:45:42,484 use template gen_winding.mako
2018-11-10 14:45:42,485 use template magnetSector.mako
2018-11-10 14:45:42,486 use template cu_losses.mako
2018-11-10 14:45:42,487 use template pm_sym_fast.mako
2018-11-10 14:45:42,488 use template plots.mako
2018-11-10 14:45:42,491 Prepare: stator.statorRotor3.slot_width = 0.00675
2018-11-10 14:45:42,492 Prepare: magnet.magnetSector.magn_width_pct = 0.7525
2018-11-10 14:45:42,493 Prepare: magnet.magnetSector.magn_shape = 0.02875
2018-11-10 14:45:42,494 prepare [0.00675 0.7525 0.02875]
2018-11-10 14:45:42,495 use template new_model.mako
2018-11-10 14:45:42,496 use template cu_losses.mako
2018-11-10 14:45:42,497 use template statorRotor3.mako
2018-11-10 14:45:42,498 use template gen_winding.mako
2018-11-10 14:45:42,504 use template magnetSector.mako
2018-11-10 14:45:42,505 use template cu_losses.mako
2018-11-10 14:45:42,510 use template pm_sym_fast.mako
2018-11-10 14:45:42,511 use template plots.mako
2018-11-10 14:45:42,514 Prepare: stator.statorRotor3.slot_width = 0.008
2018-11-10 14:45:42,515 Prepare: magnet.magnetSector.magn_width_pct = 0.7525
2018-11-10 14:45:42,516 Prepare: magnet.magnetSector.magn_shape = 0.02875
2018-11-10 14:45:42,517 prepare [0.008 0.7525 0.02875]
2018-11-10 14:45:42,518 use template new_model.mako
2018-11-10 14:45:42,520 use template cu_losses.mako
2018-11-10 14:45:42,521 use template statorRotor3.mako
2018-11-10 14:45:42,522 use template gen_winding.mako
2018-11-10 14:45:42,523 use template magnetSector.mako
2018-11-10 14:45:42,524 use template cu_losses.mako
2018-11-10 14:45:42,525 use template pm_sym_fast.mako
2018-11-10 14:45:42,526 use template plots.mako
2018-11-10 14:45:42,530 Prepare: stator.statorRotor3.slot_width = 0.003
2018-11-10 14:45:42,530 Prepare: magnet.magnetSector.magn_width_pct = 0.7849999999999999
2018-11-10 14:45:42,531 Prepare: magnet.magnetSector.magn_shape = 0.02875
2018-11-10 14:45:42,532 prepare [0.003 0.785 0.02875]
2018-11-10 14:45:42,533 use template new_model.mako
2018-11-10 14:45:42,535 use template cu_losses.mako
2018-11-10 14:45:42,536 use template statorRotor3.mako
2018-11-10 14:45:42,537 use template gen_winding.mako
2018-11-10 14:45:42,538 use template magnetSector.mako
2018-11-10 14:45:42,539 use template cu_losses.mako
2018-11-10 14:45:42,540 use template pm_sym_fast.mako
2018-11-10 14:45:42,541 use template plots.mako
2018-11-10 14:45:42,544 Prepare: stator.statorRotor3.slot_width = 0.00425
2018-11-10 14:45:42,546 Prepare: magnet.magnetSector.magn_width_pct = 0.7849999999999999
2018-11-10 14:45:42,547 Prepare: magnet.magnetSector.magn_shape = 0.02875
2018-11-10 14:45:42,548 prepare [0.00425 0.785 0.02875]
2018-11-10 14:45:42,551 use template new_model.mako
2018-11-10 14:45:42,555 use template cu_losses.mako
2018-11-10 14:45:42,557 use template statorRotor3.mako
2018-11-10 14:45:42,559 use template gen_winding.mako
2018-11-10 14:45:42,561 use template magnetSector.mako
2018-11-10 14:45:42,563 use template cu_losses.mako
2018-11-10 14:45:42,568 use template pm_sym_fast.mako
2018-11-10 14:45:42,569 use template plots.mako
2018-11-10 14:45:42,573 Prepare: stator.statorRotor3.slot_width = 0.0055
2018-11-10 14:45:42,573 Prepare: magnet.magnetSector.magn_width_pct = 0.7849999999999999
2018-11-10 14:45:42,574 Prepare: magnet.magnetSector.magn_shape = 0.02875
2018-11-10 14:45:42,574 prepare [0.0055 0.785 0.02875]
2018-11-10 14:45:42,575 use template new_model.mako
2018-11-10 14:45:42,576 use template cu_losses.mako
2018-11-10 14:45:42,578 use template statorRotor3.mako
2018-11-10 14:45:42,580 use template gen_winding.mako
2018-11-10 14:45:42,581 use template magnetSector.mako
2018-11-10 14:45:42,581 use template cu_losses.mako
2018-11-10 14:45:42,583 use template pm_sym_fast.mako
2018-11-10 14:45:42,584 use template plots.mako
2018-11-10 14:45:42,587 Prepare: stator.statorRotor3.slot_width = 0.00675
2018-11-10 14:45:42,588 Prepare: magnet.magnetSector.magn_width_pct = 0.7849999999999999
2018-11-10 14:45:42,588 Prepare: magnet.magnetSector.magn_shape = 0.02875
2018-11-10 14:45:42,589 prepare [0.00675 0.785 0.02875]
2018-11-10 14:45:42,590 use template new_model.mako
2018-11-10 14:45:42,591 use template cu_losses.mako
2018-11-10 14:45:42,592 use template statorRotor3.mako
2018-11-10 14:45:42,593 use template gen_winding.mako
2018-11-10 14:45:42,594 use template magnetSector.mako
2018-11-10 14:45:42,594 use template cu_losses.mako
2018-11-10 14:45:42,595 use template pm_sym_fast.mako
2018-11-10 14:45:42,596 use template plots.mako
2018-11-10 14:45:42,605 Prepare: stator.statorRotor3.slot_width = 0.008
2018-11-10 14:45:42,606 Prepare: magnet.magnetSector.magn_width_pct = 0.7849999999999999
2018-11-10 14:45:42,607 Prepare: magnet.magnetSector.magn_shape = 0.02875
2018-11-10 14:45:42,607 prepare [0.008 0.785 0.02875]
2018-11-10 14:45:42,609 use template new_model.mako
2018-11-10 14:45:42,610 use template cu_losses.mako
2018-11-10 14:45:42,612 use template statorRotor3.mako
2018-11-10 14:45:42,613 use template gen_winding.mako
2018-11-10 14:45:42,614 use template magnetSector.mako
2018-11-10 14:45:42,615 use template cu_losses.mako
2018-11-10 14:45:42,616 use template pm_sym_fast.mako
2018-11-10 14:45:42,618 use template plots.mako
2018-11-10 14:45:42,621 Prepare: stator.statorRotor3.slot_width = 0.003
2018-11-10 14:45:42,622 Prepare: magnet.magnetSector.magn_width_pct = 0.8175
2018-11-10 14:45:42,623 Prepare: magnet.magnetSector.magn_shape = 0.02875
2018-11-10 14:45:42,624 prepare [0.003 0.8175 0.02875]
2018-11-10 14:45:42,626 use template new_model.mako
2018-11-10 14:45:42,627 use template cu_losses.mako
2018-11-10 14:45:42,632 use template statorRotor3.mako
2018-11-10 14:45:42,633 use template gen_winding.mako
2018-11-10 14:45:42,634 use template magnetSector.mako
2018-11-10 14:45:42,636 use template cu_losses.mako
2018-11-10 14:45:42,637 use template pm_sym_fast.mako
2018-11-10 14:45:42,638 use template plots.mako
2018-11-10 14:45:42,641 Prepare: stator.statorRotor3.slot_width = 0.00425
2018-11-10 14:45:42,643 Prepare: magnet.magnetSector.magn_width_pct = 0.8175
2018-11-10 14:45:42,644 Prepare: magnet.magnetSector.magn_shape = 0.02875
2018-11-10 14:45:42,644 prepare [0.00425 0.8175 0.02875]
2018-11-10 14:45:42,645 use template new_model.mako
2018-11-10 14:45:42,647 use template cu_losses.mako
2018-11-10 14:45:42,652 use template statorRotor3.mako
2018-11-10 14:45:42,653 use template gen_winding.mako
2018-11-10 14:45:42,655 use template magnetSector.mako
2018-11-10 14:45:42,656 use template cu_losses.mako
2018-11-10 14:45:42,657 use template pm_sym_fast.mako
2018-11-10 14:45:42,658 use template plots.mako
2018-11-10 14:45:42,661 Prepare: stator.statorRotor3.slot_width = 0.0055
2018-11-10 14:45:42,662 Prepare: magnet.magnetSector.magn_width_pct = 0.8175
2018-11-10 14:45:42,663 Prepare: magnet.magnetSector.magn_shape = 0.02875
2018-11-10 14:45:42,663 prepare [0.0055 0.8175 0.02875]
2018-11-10 14:45:42,665 use template new_model.mako
2018-11-10 14:45:42,666 use template cu_losses.mako
2018-11-10 14:45:42,667 use template statorRotor3.mako
2018-11-10 14:45:42,668 use template gen_winding.mako
2018-11-10 14:45:42,669 use template magnetSector.mako
2018-11-10 14:45:42,671 use template cu_losses.mako
2018-11-10 14:45:42,672 use template pm_sym_fast.mako
2018-11-10 14:45:42,673 use template plots.mako
2018-11-10 14:45:42,701 Started 17
2018-11-10 14:45:42,702 FEMAG /home/tar/parvar2/0: femag.fsl
2018-11-10 14:45:42,703 FEMAG /home/tar/parvar2/1: femag.fsl
2018-11-10 14:45:42,716 FEMAG /home/tar/parvar2/3: femag.fsl
2018-11-10 14:45:42,708 FEMAG /home/tar/parvar2/2: femag.fsl
2018-11-10 14:46:04,804 Finished pid: 16515 return 0
2018-11-10 14:46:04,806 FEMAG /home/tar/parvar2/4: femag.fsl
2018-11-10 14:46:05,057 Finished pid: 16522 return 0
2018-11-10 14:46:05,059 FEMAG /home/tar/parvar2/5: femag.fsl
2018-11-10 14:46:05,325 Finished pid: 16518 return 0
2018-11-10 14:46:05,327 FEMAG /home/tar/parvar2/6: femag.fsl
2018-11-10 14:46:05,675 Finished pid: 16521 return 0
2018-11-10 14:46:05,679 FEMAG /home/tar/parvar2/7: femag.fsl
2018-11-10 14:46:27,184 Finished pid: 16533 return 0
2018-11-10 14:46:27,190 FEMAG /home/tar/parvar2/8: femag.fsl
2018-11-10 14:46:27,247 Finished pid: 16538 return 0
2018-11-10 14:46:27,248 FEMAG /home/tar/parvar2/9: femag.fsl
2018-11-10 14:46:27,805 Finished pid: 16544 return 0
2018-11-10 14:46:27,807 FEMAG /home/tar/parvar2/10: femag.fsl
2018-11-10 14:46:28,454 Finished pid: 16549 return 0
2018-11-10 14:46:28,456 FEMAG /home/tar/parvar2/11: femag.fsl
2018-11-10 14:46:49,796 Finished pid: 16564 return 0
2018-11-10 14:46:49,798 FEMAG /home/tar/parvar2/12: femag.fsl
2018-11-10 14:46:49,959 Finished pid: 16569 return 0
2018-11-10 14:46:49,962 FEMAG /home/tar/parvar2/13: femag.fsl
2018-11-10 14:46:50,150 Finished pid: 16559 return 0
2018-11-10 14:46:50,152 FEMAG /home/tar/parvar2/14: femag.fsl
2018-11-10 14:46:50,606 Finished pid: 16574 return 0
2018-11-10 14:46:50,614 FEMAG /home/tar/parvar2/15: femag.fsl
2018-11-10 14:47:12,192 Finished pid: 16585 return 0
2018-11-10 14:47:12,194 FEMAG /home/tar/parvar2/16: femag.fsl
2018-11-10 14:47:12,413 Finished pid: 16590 return 0
2018-11-10 14:47:13,009 Finished pid: 16596 return 0
2018-11-10 14:47:13,272 Finished pid: 16601 return 0
2018-11-10 14:47:24,903 Finished pid: 16612 return 0
2018-11-10 14:47:24,905 Reading /home/tar/parvar2/0/PM-4-130_001.BATCH
2018-11-10 14:47:24,913 Reading /home/tar/parvar2/1/PM-4-130_001.BATCH
2018-11-10 14:47:24,921 Reading /home/tar/parvar2/2/PM-4-130_001.BATCH
2018-11-10 14:47:24,928 Reading /home/tar/parvar2/3/PM-4-130_001.BATCH
2018-11-10 14:47:24,936 Reading /home/tar/parvar2/4/PM-4-130_001.BATCH
2018-11-10 14:47:24,942 Reading /home/tar/parvar2/5/PM-4-130_001.BATCH
2018-11-10 14:47:24,950 Reading /home/tar/parvar2/6/PM-4-130_001.BATCH
2018-11-10 14:47:24,957 Reading /home/tar/parvar2/7/PM-4-130_001.BATCH
2018-11-10 14:47:24,965 Reading /home/tar/parvar2/8/PM-4-130_001.BATCH
2018-11-10 14:47:24,976 Reading /home/tar/parvar2/9/PM-4-130_001.BATCH
2018-11-10 14:47:24,986 Reading /home/tar/parvar2/10/PM-4-130_001.BATCH
2018-11-10 14:47:24,993 Reading /home/tar/parvar2/11/PM-4-130_001.BATCH
2018-11-10 14:47:25,000 Reading /home/tar/parvar2/12/PM-4-130_001.BATCH
2018-11-10 14:47:25,007 Reading /home/tar/parvar2/13/PM-4-130_001.BATCH
2018-11-10 14:47:25,014 Reading /home/tar/parvar2/14/PM-4-130_001.BATCH
2018-11-10 14:47:25,022 Reading /home/tar/parvar2/15/PM-4-130_001.BATCH
2018-11-10 14:47:25,028 Reading /home/tar/parvar2/16/PM-4-130_001.BATCH
2018-11-10 14:47:25,035 ........ 5 / 7
2018-11-10 14:47:25,036 rm /home/tar/parvar2/0
2018-11-10 14:47:25,041 rm /home/tar/parvar2/1
2018-11-10 14:47:25,046 rm /home/tar/parvar2/2
2018-11-10 14:47:25,050 rm /home/tar/parvar2/3
2018-11-10 14:47:25,055 rm /home/tar/parvar2/4
2018-11-10 14:47:25,061 rm /home/tar/parvar2/5
2018-11-10 14:47:25,066 rm /home/tar/parvar2/6
2018-11-10 14:47:25,071 rm /home/tar/parvar2/7
2018-11-10 14:47:25,076 rm /home/tar/parvar2/8
2018-11-10 14:47:25,081 rm /home/tar/parvar2/9
2018-11-10 14:47:25,086 rm /home/tar/parvar2/10
2018-11-10 14:47:25,091 rm /home/tar/parvar2/11
2018-11-10 14:47:25,096 rm /home/tar/parvar2/12
2018-11-10 14:47:25,101 rm /home/tar/parvar2/13
2018-11-10 14:47:25,106 rm /home/tar/parvar2/14
2018-11-10 14:47:25,111 rm /home/tar/parvar2/15
2018-11-10 14:47:25,117 rm /home/tar/parvar2/16
2018-11-10 14:47:25,123 Prepare: stator.statorRotor3.slot_width = 0.00675
2018-11-10 14:47:25,123 Prepare: magnet.magnetSector.magn_width_pct = 0.8175
2018-11-10 14:47:25,124 Prepare: magnet.magnetSector.magn_shape = 0.02875
2018-11-10 14:47:25,125 prepare [0.00675 0.8175 0.02875]
2018-11-10 14:47:25,126 use template new_model.mako
2018-11-10 14:47:25,127 use template cu_losses.mako
2018-11-10 14:47:25,130 use template statorRotor3.mako
2018-11-10 14:47:25,131 use template gen_winding.mako
2018-11-10 14:47:25,132 use template magnetSector.mako
2018-11-10 14:47:25,133 use template cu_losses.mako
2018-11-10 14:47:25,134 use template pm_sym_fast.mako
2018-11-10 14:47:25,135 use template plots.mako
2018-11-10 14:47:25,139 Prepare: stator.statorRotor3.slot_width = 0.008
2018-11-10 14:47:25,140 Prepare: magnet.magnetSector.magn_width_pct = 0.8175
2018-11-10 14:47:25,140 Prepare: magnet.magnetSector.magn_shape = 0.02875
2018-11-10 14:47:25,141 prepare [0.008 0.8175 0.02875]
2018-11-10 14:47:25,142 use template new_model.mako
2018-11-10 14:47:25,144 use template cu_losses.mako
2018-11-10 14:47:25,150 use template statorRotor3.mako
2018-11-10 14:47:25,152 use template gen_winding.mako
2018-11-10 14:47:25,153 use template magnetSector.mako
2018-11-10 14:47:25,154 use template cu_losses.mako
2018-11-10 14:47:25,159 use template pm_sym_fast.mako
2018-11-10 14:47:25,160 use template plots.mako
2018-11-10 14:47:25,163 Prepare: stator.statorRotor3.slot_width = 0.003
2018-11-10 14:47:25,164 Prepare: magnet.magnetSector.magn_width_pct = 0.85
2018-11-10 14:47:25,164 Prepare: magnet.magnetSector.magn_shape = 0.02875
2018-11-10 14:47:25,165 prepare [0.003 0.85 0.02875]
2018-11-10 14:47:25,167 use template new_model.mako
2018-11-10 14:47:25,169 use template cu_losses.mako
2018-11-10 14:47:25,170 use template statorRotor3.mako
2018-11-10 14:47:25,172 use template gen_winding.mako
2018-11-10 14:47:25,174 use template magnetSector.mako
2018-11-10 14:47:25,176 use template cu_losses.mako
2018-11-10 14:47:25,177 use template pm_sym_fast.mako
2018-11-10 14:47:25,180 use template plots.mako
2018-11-10 14:47:25,183 Prepare: stator.statorRotor3.slot_width = 0.00425
2018-11-10 14:47:25,184 Prepare: magnet.magnetSector.magn_width_pct = 0.85
2018-11-10 14:47:25,185 Prepare: magnet.magnetSector.magn_shape = 0.02875
2018-11-10 14:47:25,186 prepare [0.00425 0.85 0.02875]
2018-11-10 14:47:25,187 use template new_model.mako
2018-11-10 14:47:25,188 use template cu_losses.mako
2018-11-10 14:47:25,189 use template statorRotor3.mako
2018-11-10 14:47:25,190 use template gen_winding.mako
2018-11-10 14:47:25,191 use template magnetSector.mako
2018-11-10 14:47:25,191 use template cu_losses.mako
2018-11-10 14:47:25,192 use template pm_sym_fast.mako
2018-11-10 14:47:25,193 use template plots.mako
2018-11-10 14:47:25,196 Prepare: stator.statorRotor3.slot_width = 0.0055
2018-11-10 14:47:25,197 Prepare: magnet.magnetSector.magn_width_pct = 0.85
2018-11-10 14:47:25,198 Prepare: magnet.magnetSector.magn_shape = 0.02875
2018-11-10 14:47:25,199 prepare [0.0055 0.85 0.02875]
2018-11-10 14:47:25,204 use template new_model.mako
2018-11-10 14:47:25,205 use template cu_losses.mako
2018-11-10 14:47:25,206 use template statorRotor3.mako
2018-11-10 14:47:25,207 use template gen_winding.mako
2018-11-10 14:47:25,212 use template magnetSector.mako
2018-11-10 14:47:25,214 use template cu_losses.mako
2018-11-10 14:47:25,216 use template pm_sym_fast.mako
2018-11-10 14:47:25,216 use template plots.mako
2018-11-10 14:47:25,219 Prepare: stator.statorRotor3.slot_width = 0.00675
2018-11-10 14:47:25,220 Prepare: magnet.magnetSector.magn_width_pct = 0.85
2018-11-10 14:47:25,220 Prepare: magnet.magnetSector.magn_shape = 0.02875
2018-11-10 14:47:25,221 prepare [0.00675 0.85 0.02875]
2018-11-10 14:47:25,222 use template new_model.mako
2018-11-10 14:47:25,224 use template cu_losses.mako
2018-11-10 14:47:25,225 use template statorRotor3.mako
2018-11-10 14:47:25,226 use template gen_winding.mako
2018-11-10 14:47:25,227 use template magnetSector.mako
2018-11-10 14:47:25,228 use template cu_losses.mako
2018-11-10 14:47:25,228 use template pm_sym_fast.mako
2018-11-10 14:47:25,229 use template plots.mako
2018-11-10 14:47:25,232 Prepare: stator.statorRotor3.slot_width = 0.008
2018-11-10 14:47:25,232 Prepare: magnet.magnetSector.magn_width_pct = 0.85
2018-11-10 14:47:25,233 Prepare: magnet.magnetSector.magn_shape = 0.02875
2018-11-10 14:47:25,233 prepare [0.008 0.85 0.02875]
2018-11-10 14:47:25,234 use template new_model.mako
2018-11-10 14:47:25,235 use template cu_losses.mako
2018-11-10 14:47:25,236 use template statorRotor3.mako
2018-11-10 14:47:25,237 use template gen_winding.mako
2018-11-10 14:47:25,238 use template magnetSector.mako
2018-11-10 14:47:25,239 use template cu_losses.mako
2018-11-10 14:47:25,240 use template pm_sym_fast.mako
2018-11-10 14:47:25,241 use template plots.mako
2018-11-10 14:47:25,244 Prepare: stator.statorRotor3.slot_width = 0.003
2018-11-10 14:47:25,245 Prepare: magnet.magnetSector.magn_width_pct = 0.72
2018-11-10 14:47:25,245 Prepare: magnet.magnetSector.magn_shape = 0.031125
2018-11-10 14:47:25,246 prepare [0.003 0.72 0.031125]
2018-11-10 14:47:25,247 use template new_model.mako
2018-11-10 14:47:25,248 use template cu_losses.mako
2018-11-10 14:47:25,249 use template statorRotor3.mako
2018-11-10 14:47:25,251 use template gen_winding.mako
2018-11-10 14:47:25,252 use template magnetSector.mako
2018-11-10 14:47:25,253 use template cu_losses.mako
2018-11-10 14:47:25,254 use template pm_sym_fast.mako
2018-11-10 14:47:25,255 use template plots.mako
2018-11-10 14:47:25,258 Prepare: stator.statorRotor3.slot_width = 0.00425
2018-11-10 14:47:25,259 Prepare: magnet.magnetSector.magn_width_pct = 0.72
2018-11-10 14:47:25,261 Prepare: magnet.magnetSector.magn_shape = 0.031125
2018-11-10 14:47:25,262 prepare [0.00425 0.72 0.031125]
2018-11-10 14:47:25,264 use template new_model.mako
2018-11-10 14:47:25,266 use template cu_losses.mako
2018-11-10 14:47:25,267 use template statorRotor3.mako
2018-11-10 14:47:25,268 use template gen_winding.mako
2018-11-10 14:47:25,269 use template magnetSector.mako
2018-11-10 14:47:25,270 use template cu_losses.mako
2018-11-10 14:47:25,271 use template pm_sym_fast.mako
2018-11-10 14:47:25,272 use template plots.mako
2018-11-10 14:47:25,275 Prepare: stator.statorRotor3.slot_width = 0.0055
2018-11-10 14:47:25,276 Prepare: magnet.magnetSector.magn_width_pct = 0.72
2018-11-10 14:47:25,276 Prepare: magnet.magnetSector.magn_shape = 0.031125
2018-11-10 14:47:25,277 prepare [0.0055 0.72 0.031125]
2018-11-10 14:47:25,278 use template new_model.mako
2018-11-10 14:47:25,280 use template cu_losses.mako
2018-11-10 14:47:25,280 use template statorRotor3.mako
2018-11-10 14:47:25,282 use template gen_winding.mako
2018-11-10 14:47:25,283 use template magnetSector.mako
2018-11-10 14:47:25,283 use template cu_losses.mako
2018-11-10 14:47:25,285 use template pm_sym_fast.mako
2018-11-10 14:47:25,286 use template plots.mako
2018-11-10 14:47:25,289 Prepare: stator.statorRotor3.slot_width = 0.00675
2018-11-10 14:47:25,290 Prepare: magnet.magnetSector.magn_width_pct = 0.72
2018-11-10 14:47:25,290 Prepare: magnet.magnetSector.magn_shape = 0.031125
2018-11-10 14:47:25,291 prepare [0.00675 0.72 0.031125]
2018-11-10 14:47:25,292 use template new_model.mako
2018-11-10 14:47:25,299 use template cu_losses.mako
2018-11-10 14:47:25,301 use template statorRotor3.mako
2018-11-10 14:47:25,302 use template gen_winding.mako
2018-11-10 14:47:25,306 use template magnetSector.mako
2018-11-10 14:47:25,310 use template cu_losses.mako
2018-11-10 14:47:25,312 use template pm_sym_fast.mako
2018-11-10 14:47:25,314 use template plots.mako
2018-11-10 14:47:25,316 Prepare: stator.statorRotor3.slot_width = 0.008
2018-11-10 14:47:25,317 Prepare: magnet.magnetSector.magn_width_pct = 0.72
2018-11-10 14:47:25,320 Prepare: magnet.magnetSector.magn_shape = 0.031125
2018-11-10 14:47:25,321 prepare [0.008 0.72 0.031125]
2018-11-10 14:47:25,324 use template new_model.mako
2018-11-10 14:47:25,332 use template cu_losses.mako
2018-11-10 14:47:25,334 use template statorRotor3.mako
2018-11-10 14:47:25,335 use template gen_winding.mako
2018-11-10 14:47:25,336 use template magnetSector.mako
2018-11-10 14:47:25,337 use template cu_losses.mako
2018-11-10 14:47:25,338 use template pm_sym_fast.mako
2018-11-10 14:47:25,339 use template plots.mako
2018-11-10 14:47:25,344 Prepare: stator.statorRotor3.slot_width = 0.003
2018-11-10 14:47:25,345 Prepare: magnet.magnetSector.magn_width_pct = 0.7525
2018-11-10 14:47:25,346 Prepare: magnet.magnetSector.magn_shape = 0.031125
2018-11-10 14:47:25,347 prepare [0.003 0.7525 0.031125]
2018-11-10 14:47:25,348 use template new_model.mako
2018-11-10 14:47:25,349 use template cu_losses.mako
2018-11-10 14:47:25,350 use template statorRotor3.mako
2018-11-10 14:47:25,351 use template gen_winding.mako
2018-11-10 14:47:25,354 use template magnetSector.mako
2018-11-10 14:47:25,355 use template cu_losses.mako
2018-11-10 14:47:25,356 use template pm_sym_fast.mako
2018-11-10 14:47:25,358 use template plots.mako
2018-11-10 14:47:25,361 Prepare: stator.statorRotor3.slot_width = 0.00425
2018-11-10 14:47:25,362 Prepare: magnet.magnetSector.magn_width_pct = 0.7525
2018-11-10 14:47:25,362 Prepare: magnet.magnetSector.magn_shape = 0.031125
2018-11-10 14:47:25,363 prepare [0.00425 0.7525 0.031125]
2018-11-10 14:47:25,364 use template new_model.mako
2018-11-10 14:47:25,365 use template cu_losses.mako
2018-11-10 14:47:25,366 use template statorRotor3.mako
2018-11-10 14:47:25,367 use template gen_winding.mako
2018-11-10 14:47:25,368 use template magnetSector.mako
2018-11-10 14:47:25,369 use template cu_losses.mako
2018-11-10 14:47:25,371 use template pm_sym_fast.mako
2018-11-10 14:47:25,372 use template plots.mako
2018-11-10 14:47:25,376 Prepare: stator.statorRotor3.slot_width = 0.0055
2018-11-10 14:47:25,377 Prepare: magnet.magnetSector.magn_width_pct = 0.7525
2018-11-10 14:47:25,377 Prepare: magnet.magnetSector.magn_shape = 0.031125
2018-11-10 14:47:25,378 prepare [0.0055 0.7525 0.031125]
2018-11-10 14:47:25,379 use template new_model.mako
2018-11-10 14:47:25,381 use template cu_losses.mako
2018-11-10 14:47:25,383 use template statorRotor3.mako
2018-11-10 14:47:25,386 use template gen_winding.mako
2018-11-10 14:47:25,387 use template magnetSector.mako
2018-11-10 14:47:25,389 use template cu_losses.mako
2018-11-10 14:47:25,390 use template pm_sym_fast.mako
2018-11-10 14:47:25,391 use template plots.mako
2018-11-10 14:47:25,397 Prepare: stator.statorRotor3.slot_width = 0.00675
2018-11-10 14:47:25,398 Prepare: magnet.magnetSector.magn_width_pct = 0.7525
2018-11-10 14:47:25,400 Prepare: magnet.magnetSector.magn_shape = 0.031125
2018-11-10 14:47:25,400 prepare [0.00675 0.7525 0.031125]
2018-11-10 14:47:25,403 use template new_model.mako
2018-11-10 14:47:25,405 use template cu_losses.mako
2018-11-10 14:47:25,406 use template statorRotor3.mako
2018-11-10 14:47:25,407 use template gen_winding.mako
2018-11-10 14:47:25,408 use template magnetSector.mako
2018-11-10 14:47:25,409 use template cu_losses.mako
2018-11-10 14:47:25,411 use template pm_sym_fast.mako
2018-11-10 14:47:25,412 use template plots.mako
2018-11-10 14:47:25,417 Prepare: stator.statorRotor3.slot_width = 0.008
2018-11-10 14:47:25,426 Prepare: magnet.magnetSector.magn_width_pct = 0.7525
2018-11-10 14:47:25,427 Prepare: magnet.magnetSector.magn_shape = 0.031125
2018-11-10 14:47:25,428 prepare [0.008 0.7525 0.031125]
2018-11-10 14:47:25,430 use template new_model.mako
2018-11-10 14:47:25,431 use template cu_losses.mako
2018-11-10 14:47:25,432 use template statorRotor3.mako
2018-11-10 14:47:25,433 use template gen_winding.mako
2018-11-10 14:47:25,434 use template magnetSector.mako
2018-11-10 14:47:25,435 use template cu_losses.mako
2018-11-10 14:47:25,436 use template pm_sym_fast.mako
2018-11-10 14:47:25,437 use template plots.mako
2018-11-10 14:47:25,465 Started 172018-11-10 14:47:25,466 FEMAG /home/tar/parvar2/0: femag.fsl
2018-11-10 14:47:25,468 FEMAG /home/tar/parvar2/1: femag.fsl
2018-11-10 14:47:25,472 FEMAG /home/tar/parvar2/2: femag.fsl
2018-11-10 14:47:25,475 FEMAG /home/tar/parvar2/3: femag.fsl
2018-11-10 14:47:47,919 Finished pid: 16642 return 0
2018-11-10 14:47:47,921 FEMAG /home/tar/parvar2/4: femag.fsl
2018-11-10 14:47:48,421 Finished pid: 16639 return 0
2018-11-10 14:47:48,423 FEMAG /home/tar/parvar2/5: femag.fsl
2018-11-10 14:47:48,433 Finished pid: 16635 return 0
2018-11-10 14:47:48,435 FEMAG /home/tar/parvar2/6: femag.fsl
2018-11-10 14:47:48,702 Finished pid: 16638 return 0
2018-11-10 14:47:48,704 FEMAG /home/tar/parvar2/7: femag.fsl
2018-11-10 14:48:10,346 Finished pid: 16671 return 0
2018-11-10 14:48:10,347 FEMAG /home/tar/parvar2/8: femag.fsl
2018-11-10 14:48:10,694 Finished pid: 16656 return 0
2018-11-10 14:48:10,696 FEMAG /home/tar/parvar2/9: femag.fsl
2018-11-10 14:48:11,114 Finished pid: 16661 return 0
2018-11-10 14:48:11,117 FEMAG /home/tar/parvar2/10: femag.fsl
2018-11-10 14:48:11,536 Finished pid: 16666 return 0
2018-11-10 14:48:11,538 FEMAG /home/tar/parvar2/11: femag.fsl
2018-11-10 14:48:31,783 Finished pid: 16683 return 0
2018-11-10 14:48:31,788 FEMAG /home/tar/parvar2/12: femag.fsl
2018-11-10 14:48:31,982 Finished pid: 16688 return 0
2018-11-10 14:48:31,988 FEMAG /home/tar/parvar2/13: femag.fsl
2018-11-10 14:48:33,004 Finished pid: 16693 return 0
2018-11-10 14:48:33,010 FEMAG /home/tar/parvar2/14: femag.fsl
2018-11-10 14:48:33,622 Finished pid: 16698 return 0
2018-11-10 14:48:33,624 FEMAG /home/tar/parvar2/15: femag.fsl
2018-11-10 14:48:53,283 Finished pid: 16707 return 0
2018-11-10 14:48:53,289 FEMAG /home/tar/parvar2/16: femag.fsl
2018-11-10 14:48:53,563 Finished pid: 16712 return 0
2018-11-10 14:48:54,333 Finished pid: 16717 return 0
2018-11-10 14:48:55,173 Finished pid: 16722 return 0
2018-11-10 14:49:05,984 Finished pid: 16734 return 0
2018-11-10 14:49:05,986 Reading /home/tar/parvar2/0/PM-4-130_001.BATCH
2018-11-10 14:49:05,993 Reading /home/tar/parvar2/1/PM-4-130_001.BATCH
2018-11-10 14:49:06,001 Reading /home/tar/parvar2/2/PM-4-130_001.BATCH
2018-11-10 14:49:06,008 Reading /home/tar/parvar2/3/PM-4-130_001.BATCH
2018-11-10 14:49:06,014 Reading /home/tar/parvar2/4/PM-4-130_001.BATCH
2018-11-10 14:49:06,022 Reading /home/tar/parvar2/5/PM-4-130_001.BATCH
2018-11-10 14:49:06,028 Reading /home/tar/parvar2/6/PM-4-130_001.BATCH
2018-11-10 14:49:06,036 Reading /home/tar/parvar2/7/PM-4-130_001.BATCH
2018-11-10 14:49:06,046 Reading /home/tar/parvar2/8/PM-4-130_001.BATCH
2018-11-10 14:49:06,055 Reading /home/tar/parvar2/9/PM-4-130_001.BATCH
2018-11-10 14:49:06,061 Reading /home/tar/parvar2/10/PM-4-130_001.BATCH
2018-11-10 14:49:06,069 Reading /home/tar/parvar2/11/PM-4-130_001.BATCH
2018-11-10 14:49:06,077 Reading /home/tar/parvar2/12/PM-4-130_001.BATCH
2018-11-10 14:49:06,084 Reading /home/tar/parvar2/13/PM-4-130_001.BATCH
2018-11-10 14:49:06,091 Reading /home/tar/parvar2/14/PM-4-130_001.BATCH
2018-11-10 14:49:06,100 Reading /home/tar/parvar2/15/PM-4-130_001.BATCH
2018-11-10 14:49:06,107 Reading /home/tar/parvar2/16/PM-4-130_001.BATCH
2018-11-10 14:49:06,113 ........ 6 / 7
2018-11-10 14:49:06,114 rm /home/tar/parvar2/0
2018-11-10 14:49:06,119 rm /home/tar/parvar2/1
2018-11-10 14:49:06,124 rm /home/tar/parvar2/2
2018-11-10 14:49:06,128 rm /home/tar/parvar2/3
2018-11-10 14:49:06,133 rm /home/tar/parvar2/4
2018-11-10 14:49:06,138 rm /home/tar/parvar2/5
2018-11-10 14:49:06,144 rm /home/tar/parvar2/6
2018-11-10 14:49:06,148 rm /home/tar/parvar2/7
2018-11-10 14:49:06,154 rm /home/tar/parvar2/8
2018-11-10 14:49:06,159 rm /home/tar/parvar2/9
2018-11-10 14:49:06,164 rm /home/tar/parvar2/10
2018-11-10 14:49:06,169 rm /home/tar/parvar2/11
2018-11-10 14:49:06,174 rm /home/tar/parvar2/12
2018-11-10 14:49:06,180 rm /home/tar/parvar2/13
2018-11-10 14:49:06,185 rm /home/tar/parvar2/14
2018-11-10 14:49:06,191 rm /home/tar/parvar2/15
2018-11-10 14:49:06,196 rm /home/tar/parvar2/16
2018-11-10 14:49:06,202 Prepare: stator.statorRotor3.slot_width = 0.003
2018-11-10 14:49:06,203 Prepare: magnet.magnetSector.magn_width_pct = 0.7849999999999999
2018-11-10 14:49:06,203 Prepare: magnet.magnetSector.magn_shape = 0.031125
2018-11-10 14:49:06,204 prepare [0.003 0.785 0.031125]
2018-11-10 14:49:06,206 use template new_model.mako
2018-11-10 14:49:06,208 use template cu_losses.mako
2018-11-10 14:49:06,209 use template statorRotor3.mako
2018-11-10 14:49:06,210 use template gen_winding.mako
2018-11-10 14:49:06,211 use template magnetSector.mako
2018-11-10 14:49:06,212 use template cu_losses.mako
2018-11-10 14:49:06,213 use template pm_sym_fast.mako
2018-11-10 14:49:06,215 use template plots.mako
2018-11-10 14:49:06,219 Prepare: stator.statorRotor3.slot_width = 0.00425
2018-11-10 14:49:06,219 Prepare: magnet.magnetSector.magn_width_pct = 0.7849999999999999
2018-11-10 14:49:06,220 Prepare: magnet.magnetSector.magn_shape = 0.031125
2018-11-10 14:49:06,221 prepare [0.00425 0.785 0.031125]
2018-11-10 14:49:06,222 use template new_model.mako
2018-11-10 14:49:06,224 use template cu_losses.mako
2018-11-10 14:49:06,225 use template statorRotor3.mako
2018-11-10 14:49:06,226 use template gen_winding.mako
2018-11-10 14:49:06,226 use template magnetSector.mako
2018-11-10 14:49:06,228 use template cu_losses.mako
2018-11-10 14:49:06,229 use template pm_sym_fast.mako
2018-11-10 14:49:06,230 use template plots.mako
2018-11-10 14:49:06,232 Prepare: stator.statorRotor3.slot_width = 0.0055
2018-11-10 14:49:06,233 Prepare: magnet.magnetSector.magn_width_pct = 0.7849999999999999
2018-11-10 14:49:06,235 Prepare: magnet.magnetSector.magn_shape = 0.031125
2018-11-10 14:49:06,236 prepare [0.0055 0.785 0.031125]
2018-11-10 14:49:06,239 use template new_model.mako
2018-11-10 14:49:06,243 use template cu_losses.mako
2018-11-10 14:49:06,244 use template statorRotor3.mako
2018-11-10 14:49:06,245 use template gen_winding.mako
2018-11-10 14:49:06,246 use template magnetSector.mako
2018-11-10 14:49:06,247 use template cu_losses.mako
2018-11-10 14:49:06,248 use template pm_sym_fast.mako
2018-11-10 14:49:06,249 use template plots.mako
2018-11-10 14:49:06,252 Prepare: stator.statorRotor3.slot_width = 0.00675
2018-11-10 14:49:06,252 Prepare: magnet.magnetSector.magn_width_pct = 0.7849999999999999
2018-11-10 14:49:06,253 Prepare: magnet.magnetSector.magn_shape = 0.031125
2018-11-10 14:49:06,253 prepare [0.00675 0.785 0.031125]
2018-11-10 14:49:06,255 use template new_model.mako
2018-11-10 14:49:06,256 use template cu_losses.mako
2018-11-10 14:49:06,257 use template statorRotor3.mako
2018-11-10 14:49:06,258 use template gen_winding.mako
2018-11-10 14:49:06,260 use template magnetSector.mako
2018-11-10 14:49:06,262 use template cu_losses.mako
2018-11-10 14:49:06,263 use template pm_sym_fast.mako
2018-11-10 14:49:06,266 use template plots.mako
2018-11-10 14:49:06,270 Prepare: stator.statorRotor3.slot_width = 0.008
2018-11-10 14:49:06,271 Prepare: magnet.magnetSector.magn_width_pct = 0.7849999999999999
2018-11-10 14:49:06,273 Prepare: magnet.magnetSector.magn_shape = 0.031125
2018-11-10 14:49:06,273 prepare [0.008 0.785 0.031125]
2018-11-10 14:49:06,275 use template new_model.mako
2018-11-10 14:49:06,276 use template cu_losses.mako
2018-11-10 14:49:06,278 use template statorRotor3.mako
2018-11-10 14:49:06,279 use template gen_winding.mako
2018-11-10 14:49:06,280 use template magnetSector.mako
2018-11-10 14:49:06,281 use template cu_losses.mako
2018-11-10 14:49:06,282 use template pm_sym_fast.mako
2018-11-10 14:49:06,283 use template plots.mako
2018-11-10 14:49:06,285 Prepare: stator.statorRotor3.slot_width = 0.003
2018-11-10 14:49:06,286 Prepare: magnet.magnetSector.magn_width_pct = 0.8175
2018-11-10 14:49:06,287 Prepare: magnet.magnetSector.magn_shape = 0.031125
2018-11-10 14:49:06,288 prepare [0.003 0.8175 0.031125]
2018-11-10 14:49:06,289 use template new_model.mako
2018-11-10 14:49:06,290 use template cu_losses.mako
2018-11-10 14:49:06,291 use template statorRotor3.mako
2018-11-10 14:49:06,292 use template gen_winding.mako
2018-11-10 14:49:06,294 use template magnetSector.mako
2018-11-10 14:49:06,295 use template cu_losses.mako
2018-11-10 14:49:06,296 use template pm_sym_fast.mako
2018-11-10 14:49:06,297 use template plots.mako
2018-11-10 14:49:06,300 Prepare: stator.statorRotor3.slot_width = 0.00425
2018-11-10 14:49:06,301 Prepare: magnet.magnetSector.magn_width_pct = 0.8175
2018-11-10 14:49:06,302 Prepare: magnet.magnetSector.magn_shape = 0.031125
2018-11-10 14:49:06,302 prepare [0.00425 0.8175 0.031125]
2018-11-10 14:49:06,303 use template new_model.mako
2018-11-10 14:49:06,305 use template cu_losses.mako
2018-11-10 14:49:06,306 use template statorRotor3.mako
2018-11-10 14:49:06,308 use template gen_winding.mako
2018-11-10 14:49:06,311 use template magnetSector.mako
2018-11-10 14:49:06,313 use template cu_losses.mako
2018-11-10 14:49:06,315 use template pm_sym_fast.mako
2018-11-10 14:49:06,316 use template plots.mako
2018-11-10 14:49:06,320 Prepare: stator.statorRotor3.slot_width = 0.0055
2018-11-10 14:49:06,321 Prepare: magnet.magnetSector.magn_width_pct = 0.8175
2018-11-10 14:49:06,321 Prepare: magnet.magnetSector.magn_shape = 0.031125
2018-11-10 14:49:06,322 prepare [0.0055 0.8175 0.031125]
2018-11-10 14:49:06,324 use template new_model.mako
2018-11-10 14:49:06,326 use template cu_losses.mako
2018-11-10 14:49:06,327 use template statorRotor3.mako
2018-11-10 14:49:06,328 use template gen_winding.mako
2018-11-10 14:49:06,329 use template magnetSector.mako
2018-11-10 14:49:06,331 use template cu_losses.mako
2018-11-10 14:49:06,333 use template pm_sym_fast.mako
2018-11-10 14:49:06,334 use template plots.mako
2018-11-10 14:49:06,338 Prepare: stator.statorRotor3.slot_width = 0.00675
2018-11-10 14:49:06,338 Prepare: magnet.magnetSector.magn_width_pct = 0.8175
2018-11-10 14:49:06,339 Prepare: magnet.magnetSector.magn_shape = 0.031125
2018-11-10 14:49:06,340 prepare [0.00675 0.8175 0.031125]
2018-11-10 14:49:06,341 use template new_model.mako
2018-11-10 14:49:06,343 use template cu_losses.mako
2018-11-10 14:49:06,344 use template statorRotor3.mako
2018-11-10 14:49:06,345 use template gen_winding.mako
2018-11-10 14:49:06,347 use template magnetSector.mako
2018-11-10 14:49:06,349 use template cu_losses.mako
2018-11-10 14:49:06,350 use template pm_sym_fast.mako
2018-11-10 14:49:06,351 use template plots.mako
2018-11-10 14:49:06,356 Prepare: stator.statorRotor3.slot_width = 0.008
2018-11-10 14:49:06,357 Prepare: magnet.magnetSector.magn_width_pct = 0.8175
2018-11-10 14:49:06,358 Prepare: magnet.magnetSector.magn_shape = 0.031125
2018-11-10 14:49:06,358 prepare [0.008 0.8175 0.031125]
2018-11-10 14:49:06,361 use template new_model.mako
2018-11-10 14:49:06,364 use template cu_losses.mako
2018-11-10 14:49:06,365 use template statorRotor3.mako
2018-11-10 14:49:06,367 use template gen_winding.mako
2018-11-10 14:49:06,368 use template magnetSector.mako
2018-11-10 14:49:06,369 use template cu_losses.mako
2018-11-10 14:49:06,370 use template pm_sym_fast.mako
2018-11-10 14:49:06,371 use template plots.mako
2018-11-10 14:49:06,376 Prepare: stator.statorRotor3.slot_width = 0.003
2018-11-10 14:49:06,377 Prepare: magnet.magnetSector.magn_width_pct = 0.85
2018-11-10 14:49:06,377 Prepare: magnet.magnetSector.magn_shape = 0.031125
2018-11-10 14:49:06,378 prepare [0.003 0.85 0.031125]
2018-11-10 14:49:06,379 use template new_model.mako
2018-11-10 14:49:06,380 use template cu_losses.mako
2018-11-10 14:49:06,382 use template statorRotor3.mako
2018-11-10 14:49:06,383 use template gen_winding.mako
2018-11-10 14:49:06,384 use template magnetSector.mako
2018-11-10 14:49:06,385 use template cu_losses.mako
2018-11-10 14:49:06,386 use template pm_sym_fast.mako
2018-11-10 14:49:06,387 use template plots.mako
2018-11-10 14:49:06,391 Prepare: stator.statorRotor3.slot_width = 0.00425
2018-11-10 14:49:06,391 Prepare: magnet.magnetSector.magn_width_pct = 0.85
2018-11-10 14:49:06,392 Prepare: magnet.magnetSector.magn_shape = 0.031125
2018-11-10 14:49:06,393 prepare [0.00425 0.85 0.031125]
2018-11-10 14:49:06,394 use template new_model.mako
2018-11-10 14:49:06,396 use template cu_losses.mako
2018-11-10 14:49:06,397 use template statorRotor3.mako
2018-11-10 14:49:06,398 use template gen_winding.mako
2018-11-10 14:49:06,399 use template magnetSector.mako
2018-11-10 14:49:06,400 use template cu_losses.mako
2018-11-10 14:49:06,401 use template pm_sym_fast.mako
2018-11-10 14:49:06,445 use template plots.mako
2018-11-10 14:49:06,448 Prepare: stator.statorRotor3.slot_width = 0.0055
2018-11-10 14:49:06,449 Prepare: magnet.magnetSector.magn_width_pct = 0.85
2018-11-10 14:49:06,449 Prepare: magnet.magnetSector.magn_shape = 0.031125
2018-11-10 14:49:06,450 prepare [0.0055 0.85 0.031125]
2018-11-10 14:49:06,452 use template new_model.mako
2018-11-10 14:49:06,453 use template cu_losses.mako
2018-11-10 14:49:06,455 use template statorRotor3.mako
2018-11-10 14:49:06,456 use template gen_winding.mako
2018-11-10 14:49:06,457 use template magnetSector.mako
2018-11-10 14:49:06,458 use template cu_losses.mako
2018-11-10 14:49:06,458 use template pm_sym_fast.mako
2018-11-10 14:49:06,460 use template plots.mako
2018-11-10 14:49:06,463 Prepare: stator.statorRotor3.slot_width = 0.00675
2018-11-10 14:49:06,464 Prepare: magnet.magnetSector.magn_width_pct = 0.85
2018-11-10 14:49:06,464 Prepare: magnet.magnetSector.magn_shape = 0.031125
2018-11-10 14:49:06,465 prepare [0.00675 0.85 0.031125]
2018-11-10 14:49:06,466 use template new_model.mako
2018-11-10 14:49:06,467 use template cu_losses.mako
2018-11-10 14:49:06,468 use template statorRotor3.mako
2018-11-10 14:49:06,469 use template gen_winding.mako
2018-11-10 14:49:06,470 use template magnetSector.mako
2018-11-10 14:49:06,471 use template cu_losses.mako
2018-11-10 14:49:06,473 use template pm_sym_fast.mako
2018-11-10 14:49:06,474 use template plots.mako
2018-11-10 14:49:06,477 Prepare: stator.statorRotor3.slot_width = 0.008
2018-11-10 14:49:06,477 Prepare: magnet.magnetSector.magn_width_pct = 0.85
2018-11-10 14:49:06,478 Prepare: magnet.magnetSector.magn_shape = 0.031125
2018-11-10 14:49:06,478 prepare [0.008 0.85 0.031125]
2018-11-10 14:49:06,482 use template new_model.mako
2018-11-10 14:49:06,483 use template cu_losses.mako
2018-11-10 14:49:06,484 use template statorRotor3.mako
2018-11-10 14:49:06,485 use template gen_winding.mako
2018-11-10 14:49:06,486 use template magnetSector.mako
2018-11-10 14:49:06,487 use template cu_losses.mako
2018-11-10 14:49:06,488 use template pm_sym_fast.mako
2018-11-10 14:49:06,489 use template plots.mako
2018-11-10 14:49:06,492 Prepare: stator.statorRotor3.slot_width = 0.003
2018-11-10 14:49:06,493 Prepare: magnet.magnetSector.magn_width_pct = 0.72
2018-11-10 14:49:06,493 Prepare: magnet.magnetSector.magn_shape = 0.0335
2018-11-10 14:49:06,494 prepare [0.003 0.72 0.0335]
2018-11-10 14:49:06,495 use template new_model.mako
2018-11-10 14:49:06,497 use template cu_losses.mako
2018-11-10 14:49:06,498 use template statorRotor3.mako
2018-11-10 14:49:06,500 use template gen_winding.mako
2018-11-10 14:49:06,501 use template magnetSector.mako
2018-11-10 14:49:06,502 use template cu_losses.mako
2018-11-10 14:49:06,503 use template pm_sym_fast.mako
2018-11-10 14:49:06,504 use template plots.mako
2018-11-10 14:49:06,506 Prepare: stator.statorRotor3.slot_width = 0.00425
2018-11-10 14:49:06,508 Prepare: magnet.magnetSector.magn_width_pct = 0.72
2018-11-10 14:49:06,509 Prepare: magnet.magnetSector.magn_shape = 0.0335
2018-11-10 14:49:06,510 prepare [0.00425 0.72 0.0335 ]
2018-11-10 14:49:06,511 use template new_model.mako
2018-11-10 14:49:06,512 use template cu_losses.mako
2018-11-10 14:49:06,514 use template statorRotor3.mako
2018-11-10 14:49:06,514 use template gen_winding.mako
2018-11-10 14:49:06,515 use template magnetSector.mako
2018-11-10 14:49:06,516 use template cu_losses.mako
2018-11-10 14:49:06,518 use template pm_sym_fast.mako
2018-11-10 14:49:06,519 use template plots.mako
2018-11-10 14:49:06,545 Started 17
2018-11-10 14:49:06,546 FEMAG /home/tar/parvar2/1: femag.fsl
2018-11-10 14:49:06,546 FEMAG /home/tar/parvar2/0: femag.fsl
2018-11-10 14:49:06,548 FEMAG /home/tar/parvar2/2: femag.fsl
2018-11-10 14:49:06,550 FEMAG /home/tar/parvar2/3: femag.fsl
2018-11-10 14:49:28,497 Finished pid: 16765 return 0
2018-11-10 14:49:28,499 FEMAG /home/tar/parvar2/4: femag.fsl
2018-11-10 14:49:28,508 Finished pid: 16763 return 0
2018-11-10 14:49:28,510 FEMAG /home/tar/parvar2/5: femag.fsl
2018-11-10 14:49:28,533 Finished pid: 16766 return 0
2018-11-10 14:49:28,536 FEMAG /home/tar/parvar2/6: femag.fsl
2018-11-10 14:49:28,829 Finished pid: 16764 return 0
2018-11-10 14:49:28,831 FEMAG /home/tar/parvar2/7: femag.fsl
2018-11-10 14:49:50,352 Finished pid: 16786 return 0
2018-11-10 14:49:50,357 FEMAG /home/tar/parvar2/8: femag.fsl
2018-11-10 14:49:50,508 Finished pid: 16781 return 0
2018-11-10 14:49:50,510 FEMAG /home/tar/parvar2/9: femag.fsl
2018-11-10 14:49:50,780 Finished pid: 16791 return 0
2018-11-10 14:49:50,782 FEMAG /home/tar/parvar2/10: femag.fsl
2018-11-10 14:49:51,132 Finished pid: 16776 return 0
2018-11-10 14:49:51,134 FEMAG /home/tar/parvar2/11: femag.fsl
2018-11-10 14:50:12,397 Finished pid: 16806 return 0
2018-11-10 14:50:12,403 FEMAG /home/tar/parvar2/12: femag.fsl
2018-11-10 14:50:12,970 Finished pid: 16816 return 0
2018-11-10 14:50:12,975 FEMAG /home/tar/parvar2/13: femag.fsl
2018-11-10 14:50:13,092 Finished pid: 16811 return 0
2018-11-10 14:50:13,095 FEMAG /home/tar/parvar2/14: femag.fsl
2018-11-10 14:50:13,326 Finished pid: 16821 return 0
2018-11-10 14:50:13,328 FEMAG /home/tar/parvar2/15: femag.fsl
2018-11-10 14:50:34,335 Finished pid: 16831 return 0
2018-11-10 14:50:34,337 FEMAG /home/tar/parvar2/16: femag.fsl
2018-11-10 14:50:34,668 Finished pid: 16846 return 0
2018-11-10 14:50:35,284 Finished pid: 16836 return 0
2018-11-10 14:50:35,329 Finished pid: 16841 return 0
2018-11-10 14:50:46,554 Finished pid: 16856 return 0
2018-11-10 14:50:46,556 Reading /home/tar/parvar2/0/PM-4-130_001.BATCH
2018-11-10 14:50:46,564 Reading /home/tar/parvar2/1/PM-4-130_001.BATCH
2018-11-10 14:50:46,571 Reading /home/tar/parvar2/2/PM-4-130_001.BATCH
2018-11-10 14:50:46,578 Reading /home/tar/parvar2/3/PM-4-130_001.BATCH
2018-11-10 14:50:46,586 Reading /home/tar/parvar2/4/PM-4-130_001.BATCH
2018-11-10 14:50:46,593 Reading /home/tar/parvar2/5/PM-4-130_001.BATCH
2018-11-10 14:50:46,601 Reading /home/tar/parvar2/6/PM-4-130_001.BATCH
2018-11-10 14:50:46,609 Reading /home/tar/parvar2/7/PM-4-130_001.BATCH
2018-11-10 14:50:46,616 Reading /home/tar/parvar2/8/PM-4-130_001.BATCH
2018-11-10 14:50:46,626 Reading /home/tar/parvar2/9/PM-4-130_001.BATCH
2018-11-10 14:50:46,634 Reading /home/tar/parvar2/10/PM-4-130_001.BATCH
2018-11-10 14:50:46,641 Reading /home/tar/parvar2/11/PM-4-130_001.BATCH
2018-11-10 14:50:46,650 Reading /home/tar/parvar2/12/PM-4-130_001.BATCH
2018-11-10 14:50:46,657 Reading /home/tar/parvar2/13/PM-4-130_001.BATCH
2018-11-10 14:50:46,664 Reading /home/tar/parvar2/14/PM-4-130_001.BATCH
2018-11-10 14:50:46,672 Reading /home/tar/parvar2/15/PM-4-130_001.BATCH
2018-11-10 14:50:46,680 Reading /home/tar/parvar2/16/PM-4-130_001.BATCH
2018-11-10 14:50:46,686 ........ 7 / 7
2018-11-10 14:50:46,686 rm /home/tar/parvar2/0
2018-11-10 14:50:46,692 rm /home/tar/parvar2/1
2018-11-10 14:50:46,697 rm /home/tar/parvar2/2
2018-11-10 14:50:46,702 rm /home/tar/parvar2/3
2018-11-10 14:50:46,707 rm /home/tar/parvar2/4
2018-11-10 14:50:46,712 rm /home/tar/parvar2/5
2018-11-10 14:50:46,717 rm /home/tar/parvar2/6
2018-11-10 14:50:46,722 rm /home/tar/parvar2/7
2018-11-10 14:50:46,727 rm /home/tar/parvar2/8
2018-11-10 14:50:46,732 rm /home/tar/parvar2/9
2018-11-10 14:50:46,737 rm /home/tar/parvar2/10
2018-11-10 14:50:46,743 rm /home/tar/parvar2/11
2018-11-10 14:50:46,749 rm /home/tar/parvar2/12
2018-11-10 14:50:46,754 rm /home/tar/parvar2/13
2018-11-10 14:50:46,759 rm /home/tar/parvar2/14
2018-11-10 14:50:46,763 rm /home/tar/parvar2/15
2018-11-10 14:50:46,768 rm /home/tar/parvar2/16
2018-11-10 14:50:46,800 Prepare: stator.statorRotor3.slot_width = 0.0055
2018-11-10 14:50:46,803 Prepare: magnet.magnetSector.magn_width_pct = 0.72
2018-11-10 14:50:46,805 Prepare: magnet.magnetSector.magn_shape = 0.0335
2018-11-10 14:50:46,809 prepare [0.0055 0.72 0.0335]
2018-11-10 14:50:46,816 use template new_model.mako
2018-11-10 14:50:46,825 use template cu_losses.mako
2018-11-10 14:50:46,831 use template statorRotor3.mako
2018-11-10 14:50:46,833 use template gen_winding.mako
2018-11-10 14:50:46,835 use template magnetSector.mako
2018-11-10 14:50:46,838 use template cu_losses.mako
2018-11-10 14:50:46,840 use template pm_sym_fast.mako
2018-11-10 14:50:46,843 use template plots.mako
2018-11-10 14:50:46,846 Prepare: stator.statorRotor3.slot_width = 0.00675
2018-11-10 14:50:46,847 Prepare: magnet.magnetSector.magn_width_pct = 0.72
2018-11-10 14:50:46,849 Prepare: magnet.magnetSector.magn_shape = 0.0335
2018-11-10 14:50:46,851 prepare [0.00675 0.72 0.0335 ]
2018-11-10 14:50:46,853 use template new_model.mako
2018-11-10 14:50:46,855 use template cu_losses.mako
2018-11-10 14:50:46,856 use template statorRotor3.mako
2018-11-10 14:50:46,857 use template gen_winding.mako
2018-11-10 14:50:46,859 use template magnetSector.mako
2018-11-10 14:50:46,860 use template cu_losses.mako
2018-11-10 14:50:46,861 use template pm_sym_fast.mako
2018-11-10 14:50:46,862 use template plots.mako
2018-11-10 14:50:46,866 Prepare: stator.statorRotor3.slot_width = 0.008
2018-11-10 14:50:46,867 Prepare: magnet.magnetSector.magn_width_pct = 0.72
2018-11-10 14:50:46,868 Prepare: magnet.magnetSector.magn_shape = 0.0335
2018-11-10 14:50:46,869 prepare [0.008 0.72 0.0335]
2018-11-10 14:50:46,870 use template new_model.mako
2018-11-10 14:50:46,872 use template cu_losses.mako
2018-11-10 14:50:46,873 use template statorRotor3.mako
2018-11-10 14:50:46,874 use template gen_winding.mako
2018-11-10 14:50:46,875 use template magnetSector.mako
2018-11-10 14:50:46,876 use template cu_losses.mako
2018-11-10 14:50:46,877 use template pm_sym_fast.mako
2018-11-10 14:50:46,878 use template plots.mako
2018-11-10 14:50:46,880 Prepare: stator.statorRotor3.slot_width = 0.003
2018-11-10 14:50:46,882 Prepare: magnet.magnetSector.magn_width_pct = 0.7525
2018-11-10 14:50:46,882 Prepare: magnet.magnetSector.magn_shape = 0.0335
2018-11-10 14:50:46,883 prepare [0.003 0.7525 0.0335]
2018-11-10 14:50:46,885 use template new_model.mako
2018-11-10 14:50:46,887 use template cu_losses.mako
2018-11-10 14:50:46,888 use template statorRotor3.mako
2018-11-10 14:50:46,889 use template gen_winding.mako
2018-11-10 14:50:46,890 use template magnetSector.mako
2018-11-10 14:50:46,891 use template cu_losses.mako
2018-11-10 14:50:46,892 use template pm_sym_fast.mako
2018-11-10 14:50:46,893 use template plots.mako
2018-11-10 14:50:46,896 Prepare: stator.statorRotor3.slot_width = 0.00425
2018-11-10 14:50:46,897 Prepare: magnet.magnetSector.magn_width_pct = 0.7525
2018-11-10 14:50:46,899 Prepare: magnet.magnetSector.magn_shape = 0.0335
2018-11-10 14:50:46,900 prepare [0.00425 0.7525 0.0335 ]
2018-11-10 14:50:46,902 use template new_model.mako
2018-11-10 14:50:46,905 use template cu_losses.mako
2018-11-10 14:50:46,905 use template statorRotor3.mako
2018-11-10 14:50:46,906 use template gen_winding.mako
2018-11-10 14:50:46,907 use template magnetSector.mako
2018-11-10 14:50:46,908 use template cu_losses.mako
2018-11-10 14:50:46,909 use template pm_sym_fast.mako
2018-11-10 14:50:46,910 use template plots.mako
2018-11-10 14:50:46,913 Prepare: stator.statorRotor3.slot_width = 0.0055
2018-11-10 14:50:46,914 Prepare: magnet.magnetSector.magn_width_pct = 0.7525
2018-11-10 14:50:46,915 Prepare: magnet.magnetSector.magn_shape = 0.0335
2018-11-10 14:50:46,916 prepare [0.0055 0.7525 0.0335]
2018-11-10 14:50:46,917 use template new_model.mako
2018-11-10 14:50:46,919 use template cu_losses.mako
2018-11-10 14:50:46,921 use template statorRotor3.mako
2018-11-10 14:50:46,922 use template gen_winding.mako
2018-11-10 14:50:46,924 use template magnetSector.mako
2018-11-10 14:50:46,926 use template cu_losses.mako
2018-11-10 14:50:46,927 use template pm_sym_fast.mako
2018-11-10 14:50:46,928 use template plots.mako
2018-11-10 14:50:46,932 Prepare: stator.statorRotor3.slot_width = 0.00675
2018-11-10 14:50:46,934 Prepare: magnet.magnetSector.magn_width_pct = 0.7525
2018-11-10 14:50:46,935 Prepare: magnet.magnetSector.magn_shape = 0.0335
2018-11-10 14:50:46,936 prepare [0.00675 0.7525 0.0335 ]
2018-11-10 14:50:46,942 use template new_model.mako
2018-11-10 14:50:46,943 use template cu_losses.mako
2018-11-10 14:50:46,945 use template statorRotor3.mako
2018-11-10 14:50:46,945 use template gen_winding.mako
2018-11-10 14:50:46,946 use template magnetSector.mako
2018-11-10 14:50:46,948 use template cu_losses.mako
2018-11-10 14:50:46,949 use template pm_sym_fast.mako
2018-11-10 14:50:46,951 use template plots.mako
2018-11-10 14:50:46,954 Prepare: stator.statorRotor3.slot_width = 0.008
2018-11-10 14:50:46,955 Prepare: magnet.magnetSector.magn_width_pct = 0.7525
2018-11-10 14:50:46,955 Prepare: magnet.magnetSector.magn_shape = 0.0335
2018-11-10 14:50:46,956 prepare [0.008 0.7525 0.0335]
2018-11-10 14:50:46,957 use template new_model.mako
2018-11-10 14:50:46,959 use template cu_losses.mako
2018-11-10 14:50:46,960 use template statorRotor3.mako
2018-11-10 14:50:46,961 use template gen_winding.mako
2018-11-10 14:50:46,962 use template magnetSector.mako
2018-11-10 14:50:46,963 use template cu_losses.mako
2018-11-10 14:50:46,964 use template pm_sym_fast.mako
2018-11-10 14:50:46,964 use template plots.mako
2018-11-10 14:50:46,967 Prepare: stator.statorRotor3.slot_width = 0.003
2018-11-10 14:50:46,968 Prepare: magnet.magnetSector.magn_width_pct = 0.7849999999999999
2018-11-10 14:50:46,968 Prepare: magnet.magnetSector.magn_shape = 0.0335
2018-11-10 14:50:46,969 prepare [0.003 0.785 0.0335]
2018-11-10 14:50:46,970 use template new_model.mako
2018-11-10 14:50:46,971 use template cu_losses.mako
2018-11-10 14:50:46,972 use template statorRotor3.mako
2018-11-10 14:50:46,973 use template gen_winding.mako
2018-11-10 14:50:46,974 use template magnetSector.mako
2018-11-10 14:50:46,975 use template cu_losses.mako
2018-11-10 14:50:46,976 use template pm_sym_fast.mako
2018-11-10 14:50:46,977 use template plots.mako
2018-11-10 14:50:46,980 Prepare: stator.statorRotor3.slot_width = 0.00425
2018-11-10 14:50:46,980 Prepare: magnet.magnetSector.magn_width_pct = 0.7849999999999999
2018-11-10 14:50:46,981 Prepare: magnet.magnetSector.magn_shape = 0.0335
2018-11-10 14:50:46,982 prepare [0.00425 0.785 0.0335 ]
2018-11-10 14:50:46,983 use template new_model.mako
2018-11-10 14:50:46,987 use template cu_losses.mako
2018-11-10 14:50:46,988 use template statorRotor3.mako
2018-11-10 14:50:46,989 use template gen_winding.mako
2018-11-10 14:50:46,990 use template magnetSector.mako
2018-11-10 14:50:46,991 use template cu_losses.mako
2018-11-10 14:50:46,992 use template pm_sym_fast.mako
2018-11-10 14:50:46,993 use template plots.mako
2018-11-10 14:50:46,996 Prepare: stator.statorRotor3.slot_width = 0.0055
2018-11-10 14:50:46,996 Prepare: magnet.magnetSector.magn_width_pct = 0.7849999999999999
2018-11-10 14:50:46,997 Prepare: magnet.magnetSector.magn_shape = 0.0335
2018-11-10 14:50:46,998 prepare [0.0055 0.785 0.0335]
2018-11-10 14:50:47,001 use template new_model.mako
2018-11-10 14:50:47,004 use template cu_losses.mako
2018-11-10 14:50:47,006 use template statorRotor3.mako
2018-11-10 14:50:47,007 use template gen_winding.mako
2018-11-10 14:50:47,008 use template magnetSector.mako
2018-11-10 14:50:47,010 use template cu_losses.mako
2018-11-10 14:50:47,011 use template pm_sym_fast.mako
2018-11-10 14:50:47,013 use template plots.mako
2018-11-10 14:50:47,019 Prepare: stator.statorRotor3.slot_width = 0.00675
2018-11-10 14:50:47,024 Prepare: magnet.magnetSector.magn_width_pct = 0.7849999999999999
2018-11-10 14:50:47,027 Prepare: magnet.magnetSector.magn_shape = 0.0335
2018-11-10 14:50:47,029 prepare [0.00675 0.785 0.0335 ]
2018-11-10 14:50:47,035 use template new_model.mako
2018-11-10 14:50:47,037 use template cu_losses.mako
2018-11-10 14:50:47,038 use template statorRotor3.mako
2018-11-10 14:50:47,042 use template gen_winding.mako
2018-11-10 14:50:47,043 use template magnetSector.mako
2018-11-10 14:50:47,044 use template cu_losses.mako
2018-11-10 14:50:47,046 use template pm_sym_fast.mako
2018-11-10 14:50:47,050 use template plots.mako
2018-11-10 14:50:47,055 Prepare: stator.statorRotor3.slot_width = 0.008
2018-11-10 14:50:47,058 Prepare: magnet.magnetSector.magn_width_pct = 0.7849999999999999
2018-11-10 14:50:47,060 Prepare: magnet.magnetSector.magn_shape = 0.0335
2018-11-10 14:50:47,061 prepare [0.008 0.785 0.0335]
2018-11-10 14:50:47,063 use template new_model.mako
2018-11-10 14:50:47,065 use template cu_losses.mako
2018-11-10 14:50:47,066 use template statorRotor3.mako
2018-11-10 14:50:47,067 use template gen_winding.mako
2018-11-10 14:50:47,068 use template magnetSector.mako
2018-11-10 14:50:47,069 use template cu_losses.mako
2018-11-10 14:50:47,070 use template pm_sym_fast.mako
2018-11-10 14:50:47,070 use template plots.mako
2018-11-10 14:50:47,073 Prepare: stator.statorRotor3.slot_width = 0.003
2018-11-10 14:50:47,074 Prepare: magnet.magnetSector.magn_width_pct = 0.8175
2018-11-10 14:50:47,075 Prepare: magnet.magnetSector.magn_shape = 0.0335
2018-11-10 14:50:47,075 prepare [0.003 0.8175 0.0335]
2018-11-10 14:50:47,077 use template new_model.mako
2018-11-10 14:50:47,078 use template cu_losses.mako
2018-11-10 14:50:47,079 use template statorRotor3.mako
2018-11-10 14:50:47,079 use template gen_winding.mako
2018-11-10 14:50:47,080 use template magnetSector.mako
2018-11-10 14:50:47,081 use template cu_losses.mako
2018-11-10 14:50:47,083 use template pm_sym_fast.mako
2018-11-10 14:50:47,084 use template plots.mako
2018-11-10 14:50:47,087 Prepare: stator.statorRotor3.slot_width = 0.00425
2018-11-10 14:50:47,088 Prepare: magnet.magnetSector.magn_width_pct = 0.8175
2018-11-10 14:50:47,089 Prepare: magnet.magnetSector.magn_shape = 0.0335
2018-11-10 14:50:47,089 prepare [0.00425 0.8175 0.0335 ]
2018-11-10 14:50:47,091 use template new_model.mako
2018-11-10 14:50:47,093 use template cu_losses.mako
2018-11-10 14:50:47,094 use template statorRotor3.mako
2018-11-10 14:50:47,094 use template gen_winding.mako
2018-11-10 14:50:47,095 use template magnetSector.mako
2018-11-10 14:50:47,096 use template cu_losses.mako
2018-11-10 14:50:47,097 use template pm_sym_fast.mako
2018-11-10 14:50:47,098 use template plots.mako
2018-11-10 14:50:47,101 Prepare: stator.statorRotor3.slot_width = 0.0055
2018-11-10 14:50:47,102 Prepare: magnet.magnetSector.magn_width_pct = 0.8175
2018-11-10 14:50:47,102 Prepare: magnet.magnetSector.magn_shape = 0.0335
2018-11-10 14:50:47,103 prepare [0.0055 0.8175 0.0335]
2018-11-10 14:50:47,104 use template new_model.mako
2018-11-10 14:50:47,106 use template cu_losses.mako
2018-11-10 14:50:47,107 use template statorRotor3.mako
2018-11-10 14:50:47,108 use template gen_winding.mako
2018-11-10 14:50:47,109 use template magnetSector.mako
2018-11-10 14:50:47,110 use template cu_losses.mako
2018-11-10 14:50:47,111 use template pm_sym_fast.mako
2018-11-10 14:50:47,112 use template plots.mako
2018-11-10 14:50:47,117 Prepare: stator.statorRotor3.slot_width = 0.00675
2018-11-10 14:50:47,119 Prepare: magnet.magnetSector.magn_width_pct = 0.8175
2018-11-10 14:50:47,120 Prepare: magnet.magnetSector.magn_shape = 0.0335
2018-11-10 14:50:47,122 prepare [0.00675 0.8175 0.0335 ]
2018-11-10 14:50:47,124 use template new_model.mako
2018-11-10 14:50:47,127 use template cu_losses.mako
2018-11-10 14:50:47,130 use template statorRotor3.mako
2018-11-10 14:50:47,131 use template gen_winding.mako
2018-11-10 14:50:47,132 use template magnetSector.mako
2018-11-10 14:50:47,133 use template cu_losses.mako
2018-11-10 14:50:47,134 use template pm_sym_fast.mako
2018-11-10 14:50:47,135 use template plots.mako
2018-11-10 14:50:47,160 Started 17
2018-11-10 14:50:47,163 FEMAG /home/tar/parvar2/1: femag.fsl
2018-11-10 14:50:47,165 FEMAG /home/tar/parvar2/2: femag.fsl
2018-11-10 14:50:47,161 FEMAG /home/tar/parvar2/0: femag.fsl
2018-11-10 14:50:47,167 FEMAG /home/tar/parvar2/3: femag.fsl
2018-11-10 14:51:08,405 Finished pid: 16889 return 0
2018-11-10 14:51:08,407 FEMAG /home/tar/parvar2/4: femag.fsl
2018-11-10 14:51:08,478 Finished pid: 16887 return 0
2018-11-10 14:51:08,481 FEMAG /home/tar/parvar2/5: femag.fsl
2018-11-10 14:51:08,811 Finished pid: 16888 return 0
2018-11-10 14:51:08,814 FEMAG /home/tar/parvar2/6: femag.fsl
2018-11-10 14:51:10,293 Finished pid: 16890 return 0
2018-11-10 14:51:10,295 FEMAG /home/tar/parvar2/7: femag.fsl
2018-11-10 14:51:30,885 Finished pid: 16904 return 0
2018-11-10 14:51:30,887 FEMAG /home/tar/parvar2/8: femag.fsl
2018-11-10 14:51:30,934 Finished pid: 16899 return 0
2018-11-10 14:51:30,936 FEMAG /home/tar/parvar2/9: femag.fsl
2018-11-10 14:51:31,721 Finished pid: 16909 return 0
2018-11-10 14:51:31,723 FEMAG /home/tar/parvar2/10: femag.fsl
2018-11-10 14:51:33,495 Finished pid: 16915 return 0
2018-11-10 14:51:33,497 FEMAG /home/tar/parvar2/11: femag.fsl
2018-11-10 14:51:53,056 Finished pid: 16926 return 0
2018-11-10 14:51:53,058 FEMAG /home/tar/parvar2/12: femag.fsl
2018-11-10 14:51:53,067 Finished pid: 16931 return 0
2018-11-10 14:51:53,069 FEMAG /home/tar/parvar2/13: femag.fsl
2018-11-10 14:51:54,564 Finished pid: 16936 return 0
2018-11-10 14:51:54,566 FEMAG /home/tar/parvar2/14: femag.fsl
2018-11-10 14:51:56,000 Finished pid: 16941 return 0
2018-11-10 14:51:56,006 FEMAG /home/tar/parvar2/15: femag.fsl
2018-11-10 14:52:15,463 Finished pid: 16954 return 0
2018-11-10 14:52:15,465 FEMAG /home/tar/parvar2/16: femag.fsl
2018-11-10 14:52:15,844 Finished pid: 16959 return 0
2018-11-10 14:52:17,849 Finished pid: 16964 return 0
2018-11-10 14:52:18,425 Finished pid: 16971 return 0
2018-11-10 14:52:28,908 Finished pid: 16980 return 0
2018-11-10 14:52:28,911 Reading /home/tar/parvar2/0/PM-4-130_001.BATCH
2018-11-10 14:52:28,919 Reading /home/tar/parvar2/1/PM-4-130_001.BATCH
2018-11-10 14:52:28,927 Reading /home/tar/parvar2/2/PM-4-130_001.BATCH
2018-11-10 14:52:28,934 Reading /home/tar/parvar2/3/PM-4-130_001.BATCH
2018-11-10 14:52:28,945 Reading /home/tar/parvar2/4/PM-4-130_001.BATCH
2018-11-10 14:52:28,952 Reading /home/tar/parvar2/5/PM-4-130_001.BATCH
2018-11-10 14:52:28,959 Reading /home/tar/parvar2/6/PM-4-130_001.BATCH
2018-11-10 14:52:28,968 Reading /home/tar/parvar2/7/PM-4-130_001.BATCH
2018-11-10 14:52:28,976 Reading /home/tar/parvar2/8/PM-4-130_001.BATCH
2018-11-10 14:52:28,984 Reading /home/tar/parvar2/9/PM-4-130_001.BATCH
2018-11-10 14:52:28,990 Reading /home/tar/parvar2/10/PM-4-130_001.BATCH
2018-11-10 14:52:28,999 Reading /home/tar/parvar2/11/PM-4-130_001.BATCH
2018-11-10 14:52:29,007 Reading /home/tar/parvar2/12/PM-4-130_001.BATCH
2018-11-10 14:52:29,014 Reading /home/tar/parvar2/13/PM-4-130_001.BATCH
2018-11-10 14:52:29,023 Reading /home/tar/parvar2/14/PM-4-130_001.BATCH
2018-11-10 14:52:29,032 Reading /home/tar/parvar2/15/PM-4-130_001.BATCH
2018-11-10 14:52:29,039 Reading /home/tar/parvar2/16/PM-4-130_001.BATCH
2018-11-10 14:52:29,047 ........ 8 / 20
2018-11-10 14:52:29,048 rm /home/tar/parvar2/0
2018-11-10 14:52:29,053 rm /home/tar/parvar2/1
2018-11-10 14:52:29,058 rm /home/tar/parvar2/2
2018-11-10 14:52:29,063 rm /home/tar/parvar2/3
2018-11-10 14:52:29,068 rm /home/tar/parvar2/4
2018-11-10 14:52:29,073 rm /home/tar/parvar2/5
2018-11-10 14:52:29,078 rm /home/tar/parvar2/6
2018-11-10 14:52:29,083 rm /home/tar/parvar2/7
2018-11-10 14:52:29,088 rm /home/tar/parvar2/8
2018-11-10 14:52:29,092 rm /home/tar/parvar2/9
2018-11-10 14:52:29,097 rm /home/tar/parvar2/10
2018-11-10 14:52:29,102 rm /home/tar/parvar2/11
2018-11-10 14:52:29,107 rm /home/tar/parvar2/12
2018-11-10 14:52:29,112 rm /home/tar/parvar2/13
2018-11-10 14:52:29,116 rm /home/tar/parvar2/14
2018-11-10 14:52:29,121 rm /home/tar/parvar2/15
2018-11-10 14:52:29,126 rm /home/tar/parvar2/16
2018-11-10 14:52:29,131 Prepare: stator.statorRotor3.slot_width = 0.008
2018-11-10 14:52:29,132 Prepare: magnet.magnetSector.magn_width_pct = 0.8175
2018-11-10 14:52:29,132 Prepare: magnet.magnetSector.magn_shape = 0.0335
2018-11-10 14:52:29,133 prepare [0.008 0.8175 0.0335]
2018-11-10 14:52:29,135 use template new_model.mako
2018-11-10 14:52:29,137 use template cu_losses.mako
2018-11-10 14:52:29,138 use template statorRotor3.mako
2018-11-10 14:52:29,139 use template gen_winding.mako
2018-11-10 14:52:29,140 use template magnetSector.mako
2018-11-10 14:52:29,141 use template cu_losses.mako
2018-11-10 14:52:29,142 use template pm_sym_fast.mako
2018-11-10 14:52:29,143 use template plots.mako
2018-11-10 14:52:29,148 Prepare: stator.statorRotor3.slot_width = 0.003
2018-11-10 14:52:29,149 Prepare: magnet.magnetSector.magn_width_pct = 0.85
2018-11-10 14:52:29,150 Prepare: magnet.magnetSector.magn_shape = 0.0335
2018-11-10 14:52:29,151 prepare [0.003 0.85 0.0335]
2018-11-10 14:52:29,152 use template new_model.mako
2018-11-10 14:52:29,153 use template cu_losses.mako
2018-11-10 14:52:29,154 use template statorRotor3.mako
2018-11-10 14:52:29,155 use template gen_winding.mako
2018-11-10 14:52:29,157 use template magnetSector.mako
2018-11-10 14:52:29,158 use template cu_losses.mako
2018-11-10 14:52:29,159 use template pm_sym_fast.mako
2018-11-10 14:52:29,162 use template plots.mako
2018-11-10 14:52:29,167 Prepare: stator.statorRotor3.slot_width = 0.00425
2018-11-10 14:52:29,168 Prepare: magnet.magnetSector.magn_width_pct = 0.85
2018-11-10 14:52:29,169 Prepare: magnet.magnetSector.magn_shape = 0.0335
2018-11-10 14:52:29,170 prepare [0.00425 0.85 0.0335 ]
2018-11-10 14:52:29,172 use template new_model.mako
2018-11-10 14:52:29,173 use template cu_losses.mako
2018-11-10 14:52:29,175 use template statorRotor3.mako
2018-11-10 14:52:29,175 use template gen_winding.mako
2018-11-10 14:52:29,177 use template magnetSector.mako
2018-11-10 14:52:29,179 use template cu_losses.mako
2018-11-10 14:52:29,180 use template pm_sym_fast.mako
2018-11-10 14:52:29,181 use template plots.mako
2018-11-10 14:52:29,184 Prepare: stator.statorRotor3.slot_width = 0.0055
2018-11-10 14:52:29,185 Prepare: magnet.magnetSector.magn_width_pct = 0.85
2018-11-10 14:52:29,186 Prepare: magnet.magnetSector.magn_shape = 0.0335
2018-11-10 14:52:29,186 prepare [0.0055 0.85 0.0335]
2018-11-10 14:52:29,188 use template new_model.mako
2018-11-10 14:52:29,190 use template cu_losses.mako
2018-11-10 14:52:29,191 use template statorRotor3.mako
2018-11-10 14:52:29,192 use template gen_winding.mako
2018-11-10 14:52:29,193 use template magnetSector.mako
2018-11-10 14:52:29,194 use template cu_losses.mako
2018-11-10 14:52:29,195 use template pm_sym_fast.mako
2018-11-10 14:52:29,195 use template plots.mako
2018-11-10 14:52:29,198 Prepare: stator.statorRotor3.slot_width = 0.00675
2018-11-10 14:52:29,199 Prepare: magnet.magnetSector.magn_width_pct = 0.85
2018-11-10 14:52:29,199 Prepare: magnet.magnetSector.magn_shape = 0.0335
2018-11-10 14:52:29,200 prepare [0.00675 0.85 0.0335 ]
2018-11-10 14:52:29,201 use template new_model.mako
2018-11-10 14:52:29,203 use template cu_losses.mako
2018-11-10 14:52:29,206 use template statorRotor3.mako
2018-11-10 14:52:29,207 use template gen_winding.mako
2018-11-10 14:52:29,208 use template magnetSector.mako
2018-11-10 14:52:29,209 use template cu_losses.mako
2018-11-10 14:52:29,210 use template pm_sym_fast.mako
2018-11-10 14:52:29,211 use template plots.mako
2018-11-10 14:52:29,214 Prepare: stator.statorRotor3.slot_width = 0.008
2018-11-10 14:52:29,215 Prepare: magnet.magnetSector.magn_width_pct = 0.85
2018-11-10 14:52:29,216 Prepare: magnet.magnetSector.magn_shape = 0.0335
2018-11-10 14:52:29,217 prepare [0.008 0.85 0.0335]
2018-11-10 14:52:29,218 use template new_model.mako
2018-11-10 14:52:29,219 use template cu_losses.mako
2018-11-10 14:52:29,220 use template statorRotor3.mako
2018-11-10 14:52:29,221 use template gen_winding.mako
2018-11-10 14:52:29,222 use template magnetSector.mako
2018-11-10 14:52:29,223 use template cu_losses.mako
2018-11-10 14:52:29,224 use template pm_sym_fast.mako
2018-11-10 14:52:29,225 use template plots.mako
2018-11-10 14:52:29,253 Started 6
2018-11-10 14:52:29,254 FEMAG /home/tar/parvar2/0: femag.fsl
2018-11-10 14:52:29,256 FEMAG /home/tar/parvar2/1: femag.fsl
2018-11-10 14:52:29,256 FEMAG /home/tar/parvar2/2: femag.fsl
2018-11-10 14:52:29,258 FEMAG /home/tar/parvar2/3: femag.fsl
2018-11-10 14:52:52,088 Finished pid: 17008 return 0
2018-11-10 14:52:52,091 FEMAG /home/tar/parvar2/4: femag.fsl
2018-11-10 14:52:52,121 Finished pid: 17010 return 0
2018-11-10 14:52:52,123 FEMAG /home/tar/parvar2/5: femag.fsl
2018-11-10 14:52:52,418 Finished pid: 17011 return 0
2018-11-10 14:52:52,771 Finished pid: 17007 return 0
2018-11-10 14:53:05,295 Finished pid: 17024 return 0
2018-11-10 14:53:05,458 Finished pid: 17029 return 0
2018-11-10 14:53:05,460 Reading /home/tar/parvar2/0/PM-4-130_001.BATCH
2018-11-10 14:53:05,469 Reading /home/tar/parvar2/1/PM-4-130_001.BATCH
2018-11-10 14:53:05,476 Reading /home/tar/parvar2/2/PM-4-130_001.BATCH
2018-11-10 14:53:05,483 Reading /home/tar/parvar2/3/PM-4-130_001.BATCH
2018-11-10 14:53:05,490 Reading /home/tar/parvar2/4/PM-4-130_001.BATCH
2018-11-10 14:53:05,497 Reading /home/tar/parvar2/5/PM-4-130_001.BATCH
2018-11-10 14:53:05,504 ...... DONE
2018-11-10 14:53:05,505 f shape (3, 125) --> [3, 5, 5, 5]
Print the results in table form:
In [10]:
import numpy as np
x = femagtools.grid.create_parameter_range(results['x'])
f = np.reshape(results['f'], (np.shape(results['f'])[0], np.shape(x)[0]))
# print header
print(' '.join(['{:15}'.format(s)
for s in [d['label']
for d in parvardef['decision_vars']] +
[o['label']
for o in parvardef['objective_vars']]]))
print()
# print values in table format
for l in np.hstack((x, f.T)):
print(' '.join(['{:15.4f}'.format(x) for x in l]))
Slot Width/m Rel. Magnet Width Magnet Shape/m Load Torque/Nm Cogging Torque/Nm Torque Ripple/Nm
0.0030 0.7200 0.0240 13.8000 0.0664 0.4070
0.0043 0.7200 0.0240 13.6000 0.1467 0.5060
0.0055 0.7200 0.0240 13.4000 0.2798 0.6300
0.0067 0.7200 0.0240 13.2000 0.4200 0.8020
0.0080 0.7200 0.0240 12.9000 0.5493 1.0030
0.0030 0.7525 0.0240 13.9000 0.0811 0.2010
0.0043 0.7525 0.0240 13.8000 0.1113 0.2670
0.0055 0.7525 0.0240 13.6000 0.1317 0.3500
0.0067 0.7525 0.0240 13.3000 0.1561 0.4240
0.0080 0.7525 0.0240 13.0000 0.1883 0.4880
0.0030 0.7850 0.0240 14.0000 0.0644 0.1110
0.0043 0.7850 0.0240 13.8000 0.1096 0.1370
0.0055 0.7850 0.0240 13.6000 0.1579 0.1800
0.0067 0.7850 0.0240 13.4000 0.2037 0.2230
0.0080 0.7850 0.0240 13.1000 0.2404 0.2530
0.0030 0.8175 0.0240 14.0000 0.0434 0.1320
0.0043 0.8175 0.0240 13.9000 0.0983 0.1670
0.0055 0.8175 0.0240 13.7000 0.1651 0.2190
0.0067 0.8175 0.0240 13.4000 0.2386 0.2880
0.0080 0.8175 0.0240 13.1000 0.3093 0.3560
0.0030 0.8500 0.0240 14.0000 0.0405 0.1380
0.0043 0.8500 0.0240 13.9000 0.0971 0.1750
0.0055 0.8500 0.0240 13.7000 0.1676 0.2310
0.0067 0.8500 0.0240 13.4000 0.2454 0.3000
0.0080 0.8500 0.0240 13.1000 0.3213 0.3710
0.0030 0.7200 0.0264 14.4000 0.1940 0.6040
0.0043 0.7200 0.0264 14.3000 0.2163 0.7620
0.0055 0.7200 0.0264 14.1000 0.4276 0.9900
0.0067 0.7200 0.0264 13.8000 0.6437 1.2430
0.0080 0.7200 0.0264 13.5000 0.8387 1.5660
0.0030 0.7525 0.0264 14.6000 0.2813 0.3810
0.0043 0.7525 0.0264 14.5000 0.4228 0.5000
0.0055 0.7525 0.0264 14.3000 0.5411 0.7030
0.0067 0.7525 0.0264 14.0000 0.6013 0.8830
0.0080 0.7525 0.0264 13.7000 0.5755 1.0040
0.0030 0.7850 0.0264 14.7000 0.2692 0.4380
0.0043 0.7850 0.0264 14.6000 0.4521 0.5510
0.0055 0.7850 0.0264 14.4000 0.6442 0.7370
0.0067 0.7850 0.0264 14.1000 0.8297 0.9010
0.0080 0.7850 0.0264 13.8000 0.9708 1.0100
0.0030 0.8175 0.0264 14.9000 0.2190 0.4750
0.0043 0.8175 0.0264 14.7000 0.4327 0.5990
0.0055 0.8175 0.0264 14.5000 0.6849 0.8180
0.0067 0.8175 0.0264 14.2000 0.9460 1.0520
0.0080 0.8175 0.0264 13.9000 1.1855 1.2680
0.0030 0.8500 0.0264 14.9000 0.2170 0.4800
0.0043 0.8500 0.0264 14.7000 0.4210 0.6130
0.0055 0.8500 0.0264 14.5000 0.6768 0.8240
0.0067 0.8500 0.0264 14.2000 0.9453 1.0670
0.0080 0.8500 0.0264 13.9000 1.1961 1.2970
0.0030 0.7200 0.0288 15.0000 0.4280 0.8260
0.0043 0.7200 0.0288 14.8000 0.5177 1.0640
0.0055 0.7200 0.0288 14.6000 0.4606 1.3820
0.0067 0.7200 0.0288 14.3000 0.7270 1.6970
0.0080 0.7200 0.0288 14.0000 0.9533 2.1260
0.0030 0.7525 0.0288 15.2000 0.6444 0.7970
0.0043 0.7525 0.0288 15.0000 0.9750 1.0310
0.0055 0.7525 0.0288 14.8000 1.2542 1.2660
0.0067 0.7525 0.0288 14.5000 1.4172 1.5130
0.0080 0.7525 0.0288 14.2000 1.4050 1.7220
0.0030 0.7850 0.0288 15.4000 0.6186 0.8990
0.0043 0.7850 0.0288 15.2000 1.0550 1.2480
0.0055 0.7850 0.0288 15.0000 1.5349 1.6660
0.0067 0.7850 0.0288 14.7000 1.9593 2.0310
0.0080 0.7850 0.0288 14.4000 2.2488 2.2810
0.0030 0.8175 0.0288 15.5000 0.5765 0.9470
0.0043 0.8175 0.0288 15.4000 1.0807 1.3290
0.0055 0.8175 0.0288 15.2000 1.6442 1.8080
0.0067 0.8175 0.0288 14.9000 2.2056 2.2990
0.0080 0.8175 0.0288 14.5000 2.7042 2.7670
0.0030 0.8500 0.0288 15.6000 0.5542 0.9550
0.0043 0.8500 0.0288 15.4000 1.0644 1.3330
0.0055 0.8500 0.0288 15.2000 1.6425 1.8270
0.0067 0.8500 0.0288 14.9000 2.2229 2.3290
0.0080 0.8500 0.0288 14.6000 2.7428 2.7930
0.0030 0.7200 0.0311 15.4000 0.8139 1.0720
0.0043 0.7200 0.0311 15.2000 0.9683 1.4170
0.0055 0.7200 0.0311 15.0000 0.8512 1.8000
0.0067 0.7200 0.0311 14.7000 0.6723 2.1210
0.0080 0.7200 0.0311 14.4000 0.9107 2.6340
0.0030 0.7525 0.0311 15.7000 1.1582 1.3820
0.0043 0.7525 0.0311 15.5000 1.7457 1.8740
0.0055 0.7525 0.0311 15.3000 2.2517 2.2660
0.0067 0.7525 0.0311 15.0000 2.5607 2.5760
0.0080 0.7525 0.0311 14.7000 2.5673 2.5850
0.0030 0.7850 0.0311 15.9000 1.1768 1.5800
0.0043 0.7850 0.0311 15.8000 2.0212 2.2070
0.0055 0.7850 0.0311 15.5000 2.8637 2.9270
0.0067 0.7850 0.0311 15.2000 3.5696 3.5820
0.0080 0.7850 0.0311 14.9000 4.0229 4.0370
0.0030 0.8175 0.0311 16.1000 1.1679 1.6050
0.0043 0.8175 0.0311 16.0000 2.0624 2.3060
0.0055 0.8175 0.0311 15.7000 3.0116 3.2230
0.0067 0.8175 0.0311 15.4000 3.9199 4.1240
0.0080 0.8175 0.0311 15.1000 4.7097 4.8690
0.0030 0.8500 0.0311 16.1000 1.1416 1.6070
0.0043 0.8500 0.0311 16.0000 2.0558 2.3240
0.0055 0.8500 0.0311 15.8000 3.0327 3.2120
0.0067 0.8500 0.0311 15.5000 3.9716 4.1480
0.0080 0.8500 0.0311 15.1000 4.7914 4.9340
0.0030 0.7200 0.0335 15.8000 1.3100 1.3210
0.0043 0.7200 0.0335 15.6000 1.4763 1.7850
0.0055 0.7200 0.0335 15.4000 1.4027 2.1790
0.0067 0.7200 0.0335 15.1000 1.1652 2.4730
0.0080 0.7200 0.0335 14.7000 0.7261 3.0670
0.0030 0.7525 0.0335 16.1000 1.7769 2.2010
0.0043 0.7525 0.0335 15.9000 2.6743 2.9490
0.0055 0.7525 0.0335 15.7000 3.4653 3.4830
0.0067 0.7525 0.0335 15.4000 3.9648 3.9850
0.0080 0.7525 0.0335 15.0000 3.9696 3.9920
0.0030 0.7850 0.0335 16.4000 1.9957 2.4020
0.0043 0.7850 0.0335 16.2000 3.2799 3.3460
0.0055 0.7850 0.0335 16.0000 4.5115 4.5230
0.0067 0.7850 0.0335 15.7000 5.5274 5.5430
0.0080 0.7850 0.0335 15.3000 6.1772 6.1950
0.0030 0.8175 0.0335 16.6000 1.9644 2.3580
0.0043 0.8175 0.0335 16.5000 3.2834 3.6530
0.0055 0.8175 0.0335 16.2000 4.6425 5.0480
0.0067 0.8175 0.0335 15.9000 5.9286 6.3350
0.0080 0.8175 0.0335 15.5000 7.0594 7.3870
0.0030 0.8500 0.0335 16.6000 1.9627 2.3780
0.0043 0.8500 0.0335 16.5000 3.3166 3.6260
0.0055 0.8500 0.0335 16.2000 4.7101 5.0610
0.0067 0.8500 0.0335 15.9000 6.0283 6.3920
0.0080 0.8500 0.0335 15.6000 7.1825 7.4930
The next step will be the creation of the pareto sets. Before doing that we must define the optimization criteria. We want all values be minimize with the exception of the torque:
In [11]:
parvardef['objective_vars'][0]['sign']=-1
Now we are ready to create the pareto sets:
In [12]:
import femagtools.moproblem
import femagtools.moo
size = np.shape(f)[1]
prob = femagtools.moproblem.FemagMoProblem(parvardef['decision_vars'],
parvardef['objective_vars'])
pop = femagtools.moo.Population(prob, size)
signs = [o.get('sign', 1)
for o in parvardef['objective_vars']]
pop.populate(x, f, signs)
px = pop.get_ranked_decisions()
po = pop.get_ranked_objectives(signs)
#
fp = dict()
xp = dict()
for k in po:
#print("k {} len {}".format(k, len(pareto[k])))
fp[k] = np.array(po[k]).T
xp[k] = np.array(px[k]).T
for k in xp:
xp[k] = [xp[k][0]*1e3, xp[k][1], xp[k][2]*1e3]
2018-11-10 15:09:05,411 Decision Vars: ['stator.statorRotor3.slot_width', 'magnet.magnetSector.magn_width_pct', 'magnet.magnetSector.magn_shape']
2018-11-10 15:09:05,413 bounds lower: (0.003, 0.72, 0.024) upper: (0.008, 0.85, 0.0335)
Show the results of the pareto front
In [13]:
np.concatenate((np.array(xp[0]), fp[0])).T
Out[13]:
array([[ 3. , 0.785 , 24. , 14. , 0.06441 , 0.111 ],
[ 3. , 0.8175 , 24. , 14. , 0.043412, 0.132 ],
[ 3. , 0.85 , 24. , 14. , 0.040478, 0.138 ],
[ 3. , 0.72 , 26.375 , 14.4 , 0.193998, 0.604 ],
[ 3. , 0.7525 , 26.375 , 14.6 , 0.28134 , 0.381 ],
[ 3. , 0.785 , 26.375 , 14.7 , 0.26923 , 0.438 ],
[ 3. , 0.8175 , 26.375 , 14.9 , 0.21904 , 0.475 ],
[ 3. , 0.85 , 26.375 , 14.9 , 0.21699 , 0.48 ],
[ 3. , 0.72 , 28.75 , 15. , 0.428 , 0.826 ],
[ 3. , 0.7525 , 28.75 , 15.2 , 0.64445 , 0.797 ],
[ 3. , 0.785 , 28.75 , 15.4 , 0.61865 , 0.899 ],
[ 3. , 0.8175 , 28.75 , 15.5 , 0.57652 , 0.947 ],
[ 3. , 0.85 , 28.75 , 15.6 , 0.55417 , 0.955 ],
[ 3. , 0.7525 , 31.125 , 15.7 , 1.15815 , 1.382 ],
[ 3. , 0.785 , 31.125 , 15.9 , 1.17678 , 1.58 ],
[ 3. , 0.8175 , 31.125 , 16.1 , 1.16789 , 1.605 ],
[ 3. , 0.85 , 31.125 , 16.1 , 1.14163 , 1.607 ],
[ 3. , 0.72 , 33.5 , 15.8 , 1.31005 , 1.321 ],
[ 3. , 0.8175 , 33.5 , 16.6 , 1.96439 , 2.358 ],
[ 3. , 0.85 , 33.5 , 16.6 , 1.96271 , 2.378 ]])
Display a 3D scatter plot with all results and the pareto front:
In [14]:
import matplotlib.pyplot as pl
import matplotlib.colors
import matplotlib.cm
import mpl_toolkits.mplot3d as mpl
cm = pl.get_cmap('jet')
cNorm = matplotlib.colors.Normalize(vmin=0, vmax=max(fp.keys()))
scalarMap = matplotlib.cm.ScalarMappable(norm=cNorm, cmap=cm)
fig = pl.figure()
ax = fig.add_subplot(111, projection='3d')
for k in fp:
ax.scatter(fp[k][0], fp[k][1], fp[k][2], color=scalarMap.to_rgba(k))
ax.plot(fp[0][0], fp[0][1], fp[0][2],
color='red', linewidth=3, label='Pareto Front')
ax.set_xlabel(parvardef['objective_vars'][0]['label'])
ax.set_ylabel(parvardef['objective_vars'][1]['label'])
ax.set_zlabel(parvardef['objective_vars'][2]['label'])
pl.legend()
pl.show()
In [15]:
pl.plot(fp[0][0], fp[0][2], 'o')
pl.show()
With multi objective optimization
In [16]:
import femagtools.opt
import femagtools.condor
workdir = os.path.join(userdir, 'opti')
try:
os.makedirs(workdir)
except OSError:
pass
parvardef['population_size'] = 32
parvardef['decision_vars'][0]['desc'] = 'Slot width/mm'
parvardef['decision_vars'][1]['desc'] = 'rel. Magn. width'
parvardef['decision_vars'][2]['desc'] = 'Magn. Shape/mm'
parvardef['objective_vars'][0]['desc'] = 'Load Torque/Nm'
parvardef['objective_vars'][1]['desc'] = 'Cogging Torque/Nm'
parvardef['objective_vars'][2]['desc'] = 'Torque Ripple/Nm'
engine = femagtools.condor.Engine()
opt = femagtools.opt.Optimizer(workdir, magnetizingCurves=dict(), magnetMat=dict())
num_generations = 3
results = opt.optimize(num_generations, parvardef, machine, operatingConditions, engine)
2017-10-30 15:50:42,644 Decision Vars: ['stator.statorRotor3.slot_width', 'magnet.magnetSector.magn_width_pct', 'magnet.magnetSector.magn_shape']
2017-10-30 15:50:42,646 bounds lower: (0.003, 0.72, 0.024) upper: (0.008, 0.85, 0.0335)
2017-10-30 15:50:42,654 Optimize x:3 f:3 generations:3 population size:32
2017-10-30 15:50:42,657 Generation 0
2017-10-30 15:50:42,729 Prepare: stator.statorRotor3.slot_width = 0.006901227065961834
2017-10-30 15:50:42,731 Prepare: magnet.magnetSector.magn_width_pct = 0.8392199204543361
2017-10-30 15:50:42,734 Prepare: magnet.magnetSector.magn_shape = 0.03281609356411196
2017-10-30 15:50:42,859 Prepare: stator.statorRotor3.slot_width = 0.007158868415395981
2017-10-30 15:50:42,861 Prepare: magnet.magnetSector.magn_width_pct = 0.7667729810900695
2017-10-30 15:50:42,863 Prepare: magnet.magnetSector.magn_shape = 0.025539425300242044
2017-10-30 15:50:42,872 Prepare: stator.statorRotor3.slot_width = 0.004655262118164552
2017-10-30 15:50:42,875 Prepare: magnet.magnetSector.magn_width_pct = 0.8117254599070058
2017-10-30 15:50:42,877 Prepare: magnet.magnetSector.magn_shape = 0.030163703807396653
2017-10-30 15:50:42,885 Prepare: stator.statorRotor3.slot_width = 0.007904180354160833
2017-10-30 15:50:42,887 Prepare: magnet.magnetSector.magn_width_pct = 0.7485967788891675
2017-10-30 15:50:42,889 Prepare: magnet.magnetSector.magn_shape = 0.03324612623665016
2017-10-30 15:50:42,896 Prepare: stator.statorRotor3.slot_width = 0.007702464285613882
2017-10-30 15:50:42,898 Prepare: magnet.magnetSector.magn_width_pct = 0.8465444254959225
2017-10-30 15:50:42,900 Prepare: magnet.magnetSector.magn_shape = 0.030850483134028803
2017-10-30 15:50:42,907 Prepare: stator.statorRotor3.slot_width = 0.003401321566643207
2017-10-30 15:50:42,910 Prepare: magnet.magnetSector.magn_width_pct = 0.7904216341349908
2017-10-30 15:50:42,917 Prepare: magnet.magnetSector.magn_shape = 0.029905244833702157
2017-10-30 15:50:42,932 Prepare: stator.statorRotor3.slot_width = 0.00629076858417382
2017-10-30 15:50:42,934 Prepare: magnet.magnetSector.magn_width_pct = 0.7462642382406921
2017-10-30 15:50:42,939 Prepare: magnet.magnetSector.magn_shape = 0.0322485913647169
2017-10-30 15:50:42,951 Prepare: stator.statorRotor3.slot_width = 0.007180354720031574
2017-10-30 15:50:42,954 Prepare: magnet.magnetSector.magn_width_pct = 0.8011776869223982
2017-10-30 15:50:42,957 Prepare: magnet.magnetSector.magn_shape = 0.028946941023938265
2017-10-30 15:50:42,968 Prepare: stator.statorRotor3.slot_width = 0.0055284826632473645
2017-10-30 15:50:42,971 Prepare: magnet.magnetSector.magn_width_pct = 0.792712503217527
2017-10-30 15:50:42,974 Prepare: magnet.magnetSector.magn_shape = 0.030720701573482917
2017-10-30 15:50:42,986 Prepare: stator.statorRotor3.slot_width = 0.005506909380768515
2017-10-30 15:50:42,990 Prepare: magnet.magnetSector.magn_width_pct = 0.7761532378789614
2017-10-30 15:50:42,994 Prepare: magnet.magnetSector.magn_shape = 0.03171435884016765
2017-10-30 15:50:43,005 Prepare: stator.statorRotor3.slot_width = 0.007385490438757859
2017-10-30 15:50:43,007 Prepare: magnet.magnetSector.magn_width_pct = 0.7929758837433493
2017-10-30 15:50:43,009 Prepare: magnet.magnetSector.magn_shape = 0.02434202924976189
2017-10-30 15:50:43,016 Prepare: stator.statorRotor3.slot_width = 0.0037531340037141904
2017-10-30 15:50:43,018 Prepare: magnet.magnetSector.magn_width_pct = 0.7395139785258766
2017-10-30 15:50:43,019 Prepare: magnet.magnetSector.magn_shape = 0.026929736343774956
2017-10-30 15:50:43,026 Prepare: stator.statorRotor3.slot_width = 0.00574079120206512
2017-10-30 15:50:43,028 Prepare: magnet.magnetSector.magn_width_pct = 0.761989488090487
2017-10-30 15:50:43,030 Prepare: magnet.magnetSector.magn_shape = 0.030018457305169957
2017-10-30 15:50:43,042 Prepare: stator.statorRotor3.slot_width = 0.004374010095760435
2017-10-30 15:50:43,046 Prepare: magnet.magnetSector.magn_width_pct = 0.8267273154654082
2017-10-30 15:50:43,051 Prepare: magnet.magnetSector.magn_shape = 0.0249388670348265
2017-10-30 15:50:43,066 Prepare: stator.statorRotor3.slot_width = 0.004958591104744328
2017-10-30 15:50:43,069 Prepare: magnet.magnetSector.magn_width_pct = 0.7803825530802385
2017-10-30 15:50:43,073 Prepare: magnet.magnetSector.magn_shape = 0.03172229290518559
2017-10-30 15:50:43,086 Prepare: stator.statorRotor3.slot_width = 0.007818281960158248
2017-10-30 15:50:43,089 Prepare: magnet.magnetSector.magn_width_pct = 0.7442935310231404
2017-10-30 15:50:43,094 Prepare: magnet.magnetSector.magn_shape = 0.026188799333001285
2017-10-30 15:50:43,107 Prepare: stator.statorRotor3.slot_width = 0.007032621412348174
2017-10-30 15:50:43,110 Prepare: magnet.magnetSector.magn_width_pct = 0.830220684185348
2017-10-30 15:50:43,113 Prepare: magnet.magnetSector.magn_shape = 0.02635191970759602
2017-10-30 15:50:43,124 Prepare: stator.statorRotor3.slot_width = 0.007972547953512463
2017-10-30 15:50:43,127 Prepare: magnet.magnetSector.magn_width_pct = 0.7305084227707717
2017-10-30 15:50:43,131 Prepare: magnet.magnetSector.magn_shape = 0.03332156323622607
2017-10-30 15:50:43,146 Prepare: stator.statorRotor3.slot_width = 0.005554300027532825
2017-10-30 15:50:43,151 Prepare: magnet.magnetSector.magn_width_pct = 0.7805010501109835
2017-10-30 15:50:43,155 Prepare: magnet.magnetSector.magn_shape = 0.03064752884568535
2017-10-30 15:50:43,168 Prepare: stator.statorRotor3.slot_width = 0.007237865523054685
2017-10-30 15:50:43,174 Prepare: magnet.magnetSector.magn_width_pct = 0.815191424727567
2017-10-30 15:50:43,178 Prepare: magnet.magnetSector.magn_shape = 0.030061777385290325
2017-10-30 15:50:43,189 Prepare: stator.statorRotor3.slot_width = 0.00398699290440882
2017-10-30 15:50:43,195 Prepare: magnet.magnetSector.magn_width_pct = 0.780417118963839
2017-10-30 15:50:43,197 Prepare: magnet.magnetSector.magn_shape = 0.028456790791578528
2017-10-30 15:50:43,205 Prepare: stator.statorRotor3.slot_width = 0.0039487721400293906
2017-10-30 15:50:43,208 Prepare: magnet.magnetSector.magn_width_pct = 0.8271720203006165
2017-10-30 15:50:43,210 Prepare: magnet.magnetSector.magn_shape = 0.026035465464019594
2017-10-30 15:50:43,217 Prepare: stator.statorRotor3.slot_width = 0.004345120467753229
2017-10-30 15:50:43,219 Prepare: magnet.magnetSector.magn_width_pct = 0.7645473396280027
2017-10-30 15:50:43,221 Prepare: magnet.magnetSector.magn_shape = 0.029174512205180615
2017-10-30 15:50:43,228 Prepare: stator.statorRotor3.slot_width = 0.00678262811658813
2017-10-30 15:50:43,231 Prepare: magnet.magnetSector.magn_width_pct = 0.811331302176486
2017-10-30 15:50:43,233 Prepare: magnet.magnetSector.magn_shape = 0.03308124529030651
2017-10-30 15:50:43,246 Prepare: stator.statorRotor3.slot_width = 0.006615125719099288
2017-10-30 15:50:43,249 Prepare: magnet.magnetSector.magn_width_pct = 0.7685107962687447
2017-10-30 15:50:43,251 Prepare: magnet.magnetSector.magn_shape = 0.030243375586233197
2017-10-30 15:50:43,264 Prepare: stator.statorRotor3.slot_width = 0.0037500088390767777
2017-10-30 15:50:43,267 Prepare: magnet.magnetSector.magn_width_pct = 0.7628212910132631
2017-10-30 15:50:43,270 Prepare: magnet.magnetSector.magn_shape = 0.030508228053290253
2017-10-30 15:50:43,285 Prepare: stator.statorRotor3.slot_width = 0.005045974139236728
2017-10-30 15:50:43,292 Prepare: magnet.magnetSector.magn_width_pct = 0.7706795524680236
2017-10-30 15:50:43,295 Prepare: magnet.magnetSector.magn_shape = 0.030502513521548945
2017-10-30 15:50:43,306 Prepare: stator.statorRotor3.slot_width = 0.005196259539970246
2017-10-30 15:50:43,310 Prepare: magnet.magnetSector.magn_width_pct = 0.7515424856946982
2017-10-30 15:50:43,315 Prepare: magnet.magnetSector.magn_shape = 0.02484026784569315
2017-10-30 15:50:43,328 Prepare: stator.statorRotor3.slot_width = 0.004282436149005302
2017-10-30 15:50:43,331 Prepare: magnet.magnetSector.magn_width_pct = 0.8217324690741042
2017-10-30 15:50:43,335 Prepare: magnet.magnetSector.magn_shape = 0.02500970893669667
2017-10-30 15:50:43,347 Prepare: stator.statorRotor3.slot_width = 0.006023695139685942
2017-10-30 15:50:43,351 Prepare: magnet.magnetSector.magn_width_pct = 0.772457164146212
2017-10-30 15:50:43,353 Prepare: magnet.magnetSector.magn_shape = 0.02640879111717351
2017-10-30 15:50:43,365 Prepare: stator.statorRotor3.slot_width = 0.0067590344526303366
2017-10-30 15:50:43,367 Prepare: magnet.magnetSector.magn_width_pct = 0.8272621132696466
2017-10-30 15:50:43,370 Prepare: magnet.magnetSector.magn_shape = 0.0243095546028629
2017-10-30 15:50:43,381 Prepare: stator.statorRotor3.slot_width = 0.006532988286281937
2017-10-30 15:50:43,383 Prepare: magnet.magnetSector.magn_width_pct = 0.7713249829301912
2017-10-30 15:50:43,387 Prepare: magnet.magnetSector.magn_shape = 0.029098910356390326
2017-10-30 15:50:43,725 submit cluster 193
2017-10-30 15:53:16,677 status 22: C
2017-10-30 15:53:16,680 status 20: C
2017-10-30 15:53:16,682 status 29: C
2017-10-30 15:53:16,683 status 23: C
2017-10-30 15:53:16,685 status 30: C
2017-10-30 15:53:16,687 status 28: C
2017-10-30 15:53:16,688 status 27: C
2017-10-30 15:53:16,690 status 31: C
2017-10-30 15:53:16,692 status 16: C
2017-10-30 15:53:16,694 status 19: C
2017-10-30 15:53:16,696 status 18: C
2017-10-30 15:53:16,698 status 25: C
2017-10-30 15:53:16,701 status 26: C
2017-10-30 15:53:16,702 status 17: C
2017-10-30 15:53:16,704 status 9: C
2017-10-30 15:53:16,706 status 24: C
2017-10-30 15:53:16,708 status 11: C
2017-10-30 15:53:16,710 status 13: C
2017-10-30 15:53:16,712 status 2: C
2017-10-30 15:53:16,713 status 15: C
2017-10-30 15:53:16,715 status 0: C
2017-10-30 15:53:16,717 status 10: C
2017-10-30 15:53:16,719 status 1: C
2017-10-30 15:53:16,721 status 6: C
2017-10-30 15:53:16,722 status 3: C
2017-10-30 15:53:16,724 status 4: C
2017-10-30 15:53:16,726 status 12: C
2017-10-30 15:53:16,728 status 8: C
2017-10-30 15:53:16,729 status 14: C
2017-10-30 15:53:16,731 status 5: C
2017-10-30 15:53:16,733 status 7: C
2017-10-30 15:53:16,735 finished cluster 193
2017-10-30 15:53:16,738 Reading /home/tar/opti/0/PM-4-130_001.BATCH
2017-10-30 15:53:16,760 Reading /home/tar/opti/1/PM-4-130_001.BATCH
2017-10-30 15:53:16,781 Reading /home/tar/opti/2/PM-4-130_001.BATCH
2017-10-30 15:53:16,799 Reading /home/tar/opti/3/PM-4-130_001.BATCH
2017-10-30 15:53:16,815 Reading /home/tar/opti/4/PM-4-130_001.BATCH
2017-10-30 15:53:16,831 Reading /home/tar/opti/5/PM-4-130_001.BATCH
2017-10-30 15:53:16,849 Reading /home/tar/opti/6/PM-4-130_001.BATCH
2017-10-30 15:53:16,871 Reading /home/tar/opti/7/PM-4-130_001.BATCH
2017-10-30 15:53:16,899 Reading /home/tar/opti/8/PM-4-130_001.BATCH
2017-10-30 15:53:16,932 Reading /home/tar/opti/9/PM-4-130_001.BATCH
2017-10-30 15:53:16,960 Reading /home/tar/opti/10/PM-4-130_001.BATCH
2017-10-30 15:53:16,975 Reading /home/tar/opti/11/PM-4-130_001.BATCH
2017-10-30 15:53:16,996 Reading /home/tar/opti/12/PM-4-130_001.BATCH
2017-10-30 15:53:17,014 Reading /home/tar/opti/13/PM-4-130_001.BATCH
2017-10-30 15:53:17,039 Reading /home/tar/opti/14/PM-4-130_001.BATCH
2017-10-30 15:53:17,056 Reading /home/tar/opti/15/PM-4-130_001.BATCH
2017-10-30 15:53:17,080 Reading /home/tar/opti/16/PM-4-130_001.BATCH
2017-10-30 15:53:17,098 Reading /home/tar/opti/17/PM-4-130_001.BATCH
2017-10-30 15:53:17,118 Reading /home/tar/opti/18/PM-4-130_001.BATCH
2017-10-30 15:53:17,138 Reading /home/tar/opti/19/PM-4-130_001.BATCH
2017-10-30 15:53:17,158 Reading /home/tar/opti/20/PM-4-130_001.BATCH
2017-10-30 15:53:17,179 Task 28c98b8e-d988-40d8-aaeb-2b09736ac5a4-21 failed with status None
2017-10-30 15:53:17,182 Reading /home/tar/opti/22/PM-4-130_001.BATCH
2017-10-30 15:53:17,204 Reading /home/tar/opti/23/PM-4-130_001.BATCH
2017-10-30 15:53:17,223 Reading /home/tar/opti/24/PM-4-130_001.BATCH
2017-10-30 15:53:17,245 Reading /home/tar/opti/25/PM-4-130_001.BATCH
2017-10-30 15:53:17,266 Reading /home/tar/opti/26/PM-4-130_001.BATCH
2017-10-30 15:53:17,285 Reading /home/tar/opti/27/PM-4-130_001.BATCH
2017-10-30 15:53:17,301 Reading /home/tar/opti/28/PM-4-130_001.BATCH
2017-10-30 15:53:17,322 Reading /home/tar/opti/29/PM-4-130_001.BATCH
2017-10-30 15:53:17,340 Reading /home/tar/opti/30/PM-4-130_001.BATCH
2017-10-30 15:53:17,361 Reading /home/tar/opti/31/PM-4-130_001.BATCH
2017-10-30 15:53:17,383 Generation: 0
rank torque[-1]ripple ripple slot_width magn_width_pctmagn_shape
1, -15.80, 5.54, 5.85, 0.0069, 0.8392, 0.0328,
2, -13.70, 0.51, 0.59, 0.0072, 0.7668, 0.0255,
2, -15.60, 1.87, 2.07, 0.0047, 0.8117, 0.0302,
7, -15.00, 3.51, 3.54, 0.0079, 0.7486, 0.0332,
7, -15.10, 4.37, 4.51, 0.0077, 0.8465, 0.0309,
0, -15.70, 1.04, 1.33, 0.0034, 0.7904, 0.0299,
5, -15.30, 2.77, 2.79, 0.0063, 0.7463, 0.0322,
4, -14.70, 2.36, 2.50, 0.0072, 0.8012, 0.0289,
3, -15.50, 2.64, 2.83, 0.0055, 0.7927, 0.0307,
3, -15.60, 3.14, 3.16, 0.0055, 0.7762, 0.0317,
1, -13.40, 0.31, 0.33, 0.0074, 0.7930, 0.0243,
0, -14.60, 0.41, 0.59, 0.0038, 0.7395, 0.0269,
2, -15.10, 2.02, 2.04, 0.0057, 0.7620, 0.0300,
0, -14.20, 0.20, 0.33, 0.0044, 0.8267, 0.0249,
1, -15.70, 2.82, 2.84, 0.0050, 0.7804, 0.0317,
2, -13.60, 0.39, 1.02, 0.0078, 0.7443, 0.0262,
2, -14.20, 0.99, 1.11, 0.0070, 0.8302, 0.0264,
2, -14.80, 1.66, 2.77, 0.0080, 0.7305, 0.0333,
4, -15.40, 2.57, 2.59, 0.0056, 0.7805, 0.0306,
6, -15.10, 3.35, 3.50, 0.0072, 0.8152, 0.0301,
0, -15.20, 0.89, 1.06, 0.0040, 0.7804, 0.0285,
0, 0.00, 0.00, 0.00, 0.0039, 0.8272, 0.0260,
1, -15.20, 1.21, 1.25, 0.0043, 0.7645, 0.0292,
0, -15.80, 5.53, 5.85, 0.0068, 0.8113, 0.0331,
5, -15.00, 2.58, 2.59, 0.0066, 0.7685, 0.0302,
1, -15.60, 1.40, 1.51, 0.0038, 0.7628, 0.0305,
3, -15.40, 2.13, 2.14, 0.0050, 0.7707, 0.0305,
1, -13.90, 0.23, 0.43, 0.0052, 0.7515, 0.0248,
0, -14.30, 0.20, 0.34, 0.0043, 0.8217, 0.0250,
1, -14.20, 0.71, 0.74, 0.0060, 0.7725, 0.0264,
1, -13.50, 0.31, 0.37, 0.0068, 0.8273, 0.0243,
2, -14.80, 1.94, 1.95, 0.0065, 0.7713, 0.0291,
--------------------------------------------------------------------
znad: [0, 5.528, 5.85]
zi: [-15.8, 0, 0]
zw: [0, 5.544, 5.85]
Norm Dist: 0.9997184077771052
2017-10-30 15:53:17,386 Generation 1
2017-10-30 15:53:17,690 Prepare: stator.statorRotor3.slot_width = 0.004342381728482061
2017-10-30 15:53:17,692 Prepare: magnet.magnetSector.magn_width_pct = 0.7731555831235458
2017-10-30 15:53:17,694 Prepare: magnet.magnetSector.magn_shape = 0.029172821188692365
2017-10-30 15:53:17,705 Prepare: stator.statorRotor3.slot_width = 0.006440856616164773
2017-10-30 15:53:17,707 Prepare: magnet.magnetSector.magn_width_pct = 0.7679833947730499
2017-10-30 15:53:17,709 Prepare: magnet.magnetSector.magn_shape = 0.029135173497127416
2017-10-30 15:53:17,720 Prepare: stator.statorRotor3.slot_width = 0.006582937240102828
2017-10-30 15:53:17,723 Prepare: magnet.magnetSector.magn_width_pct = 0.8229058073518954
2017-10-30 15:53:17,726 Prepare: magnet.magnetSector.magn_shape = 0.026298843400736814
2017-10-30 15:53:17,736 Prepare: stator.statorRotor3.slot_width = 0.004116431150214761
2017-10-30 15:53:17,739 Prepare: magnet.magnetSector.magn_width_pct = 0.7732410484350998
2017-10-30 15:53:17,742 Prepare: magnet.magnetSector.magn_shape = 0.02516433646873039
2017-10-30 15:53:17,753 Prepare: stator.statorRotor3.slot_width = 0.004991359669365932
2017-10-30 15:53:17,757 Prepare: magnet.magnetSector.magn_width_pct = 0.7941337945942714
2017-10-30 15:53:17,759 Prepare: magnet.magnetSector.magn_shape = 0.02507517325130309
2017-10-30 15:53:17,770 Prepare: stator.statorRotor3.slot_width = 0.003561040275708325
2017-10-30 15:53:17,773 Prepare: magnet.magnetSector.magn_width_pct = 0.7470068780418616
2017-10-30 15:53:17,776 Prepare: magnet.magnetSector.magn_shape = 0.029861105345969172
2017-10-30 15:53:17,786 Prepare: stator.statorRotor3.slot_width = 0.007267736508772881
2017-10-30 15:53:17,789 Prepare: magnet.magnetSector.magn_width_pct = 0.7654148930358687
2017-10-30 15:53:17,791 Prepare: magnet.magnetSector.magn_shape = 0.025487775616176874
2017-10-30 15:53:17,803 Prepare: stator.statorRotor3.slot_width = 0.003470970189557722
2017-10-30 15:53:17,806 Prepare: magnet.magnetSector.magn_width_pct = 0.7905487981958157
2017-10-30 15:53:17,811 Prepare: magnet.magnetSector.magn_shape = 0.0299557483366556
2017-10-30 15:53:17,822 Prepare: stator.statorRotor3.slot_width = 0.0038425928918056624
2017-10-30 15:53:17,825 Prepare: magnet.magnetSector.magn_width_pct = 0.7786989996191734
2017-10-30 15:53:17,827 Prepare: magnet.magnetSector.magn_shape = 0.028620990668774104
2017-10-30 15:53:17,841 Prepare: stator.statorRotor3.slot_width = 0.007056756806605674
2017-10-30 15:53:17,843 Prepare: magnet.magnetSector.magn_width_pct = 0.7678836518588832
2017-10-30 15:53:17,846 Prepare: magnet.magnetSector.magn_shape = 0.02597671313731732
2017-10-30 15:53:17,859 Prepare: stator.statorRotor3.slot_width = 0.006528368050343179
2017-10-30 15:53:17,863 Prepare: magnet.magnetSector.magn_width_pct = 0.7689466019279034
2017-10-30 15:53:17,865 Prepare: magnet.magnetSector.magn_shape = 0.031607421931880646
2017-10-30 15:53:17,876 Prepare: stator.statorRotor3.slot_width = 0.005635922450180935
2017-10-30 15:53:17,879 Prepare: magnet.magnetSector.magn_width_pct = 0.7767773716987247
2017-10-30 15:53:17,881 Prepare: magnet.magnetSector.magn_shape = 0.029071389836447026
2017-10-30 15:53:17,892 Prepare: stator.statorRotor3.slot_width = 0.00566019418081021
2017-10-30 15:53:17,897 Prepare: magnet.magnetSector.magn_width_pct = 0.7830981503925412
2017-10-30 15:53:17,899 Prepare: magnet.magnetSector.magn_shape = 0.030585587643966936
2017-10-30 15:53:17,910 Prepare: stator.statorRotor3.slot_width = 0.004915286027812089
2017-10-30 15:53:17,914 Prepare: magnet.magnetSector.magn_width_pct = 0.7771282197050112
2017-10-30 15:53:17,917 Prepare: magnet.magnetSector.magn_shape = 0.0315603234556699
2017-10-30 15:53:17,927 Prepare: stator.statorRotor3.slot_width = 0.004358530495848483
2017-10-30 15:53:17,930 Prepare: magnet.magnetSector.magn_width_pct = 0.829943396188013
2017-10-30 15:53:17,933 Prepare: magnet.magnetSector.magn_shape = 0.0253189610495303
2017-10-30 15:53:17,951 Prepare: stator.statorRotor3.slot_width = 0.007017955069263971
2017-10-30 15:53:17,953 Prepare: magnet.magnetSector.magn_width_pct = 0.8244820432638299
2017-10-30 15:53:17,957 Prepare: magnet.magnetSector.magn_shape = 0.02662573436875634
2017-10-30 15:53:17,968 Prepare: stator.statorRotor3.slot_width = 0.003938996565893947
2017-10-30 15:53:17,971 Prepare: magnet.magnetSector.magn_width_pct = 0.7460782742909434
2017-10-30 15:53:17,976 Prepare: magnet.magnetSector.magn_shape = 0.026923994210692682
2017-10-30 15:53:17,989 Prepare: stator.statorRotor3.slot_width = 0.006905007062878828
2017-10-30 15:53:17,994 Prepare: magnet.magnetSector.magn_width_pct = 0.8045364458385674
2017-10-30 15:53:17,996 Prepare: magnet.magnetSector.magn_shape = 0.03316236376779085
2017-10-30 15:53:18,006 Prepare: stator.statorRotor3.slot_width = 0.003923761343815246
2017-10-30 15:53:18,010 Prepare: magnet.magnetSector.magn_width_pct = 0.7806722831400777
2017-10-30 15:53:18,016 Prepare: magnet.magnetSector.magn_shape = 0.03165575414277468
2017-10-30 15:53:18,027 Prepare: stator.statorRotor3.slot_width = 0.005027208115421521
2017-10-30 15:53:18,033 Prepare: magnet.magnetSector.magn_width_pct = 0.826689370392981
2017-10-30 15:53:18,035 Prepare: magnet.magnetSector.magn_shape = 0.02596515309687846
2017-10-30 15:53:18,135 Prepare: stator.statorRotor3.slot_width = 0.004341130713915031
2017-10-30 15:53:18,137 Prepare: magnet.magnetSector.magn_width_pct = 0.830475220798484
2017-10-30 15:53:18,140 Prepare: magnet.magnetSector.magn_shape = 0.026616000931508496
2017-10-30 15:53:18,151 Prepare: stator.statorRotor3.slot_width = 0.0038406841275591195
2017-10-30 15:53:18,158 Prepare: magnet.magnetSector.magn_width_pct = 0.8284040931749509
2017-10-30 15:53:18,161 Prepare: magnet.magnetSector.magn_shape = 0.02519220630086636
2017-10-30 15:53:18,172 Prepare: stator.statorRotor3.slot_width = 0.006907105441759326
2017-10-30 15:53:18,175 Prepare: magnet.magnetSector.magn_width_pct = 0.7423407436335601
2017-10-30 15:53:18,178 Prepare: magnet.magnetSector.magn_shape = 0.0246851314681007
2017-10-30 15:53:18,189 Prepare: stator.statorRotor3.slot_width = 0.003646782184769909
2017-10-30 15:53:18,192 Prepare: magnet.magnetSector.magn_width_pct = 0.827798362102065
2017-10-30 15:53:18,195 Prepare: magnet.magnetSector.magn_shape = 0.027097237233793862
2017-10-30 15:53:18,208 Prepare: stator.statorRotor3.slot_width = 0.007295519487327284
2017-10-30 15:53:18,212 Prepare: magnet.magnetSector.magn_width_pct = 0.7931944547497889
2017-10-30 15:53:18,215 Prepare: magnet.magnetSector.magn_shape = 0.02458735192239566
2017-10-30 15:53:18,230 Prepare: stator.statorRotor3.slot_width = 0.006803754420235131
2017-10-30 15:53:18,233 Prepare: magnet.magnetSector.magn_width_pct = 0.8288048944479173
2017-10-30 15:53:18,235 Prepare: magnet.magnetSector.magn_shape = 0.024169794315650944
2017-10-30 15:53:18,249 Prepare: stator.statorRotor3.slot_width = 0.00692807122179798
2017-10-30 15:53:18,252 Prepare: magnet.magnetSector.magn_width_pct = 0.7617964963636714
2017-10-30 15:53:18,254 Prepare: magnet.magnetSector.magn_shape = 0.03288685625620041
2017-10-30 15:53:18,268 Prepare: stator.statorRotor3.slot_width = 0.003896139595958209
2017-10-30 15:53:18,272 Prepare: magnet.magnetSector.magn_width_pct = 0.8424897199183974
2017-10-30 15:53:18,277 Prepare: magnet.magnetSector.magn_shape = 0.030607769834997217
2017-10-30 15:53:18,288 Prepare: stator.statorRotor3.slot_width = 0.0069771434722954535
2017-10-30 15:53:18,294 Prepare: magnet.magnetSector.magn_width_pct = 0.8303546323185649
2017-10-30 15:53:18,296 Prepare: magnet.magnetSector.magn_shape = 0.026366948691137617
2017-10-30 15:53:18,307 Prepare: stator.statorRotor3.slot_width = 0.004288228212430995
2017-10-30 15:53:18,310 Prepare: magnet.magnetSector.magn_width_pct = 0.8220880796103246
2017-10-30 15:53:18,313 Prepare: magnet.magnetSector.magn_shape = 0.02500883985052758
2017-10-30 15:53:18,323 Prepare: stator.statorRotor3.slot_width = 0.0038883799106715867
2017-10-30 15:53:18,327 Prepare: magnet.magnetSector.magn_width_pct = 0.7790347030743986
2017-10-30 15:53:18,330 Prepare: magnet.magnetSector.magn_shape = 0.02990446250742448
2017-10-30 15:53:18,342 Prepare: stator.statorRotor3.slot_width = 0.004771126109405646
2017-10-30 15:53:18,345 Prepare: magnet.magnetSector.magn_width_pct = 0.808106093403788
2017-10-30 15:53:18,347 Prepare: magnet.magnetSector.magn_shape = 0.029021491615071896
2017-10-30 15:53:18,610 submit cluster 194
2017-10-30 15:55:35,874 status 29: C
2017-10-30 15:55:35,882 status 28: C
2017-10-30 15:55:35,884 status 25: C
2017-10-30 15:55:35,889 status 22: C
2017-10-30 15:55:35,893 status 30: C
2017-10-30 15:55:35,897 status 31: C
2017-10-30 15:55:35,900 status 27: C
2017-10-30 15:55:35,903 status 21: C
2017-10-30 15:55:35,906 status 20: C
2017-10-30 15:55:35,909 status 19: C
2017-10-30 15:55:35,912 status 16: C
2017-10-30 15:55:35,924 status 17: C
2017-10-30 15:55:35,928 status 9: C
2017-10-30 15:55:35,931 status 24: C
2017-10-30 15:55:35,934 status 18: C
2017-10-30 15:55:35,936 status 11: C
2017-10-30 15:55:35,942 status 26: C
2017-10-30 15:55:35,945 status 6: C
2017-10-30 15:55:35,949 status 5: C
2017-10-30 15:55:35,952 status 4: C
2017-10-30 15:55:35,954 status 7: C
2017-10-30 15:55:35,959 status 14: C
2017-10-30 15:55:35,962 status 15: C
2017-10-30 15:55:35,965 status 8: C
2017-10-30 15:55:35,968 status 10: C
2017-10-30 15:55:35,971 status 3: C
2017-10-30 15:55:35,976 status 2: C
2017-10-30 15:55:35,982 status 1: C
2017-10-30 15:55:35,986 status 0: C
2017-10-30 15:55:35,989 status 12: C
2017-10-30 15:55:35,992 status 13: C
2017-10-30 15:55:35,997 finished cluster 194
2017-10-30 15:55:36,001 Reading /home/tar/opti/0/PM-4-130_001.BATCH
2017-10-30 15:55:36,033 Reading /home/tar/opti/1/PM-4-130_001.BATCH
2017-10-30 15:55:36,061 Reading /home/tar/opti/2/PM-4-130_001.BATCH
2017-10-30 15:55:36,086 Reading /home/tar/opti/3/PM-4-130_001.BATCH
2017-10-30 15:55:36,115 Reading /home/tar/opti/4/PM-4-130_001.BATCH
2017-10-30 15:55:36,146 Reading /home/tar/opti/5/PM-4-130_001.BATCH
2017-10-30 15:55:36,170 Reading /home/tar/opti/6/PM-4-130_001.BATCH
2017-10-30 15:55:36,195 Reading /home/tar/opti/7/PM-4-130_001.BATCH
2017-10-30 15:55:36,220 Reading /home/tar/opti/8/PM-4-130_001.BATCH
2017-10-30 15:55:36,240 Reading /home/tar/opti/9/PM-4-130_001.BATCH
2017-10-30 15:55:36,259 Reading /home/tar/opti/10/PM-4-130_001.BATCH
2017-10-30 15:55:36,281 Reading /home/tar/opti/11/PM-4-130_001.BATCH
2017-10-30 15:55:36,297 Reading /home/tar/opti/12/PM-4-130_001.BATCH
2017-10-30 15:55:36,322 Reading /home/tar/opti/13/PM-4-130_001.BATCH
2017-10-30 15:55:36,343 Reading /home/tar/opti/14/PM-4-130_001.BATCH
2017-10-30 15:55:36,362 Reading /home/tar/opti/15/PM-4-130_001.BATCH
2017-10-30 15:55:36,378 Reading /home/tar/opti/16/PM-4-130_001.BATCH
2017-10-30 15:55:36,397 Reading /home/tar/opti/17/PM-4-130_001.BATCH
2017-10-30 15:55:36,419 Reading /home/tar/opti/18/PM-4-130_001.BATCH
2017-10-30 15:55:36,435 Reading /home/tar/opti/19/PM-4-130_001.BATCH
2017-10-30 15:55:36,456 Reading /home/tar/opti/20/PM-4-130_001.BATCH
2017-10-30 15:55:36,475 Reading /home/tar/opti/21/PM-4-130_001.BATCH
2017-10-30 15:55:36,498 Reading /home/tar/opti/22/PM-4-130_001.BATCH
2017-10-30 15:55:36,519 Task 55331226-1edb-408b-ba4a-95dcfec6ce2c-23 failed with status None
2017-10-30 15:55:36,522 Reading /home/tar/opti/24/PM-4-130_001.BATCH
2017-10-30 15:55:36,544 Reading /home/tar/opti/25/PM-4-130_001.BATCH
2017-10-30 15:55:36,560 Reading /home/tar/opti/26/PM-4-130_001.BATCH
2017-10-30 15:55:36,575 Reading /home/tar/opti/27/PM-4-130_001.BATCH
2017-10-30 15:55:36,591 Reading /home/tar/opti/28/PM-4-130_001.BATCH
2017-10-30 15:55:36,608 Reading /home/tar/opti/29/PM-4-130_001.BATCH
2017-10-30 15:55:36,623 Reading /home/tar/opti/30/PM-4-130_001.BATCH
2017-10-30 15:55:36,639 Reading /home/tar/opti/31/PM-4-130_001.BATCH
2017-10-30 15:55:36,686 Generation: 1
rank torque[-1]ripple ripple slot_width magn_width_pctmagn_shape
0, 0.00, 0.00, 0.00, 0.0039, 0.8272, 0.0260,
0, 0.00, 0.00, 0.00, 0.0036, 0.8278, 0.0271,
0, -15.90, 1.56, 1.89, 0.0039, 0.8425, 0.0306,
0, -15.70, 1.04, 1.33, 0.0034, 0.7904, 0.0299,
0, -14.20, 0.20, 0.33, 0.0044, 0.8267, 0.0249,
0, -14.20, 0.23, 0.29, 0.0041, 0.7732, 0.0252,
0, -14.80, 0.49, 0.69, 0.0043, 0.8305, 0.0266,
0, -15.20, 0.88, 1.07, 0.0038, 0.7787, 0.0286,
0, -15.20, 0.89, 1.06, 0.0040, 0.7804, 0.0285,
0, -15.30, 1.00, 1.14, 0.0036, 0.7470, 0.0299,
0, -14.60, 0.46, 0.57, 0.0039, 0.7461, 0.0269,
0, -14.40, 0.19, 0.34, 0.0038, 0.8284, 0.0252,
0, -14.60, 0.41, 0.59, 0.0038, 0.7395, 0.0269,
0, -14.30, 0.21, 0.33, 0.0043, 0.8221, 0.0250,
1, -13.40, 0.31, 0.33, 0.0074, 0.7930, 0.0243,
1, -14.30, 0.20, 0.34, 0.0043, 0.8217, 0.0250,
1, -14.40, 0.26, 0.40, 0.0044, 0.8299, 0.0253,
1, -15.90, 2.03, 2.20, 0.0039, 0.7807, 0.0317,
1, -14.50, 0.47, 0.63, 0.0050, 0.8267, 0.0260,
1, -15.30, 1.24, 1.34, 0.0043, 0.7732, 0.0292,
1, -15.70, 1.08, 1.38, 0.0035, 0.7905, 0.0300,
1, -15.20, 1.21, 1.25, 0.0043, 0.7645, 0.0292,
2, -15.80, 5.53, 5.85, 0.0068, 0.8113, 0.0331,
2, -13.90, 0.23, 0.43, 0.0052, 0.7515, 0.0248,
2, -15.70, 2.66, 2.67, 0.0049, 0.7771, 0.0316,
2, -13.50, 0.28, 0.35, 0.0068, 0.8288, 0.0242,
2, -15.50, 1.29, 1.49, 0.0039, 0.7790, 0.0299,
2, -14.20, 0.71, 0.74, 0.0060, 0.7725, 0.0264,
2, -15.60, 1.40, 1.51, 0.0038, 0.7628, 0.0305,
2, -14.10, 0.29, 0.36, 0.0050, 0.7941, 0.0251,
3, -15.80, 5.54, 5.85, 0.0069, 0.8392, 0.0328,
3, -13.70, 0.51, 0.59, 0.0072, 0.7668, 0.0255,
--------------------------------------------------------------------
znad: [0, 1.562, 1.8900000000000006]
zi: [-15.9, 0, 0]
zw: [0, 5.544, 5.85]
Norm Dist: 0.902495757846741
2017-10-30 15:55:36,689 Generation 2
2017-10-30 15:55:36,973 Prepare: stator.statorRotor3.slot_width = 0.004589563337245313
2017-10-30 15:55:36,975 Prepare: magnet.magnetSector.magn_width_pct = 0.8303656221676661
2017-10-30 15:55:36,978 Prepare: magnet.magnetSector.magn_shape = 0.024895787542851048
2017-10-30 15:55:36,991 Prepare: stator.statorRotor3.slot_width = 0.005046252971286903
2017-10-30 15:55:36,998 Prepare: magnet.magnetSector.magn_width_pct = 0.8211307962890533
2017-10-30 15:55:37,000 Prepare: magnet.magnetSector.magn_shape = 0.02609497089680509
2017-10-30 15:55:37,013 Prepare: stator.statorRotor3.slot_width = 0.004262205770564666
2017-10-30 15:55:37,016 Prepare: magnet.magnetSector.magn_width_pct = 0.7908983037266613
2017-10-30 15:55:37,018 Prepare: magnet.magnetSector.magn_shape = 0.030203359083755304
2017-10-30 15:55:37,029 Prepare: stator.statorRotor3.slot_width = 0.0034786513244949567
2017-10-30 15:55:37,032 Prepare: magnet.magnetSector.magn_width_pct = 0.8266162025691883
2017-10-30 15:55:37,034 Prepare: magnet.magnetSector.magn_shape = 0.026812722084646915
2017-10-30 15:55:37,045 Prepare: stator.statorRotor3.slot_width = 0.003932514741775509
2017-10-30 15:55:37,047 Prepare: magnet.magnetSector.magn_width_pct = 0.7472566391098007
2017-10-30 15:55:37,050 Prepare: magnet.magnetSector.magn_shape = 0.02884142030599393
2017-10-30 15:55:37,061 Prepare: stator.statorRotor3.slot_width = 0.0036247869737482804
2017-10-30 15:55:37,064 Prepare: magnet.magnetSector.magn_width_pct = 0.7763641718682073
2017-10-30 15:55:37,067 Prepare: magnet.magnetSector.magn_shape = 0.030963669228916652
2017-10-30 15:55:37,079 Prepare: stator.statorRotor3.slot_width = 0.004273332005677925
2017-10-30 15:55:37,082 Prepare: magnet.magnetSector.magn_width_pct = 0.7703218023527515
2017-10-30 15:55:37,085 Prepare: magnet.magnetSector.magn_shape = 0.02892598587085431
2017-10-30 15:55:37,096 Prepare: stator.statorRotor3.slot_width = 0.004466730854660704
2017-10-30 15:55:37,098 Prepare: magnet.magnetSector.magn_width_pct = 0.8206361630250396
2017-10-30 15:55:37,099 Prepare: magnet.magnetSector.magn_shape = 0.024711187429744683
2017-10-30 15:55:37,106 Prepare: stator.statorRotor3.slot_width = 0.0040114739089003836
2017-10-30 15:55:37,108 Prepare: magnet.magnetSector.magn_width_pct = 0.7805814985079719
2017-10-30 15:55:37,109 Prepare: magnet.magnetSector.magn_shape = 0.02989119295529288
2017-10-30 15:55:37,116 Prepare: stator.statorRotor3.slot_width = 0.0039051201852170485
2017-10-30 15:55:37,118 Prepare: magnet.magnetSector.magn_width_pct = 0.8235031739934516
2017-10-30 15:55:37,120 Prepare: magnet.magnetSector.magn_shape = 0.026187540621916465
2017-10-30 15:55:37,127 Prepare: stator.statorRotor3.slot_width = 0.004291213914498079
2017-10-30 15:55:37,131 Prepare: magnet.magnetSector.magn_width_pct = 0.7665978059065206
2017-10-30 15:55:37,134 Prepare: magnet.magnetSector.magn_shape = 0.029205233714980995
2017-10-30 15:55:37,145 Prepare: stator.statorRotor3.slot_width = 0.00425338533072765
2017-10-30 15:55:37,148 Prepare: magnet.magnetSector.magn_width_pct = 0.8243043907274614
2017-10-30 15:55:37,151 Prepare: magnet.magnetSector.magn_shape = 0.024837350351501534
2017-10-30 15:55:37,163 Prepare: stator.statorRotor3.slot_width = 0.003755554538732678
2017-10-30 15:55:37,165 Prepare: magnet.magnetSector.magn_width_pct = 0.8288501816461198
2017-10-30 15:55:37,169 Prepare: magnet.magnetSector.magn_shape = 0.02712221821820464
2017-10-30 15:55:37,185 Prepare: stator.statorRotor3.slot_width = 0.0036445478495032344
2017-10-30 15:55:37,188 Prepare: magnet.magnetSector.magn_width_pct = 0.7641819146370664
2017-10-30 15:55:37,191 Prepare: magnet.magnetSector.magn_shape = 0.030399781063692764
2017-10-30 15:55:37,203 Prepare: stator.statorRotor3.slot_width = 0.0040466850076293
2017-10-30 15:55:37,206 Prepare: magnet.magnetSector.magn_width_pct = 0.7829958253606173
2017-10-30 15:55:37,212 Prepare: magnet.magnetSector.magn_shape = 0.025278669910865473
2017-10-30 15:55:37,224 Prepare: stator.statorRotor3.slot_width = 0.0041671052495465995
2017-10-30 15:55:37,227 Prepare: magnet.magnetSector.magn_width_pct = 0.8323932700779197
2017-10-30 15:55:37,230 Prepare: magnet.magnetSector.magn_shape = 0.026189201993944915
2017-10-30 15:55:37,241 Prepare: stator.statorRotor3.slot_width = 0.004456682315605788
2017-10-30 15:55:37,244 Prepare: magnet.magnetSector.magn_width_pct = 0.7744513963329571
2017-10-30 15:55:37,247 Prepare: magnet.magnetSector.magn_shape = 0.02515018496897878
2017-10-30 15:55:37,263 Prepare: stator.statorRotor3.slot_width = 0.004119941681930533
2017-10-30 15:55:37,268 Prepare: magnet.magnetSector.magn_width_pct = 0.8322299273439336
2017-10-30 15:55:37,271 Prepare: magnet.magnetSector.magn_shape = 0.024985730521708674
2017-10-30 15:55:37,285 Prepare: stator.statorRotor3.slot_width = 0.004019642706811965
2017-10-30 15:55:37,290 Prepare: magnet.magnetSector.magn_width_pct = 0.7828574181112595
2017-10-30 15:55:37,292 Prepare: magnet.magnetSector.magn_shape = 0.025502586798881084
2017-10-30 15:55:37,303 Prepare: stator.statorRotor3.slot_width = 0.004352121653483422
2017-10-30 15:55:37,307 Prepare: magnet.magnetSector.magn_width_pct = 0.8301949598060092
2017-10-30 15:55:37,309 Prepare: magnet.magnetSector.magn_shape = 0.028173926417801667
2017-10-30 15:55:37,317 Prepare: stator.statorRotor3.slot_width = 0.004395229863627082
2017-10-30 15:55:37,319 Prepare: magnet.magnetSector.magn_width_pct = 0.8295447724856246
2017-10-30 15:55:37,322 Prepare: magnet.magnetSector.magn_shape = 0.026875774366942416
2017-10-30 15:55:37,329 Prepare: stator.statorRotor3.slot_width = 0.0039102071249637075
2017-10-30 15:55:37,330 Prepare: magnet.magnetSector.magn_width_pct = 0.7480250025503625
2017-10-30 15:55:37,332 Prepare: magnet.magnetSector.magn_shape = 0.025664524572548596
2017-10-30 15:55:37,340 Prepare: stator.statorRotor3.slot_width = 0.0030407922993834356
2017-10-30 15:55:37,342 Prepare: magnet.magnetSector.magn_width_pct = 0.7892568594136014
2017-10-30 15:55:37,344 Prepare: magnet.magnetSector.magn_shape = 0.024346190026544787
2017-10-30 15:55:37,351 Prepare: stator.statorRotor3.slot_width = 0.0079048081389641
2017-10-30 15:55:37,352 Prepare: magnet.magnetSector.magn_width_pct = 0.7904080267812633
2017-10-30 15:55:37,354 Prepare: magnet.magnetSector.magn_shape = 0.0298401717017811
2017-10-30 15:55:37,361 Prepare: stator.statorRotor3.slot_width = 0.004993951576285184
2017-10-30 15:55:37,362 Prepare: magnet.magnetSector.magn_width_pct = 0.796774900421927
2017-10-30 15:55:37,366 Prepare: magnet.magnetSector.magn_shape = 0.028461031887666036
2017-10-30 15:55:37,376 Prepare: stator.statorRotor3.slot_width = 0.003752470949581941
2017-10-30 15:55:37,379 Prepare: magnet.magnetSector.magn_width_pct = 0.7805312600992703
2017-10-30 15:55:37,381 Prepare: magnet.magnetSector.magn_shape = 0.02514178379366938
2017-10-30 15:55:37,392 Prepare: stator.statorRotor3.slot_width = 0.00406233740754587
2017-10-30 15:55:37,396 Prepare: magnet.magnetSector.magn_width_pct = 0.7440033185636281
2017-10-30 15:55:37,399 Prepare: magnet.magnetSector.magn_shape = 0.02689311269711905
2017-10-30 15:55:37,411 Prepare: stator.statorRotor3.slot_width = 0.003774575829307958
2017-10-30 15:55:37,413 Prepare: magnet.magnetSector.magn_width_pct = 0.778462917024237
2017-10-30 15:55:37,417 Prepare: magnet.magnetSector.magn_shape = 0.02866304941431668
2017-10-30 15:55:37,430 Prepare: stator.statorRotor3.slot_width = 0.0034567395668782903
2017-10-30 15:55:37,434 Prepare: magnet.magnetSector.magn_width_pct = 0.78808646097444
2017-10-30 15:55:37,436 Prepare: magnet.magnetSector.magn_shape = 0.02968259363560604
2017-10-30 15:55:37,448 Prepare: stator.statorRotor3.slot_width = 0.004331460636277316
2017-10-30 15:55:37,452 Prepare: magnet.magnetSector.magn_width_pct = 0.8311689413298745
2017-10-30 15:55:37,454 Prepare: magnet.magnetSector.magn_shape = 0.02623823658879594
2017-10-30 15:55:37,475 Prepare: stator.statorRotor3.slot_width = 0.0039744662788924
2017-10-30 15:55:37,478 Prepare: magnet.magnetSector.magn_width_pct = 0.8240795912639517
2017-10-30 15:55:37,481 Prepare: magnet.magnetSector.magn_shape = 0.025060688728128097
2017-10-30 15:55:37,493 Prepare: stator.statorRotor3.slot_width = 0.0035654359002621028
2017-10-30 15:55:37,496 Prepare: magnet.magnetSector.magn_width_pct = 0.7454842001308586
2017-10-30 15:55:37,498 Prepare: magnet.magnetSector.magn_shape = 0.029924702256576678
2017-10-30 15:55:37,794 submit cluster 195
2017-10-30 15:58:37,459 status 31: C
2017-10-30 15:58:37,462 status 28: C
2017-10-30 15:58:37,464 status 27: C
2017-10-30 15:58:37,467 status 22: C
2017-10-30 15:58:37,470 status 30: C
2017-10-30 15:58:37,472 status 23: C
2017-10-30 15:58:37,474 status 26: C
2017-10-30 15:58:37,477 status 25: C
2017-10-30 15:58:37,479 status 24: C
2017-10-30 15:58:37,483 status 17: C
2017-10-30 15:58:37,486 status 20: C
2017-10-30 15:58:37,488 status 19: C
2017-10-30 15:58:37,491 status 21: C
2017-10-30 15:58:37,493 status 16: C
2017-10-30 15:58:37,496 status 18: C
2017-10-30 15:58:37,498 status 11: C
2017-10-30 15:58:37,500 status 10: C
2017-10-30 15:58:37,502 status 12: C
2017-10-30 15:58:37,504 status 7: C
2017-10-30 15:58:37,507 status 4: C
2017-10-30 15:58:37,509 status 15: C
2017-10-30 15:58:37,513 status 6: C
2017-10-30 15:58:37,515 status 5: C
2017-10-30 15:58:37,518 status 0: C
2017-10-30 15:58:37,521 status 9: C
2017-10-30 15:58:37,524 status 14: C
2017-10-30 15:58:37,527 status 8: C
2017-10-30 15:58:37,530 status 1: C
2017-10-30 15:58:37,532 status 3: C
2017-10-30 15:58:37,535 status 13: C
2017-10-30 15:58:37,537 status 2: C
2017-10-30 15:58:37,540 finished cluster 195
2017-10-30 15:58:37,543 Reading /home/tar/opti/0/PM-4-130_001.BATCH
2017-10-30 15:58:37,572 Reading /home/tar/opti/1/PM-4-130_001.BATCH
2017-10-30 15:58:37,597 Reading /home/tar/opti/2/PM-4-130_001.BATCH
2017-10-30 15:58:37,623 Reading /home/tar/opti/3/PM-4-130_001.BATCH
2017-10-30 15:58:37,647 Reading /home/tar/opti/4/PM-4-130_001.BATCH
2017-10-30 15:58:37,677 Reading /home/tar/opti/5/PM-4-130_001.BATCH
2017-10-30 15:58:37,698 Reading /home/tar/opti/6/PM-4-130_001.BATCH
2017-10-30 15:58:37,714 Reading /home/tar/opti/7/PM-4-130_001.BATCH
2017-10-30 15:58:37,735 Reading /home/tar/opti/8/PM-4-130_001.BATCH
2017-10-30 15:58:37,758 Reading /home/tar/opti/9/PM-4-130_001.BATCH
2017-10-30 15:58:37,776 Reading /home/tar/opti/10/PM-4-130_001.BATCH
2017-10-30 15:58:37,794 Reading /home/tar/opti/11/PM-4-130_001.BATCH
2017-10-30 15:58:37,810 Reading /home/tar/opti/12/PM-4-130_001.BATCH
2017-10-30 15:58:37,827 Reading /home/tar/opti/13/PM-4-130_001.BATCH
2017-10-30 15:58:37,846 Reading /home/tar/opti/14/PM-4-130_001.BATCH
2017-10-30 15:58:37,918 Reading /home/tar/opti/15/PM-4-130_001.BATCH
2017-10-30 15:58:37,936 Reading /home/tar/opti/16/PM-4-130_001.BATCH
2017-10-30 15:58:37,958 Reading /home/tar/opti/17/PM-4-130_001.BATCH
2017-10-30 15:58:37,974 Reading /home/tar/opti/18/PM-4-130_001.BATCH
2017-10-30 15:58:37,990 Reading /home/tar/opti/19/PM-4-130_001.BATCH
2017-10-30 15:58:38,007 Reading /home/tar/opti/20/PM-4-130_001.BATCH
2017-10-30 15:58:38,024 Reading /home/tar/opti/21/PM-4-130_001.BATCH
2017-10-30 15:58:38,043 Reading /home/tar/opti/22/PM-4-130_001.BATCH
2017-10-30 15:58:38,062 Reading /home/tar/opti/23/PM-4-130_001.BATCH
2017-10-30 15:58:38,079 Reading /home/tar/opti/24/PM-4-130_001.BATCH
2017-10-30 15:58:38,095 Reading /home/tar/opti/25/PM-4-130_001.BATCH
2017-10-30 15:58:38,111 Reading /home/tar/opti/26/PM-4-130_001.BATCH
2017-10-30 15:58:38,128 Reading /home/tar/opti/27/PM-4-130_001.BATCH
2017-10-30 15:58:38,145 Reading /home/tar/opti/28/PM-4-130_001.BATCH
2017-10-30 15:58:38,171 Task 0480e208-40ce-4c5f-99a8-a2a855aa04f2-29 failed with status None
2017-10-30 15:58:38,175 Reading /home/tar/opti/30/PM-4-130_001.BATCH
2017-10-30 15:58:38,203 Reading /home/tar/opti/31/PM-4-130_001.BATCH
2017-10-30 15:58:38,249 Generation: 2
rank torque[-1]ripple ripple slot_width magn_width_pctmagn_shape
0, 0.00, 0.00, 0.00, 0.0039, 0.8272, 0.0260,
0, 0.00, 0.00, 0.00, 0.0036, 0.8278, 0.0271,
0, -15.90, 1.56, 1.89, 0.0039, 0.8425, 0.0306,
0, -15.80, 1.55, 1.76, 0.0036, 0.7764, 0.0310,
0, 0.00, 0.00, 0.00, 0.0043, 0.8312, 0.0262,
0, -14.10, 0.08, 0.15, 0.0030, 0.7893, 0.0243,
0, -14.40, 0.19, 0.34, 0.0038, 0.8284, 0.0252,
0, -15.70, 1.04, 1.33, 0.0034, 0.7904, 0.0299,
0, -15.10, 0.86, 0.94, 0.0039, 0.7473, 0.0288,
0, -15.00, 0.35, 0.61, 0.0035, 0.8266, 0.0268,
0, -15.30, 1.00, 1.14, 0.0036, 0.7455, 0.0299,
0, -15.60, 0.99, 1.29, 0.0035, 0.7881, 0.0297,
0, -14.70, 0.33, 0.54, 0.0039, 0.8235, 0.0262,
0, -15.20, 0.87, 1.06, 0.0038, 0.7785, 0.0287,
0, -14.30, 0.20, 0.27, 0.0038, 0.7805, 0.0251,
0, -14.30, 0.18, 0.32, 0.0040, 0.8241, 0.0251,
0, -14.20, 0.18, 0.31, 0.0043, 0.8243, 0.0248,
1, -14.20, 0.23, 0.29, 0.0041, 0.7732, 0.0252,
1, -15.90, 2.03, 2.20, 0.0039, 0.7807, 0.0317,
1, -14.10, 0.18, 0.30, 0.0045, 0.8206, 0.0247,
1, -15.70, 1.08, 1.38, 0.0035, 0.7905, 0.0300,
1, -15.30, 1.00, 1.14, 0.0036, 0.7470, 0.0299,
1, -15.20, 0.89, 1.06, 0.0040, 0.7804, 0.0285,
1, -14.80, 0.49, 0.69, 0.0043, 0.8305, 0.0266,
1, -15.00, 0.46, 0.71, 0.0038, 0.8289, 0.0271,
1, -15.20, 0.88, 1.07, 0.0038, 0.7787, 0.0286,
1, -14.70, 0.37, 0.56, 0.0042, 0.8324, 0.0262,
1, -14.30, 0.19, 0.32, 0.0041, 0.8322, 0.0250,
1, -14.40, 0.27, 0.35, 0.0040, 0.7829, 0.0255,
1, -14.40, 0.26, 0.40, 0.0044, 0.8299, 0.0253,
1, -14.30, 0.24, 0.31, 0.0040, 0.7830, 0.0253,
2, -14.30, 0.20, 0.34, 0.0043, 0.8217, 0.0250,
--------------------------------------------------------------------
znad: [0, 1.562, 1.8900000000000006]
zi: [-15.9, 0, 0]
zw: [0, 2.028, 2.1999999999999993]
Norm Dist: 0.9943667572134921
2017-10-30 15:58:38,251 finished
In [17]:
pl.plot([t for t in results['f'][0] if t>0], [p for p in results['f'][2] if p>0], 'o')
pl.show()
Content source: SEMAFORInformatik/femagtools
Similar notebooks: