In this project, you'll build your first neural network and use it to predict daily bike rental ridership. We've provided some of the code, but left the implementation of the neural network up to you (for the most part). After you've submitted this project, feel free to explore the data and the model more.
In [6]:
%matplotlib inline
%config InlineBackend.figure_format = 'retina'
import numpy as np
import pandas as pd
import matplotlib.pyplot as plt
import sys
A critical step in working with neural networks is preparing the data correctly. Variables on different scales make it difficult for the network to efficiently learn the correct weights. Below, we've written the code to load and prepare the data. You'll learn more about this soon!
In [7]:
data_path = 'Bike-Sharing-Dataset/hour.csv'
rides = pd.read_csv(data_path)
In [8]:
rides.head()
Out[8]:
This dataset has the number of riders for each hour of each day from January 1 2011 to December 31 2012. The number of riders is split between casual and registered, summed up in the cnt column. You can see the first few rows of the data above.
Below is a plot showing the number of bike riders over the first 10 days in the data set. You can see the hourly rentals here. This data is pretty complicated! The weekends have lower over all ridership and there are spikes when people are biking to and from work during the week. Looking at the data above, we also have information about temperature, humidity, and windspeed, all of these likely affecting the number of riders. You'll be trying to capture all this with your model.
In [9]:
rides[:24*10].plot(x='dteday', y='cnt')
Out[9]:
In [10]:
dummy_fields = ['season', 'weathersit', 'mnth', 'hr', 'weekday']
for each in dummy_fields:
dummies = pd.get_dummies(rides[each], prefix=each, drop_first=False)
rides = pd.concat([rides, dummies], axis=1)
fields_to_drop = ['instant', 'dteday', 'season', 'weathersit',
'weekday', 'atemp', 'mnth', 'workingday', 'hr']
data = rides.drop(fields_to_drop, axis=1)
data.head()
Out[10]:
To make training the network easier, we'll standardize each of the continuous variables. That is, we'll shift and scale the variables such that they have zero mean and a standard deviation of 1.
The scaling factors are saved so we can go backwards when we use the network for predictions.
In [11]:
quant_features = ['casual', 'registered', 'cnt', 'temp', 'hum', 'windspeed']
# Store scalings in a dictionary so we can convert back later
scaled_features = {}
for each in quant_features:
mean, std = data[each].mean(), data[each].std()
scaled_features[each] = [mean, std]
data.loc[:, each] = (data[each] - mean)/std
In [12]:
# Save the last 21 days
test_data = data[-21*24:]
data = data[:-21*24]
# Separate the data into features and targets
target_fields = ['cnt', 'casual', 'registered']
features, targets = data.drop(target_fields, axis=1), data[target_fields]
test_features, test_targets = test_data.drop(target_fields, axis=1), test_data[target_fields]
We'll split the data into two sets, one for training and one for validating as the network is being trained. Since this is time series data, we'll train on historical data, then try to predict on future data (the validation set).
In [13]:
# Hold out the last 60 days of the remaining data as a validation set
train_features, train_targets = features[:-60*24], targets[:-60*24]
val_features, val_targets = features[-60*24:], targets[-60*24:]
Below you'll build your network. We've built out the structure and the backwards pass. You'll implement the forward pass through the network. You'll also set the hyperparameters: the learning rate, the number of hidden units, and the number of training passes.
The network has two layers, a hidden layer and an output layer. The hidden layer will use the sigmoid function for activations. The output layer has only one node and is used for the regression, the output of the node is the same as the input of the node. That is, the activation function is $f(x)=x$. A function that takes the input signal and generates an output signal, but takes into account the threshold, is called an activation function. We work through each layer of our network calculating the outputs for each neuron. All of the outputs from one layer become inputs to the neurons on the next layer. This process is called forward propagation.
We use the weights to propagate signals forward from the input to the output layers in a neural network. We use the weights to also propagate error backwards from the output back into the network to update our weights. This is called backpropagation.
Hint: You'll need the derivative of the output activation function ($f(x) = x$) for the backpropagation implementation. If you aren't familiar with calculus, this function is equivalent to the equation $y = x$. What is the slope of that equation? That is the derivative of $f(x)$.
Below, you have these tasks:
self.activation_function in __init__ to your sigmoid function.train method.train method, including calculating the output error.run method.
In [14]:
def sigmoid(x):
return 1 / (1 + np.exp(-x))
In [15]:
class NeuralNetwork(object):
def __init__(self, input_nodes, hidden_nodes, output_nodes, learning_rate):
'''Set number of nodes in input, hidden and output layers.'''
self.input_nodes = input_nodes
self.hidden_nodes = hidden_nodes
self.output_nodes = output_nodes
# Initialize weights
self.weights_input_to_hidden = np.random.normal(0.0, self.hidden_nodes**-0.5,
(self.hidden_nodes, self.input_nodes))
# print("input_hidden.shape",self.weights_input_to_hidden.shape)
self.weights_hidden_to_output = np.random.normal(0.0, self.output_nodes**-0.5,
(self.output_nodes, self.hidden_nodes))
self.lr = learning_rate
self.learning_rate = learning_rate
#### Set this to your implemented sigmoid function ####
# Activation function is the sigmoid function
self.activation_function = sigmoid
self.del_w_hidden_output = np.zeros(self.weights_input_to_hidden.shape)
self.del_w_input_hidden = np.zeros(self.weights_hidden_to_output.shape)
def train(self, inputs_list, targets_list):
# Convert inputs list to 2d array
inputs = np.array(inputs_list, ndmin=2).T
targets = np.array(targets_list, ndmin=2).T
#### Implement the forward pass here ####
### Forward pass ###
# TODO: Hidden layer
# print("weights_input_hidden.shape", self.weights_input_to_hidden.shape, "inputs.shape",inputs.shape)
hidden_inputs = np.dot(self.weights_input_to_hidden, inputs)
# print("hidden_inputs.shape:", hidden_inputs.shape)
# signals into hidden layer
hidden_outputs = self.activation_function(hidden_inputs)
# print("hidden_outputs.shape:", hidden_outputs.shape)
# signals from hidden layer
# TODO: Output layer
# print("hidden_outputs.shape:",hidden_outputs.shape, "weights_hidden_output.shape", self.weights_hidden_to_output.shape)
final_inputs = np.dot(self.weights_hidden_to_output, hidden_outputs)
# signals into final output layer
final_outputs = final_inputs
# signals from final output layer
#### Implement the backward pass here ####
### Backward pass ###
# TODO: Output error
# print("targets.shape:",targets.shape, "final_outputs.shape", final_outputs.shape)
output_errors = targets - final_outputs
# Output layer error is the difference between desired target and actual output.
# TODO: Backpropagated error
# print("output_errors.shape:", output_errors.shape, "weights_hidden_to_output.shape", self.weights_hidden_to_output.shape)
hidden_errors = np.dot(output_errors, self.weights_hidden_to_output).T
# print("hidden_errors.shape", hidden_errors.shape)
# errors propagated to the hidden layer
hidden_grad = hidden_errors * hidden_outputs * (1 - hidden_outputs)
# print("hidden_grad.shape", hidden_grad.shape)
# hidden layer gradients
# TODO: Update the weights
self.weights_hidden_to_output += self.lr * output_errors * hidden_outputs.T
# update hidden-to-output weights with gradient descent step
self.weights_input_to_hidden += self.lr * hidden_grad * inputs.T
# update input-to-hidden weights with gradient descent step
def run(self, inputs_list):
# Run a forward pass through the network
inputs = np.array(inputs_list, ndmin=2).T
#### Implement the forward pass here ####
### Forward pass ###
# TODO: Hidden layer
hidden_inputs = np.dot(self.weights_input_to_hidden, inputs)
# signals into hidden layer
hidden_outputs = self.activation_function(hidden_inputs)
# signals from hidden layer
# TODO: Output layer
final_inputs = np.dot(self.weights_hidden_to_output, hidden_outputs)
# signals into final output layer
final_outputs = final_inputs
# signals from final output layer
return final_outputs
In [16]:
def MSE(y, Y):
return np.mean((y-Y)**2)
Here you'll set the hyperparameters for the network. The strategy here is to find hyperparameters such that the error on the training set is low, but you're not overfitting to the data. If you train the network too long or have too many hidden nodes, it can become overly specific to the training set and will fail to generalize to the validation set. That is, the loss on the validation set will start increasing as the training set loss drops.
You'll also be using a method know as Stochastic Gradient Descent (SGD) to train the network. The idea is that for each training pass, you grab a random sample of the data instead of using the whole data set. You use many more training passes than with normal gradient descent, but each pass is much faster. This ends up training the network more efficiently. You'll learn more about SGD later.
This is the number of times the dataset will pass through the network, each time updating the weights. As the number of epochs increases, the network becomes better and better at predicting the targets in the training set. You'll need to choose enough epochs to train the network well but not too many or you'll be overfitting.
This scales the size of weight updates. If this is too big, the weights tend to explode and the network fails to fit the data. A good choice to start at is 0.1. If the network has problems fitting the data, try reducing the learning rate. Note that the lower the learning rate, the smaller the steps are in the weight updates and the longer it takes for the neural network to converge.
The more hidden nodes you have, the more accurate predictions the model will make. Try a few different numbers and see how it affects the performance. You can look at the losses dictionary for a metric of the network performance. If the number of hidden units is too low, then the model won't have enough space to learn and if it is too high there are too many options for the direction that the learning can take. The trick here is to find the right balance in number of hidden units you choose.
In [17]:
### Set the hyperparameters here ###
epochs = 1000
learning_rate = 0.01
hidden_nodes = 2
output_nodes = 1
N_i = train_features.shape[1]
In [18]:
def neural_network_training(N_i=N_i, hidden_nodes=hidden_nodes, output_nodes=output_nodes, learning_rate=learning_rate):
network = NeuralNetwork(N_i, hidden_nodes, output_nodes, learning_rate)
losses = {'train':[], 'validation':[]}
for e in range(epochs):
# Go through a random batch of 128 records from the training data set
batch = np.random.choice(train_features.index, size=128)
for record, target in zip(train_features.ix[batch].values,
train_targets.ix[batch]['cnt']):
network.train(record, target)
# Printing out the training progress
train_loss = MSE(network.run(train_features), train_targets['cnt'].values)
val_loss = MSE(network.run(val_features), val_targets['cnt'].values)
sys.stdout.write("\rProgress: " + str(100 * e/float(epochs))[:4] \
+ "% ... Training loss: " + str(train_loss)[:5] \
+ " ... Validation loss: " + str(val_loss)[:5])
losses['train'].append(train_loss)
losses['validation'].append(val_loss)
return network, losses
In [19]:
network, losses = neural_network_training()
plt.plot(losses['train'], label='Training loss')
plt.plot(losses['validation'], label='Validation loss')
plt.legend()
plt.ylim(ymax=0.5)
Out[19]:
In [20]:
fig, ax = plt.subplots(figsize=(8,4))
mean, std = scaled_features['cnt']
predictions = network.run(test_features)*std + mean
ax.plot(predictions[0], label='Prediction')
ax.plot((test_targets['cnt']*std + mean).values, label='Data')
ax.set_xlim(right=len(predictions))
ax.legend()
dates = pd.to_datetime(rides.ix[test_data.index]['dteday'])
dates = dates.apply(lambda d: d.strftime('%b %d'))
ax.set_xticks(np.arange(len(dates))[12::24])
_ = ax.set_xticklabels(dates[12::24], rotation=90)
Answer these questions about your results. How well does the model predict the data? Where does it fail? Why does it fail where it does?
Note: You can edit the text in this cell by double clicking on it. When you want to render the text, press control + enter
How well does the model predict the data?
The model predicts the data quite well with 2 hidden nodes with a MSE Validation Loss ~0.395 and Test loss of ~0.24 for 2 hidden nodes. I infer this to mean that model is generalizable to completely unseen data in this case.
In [22]:
print("Test Loss:", MSE(network.run(test_features)[0], test_targets['cnt'].values))
Contrary to expectations, increasing the number of hidden nodes has no drastic impact on the test loss and validation loss numbers both.
In [23]:
losses_nodes = {}
for i in xrange(2, 7):
hidden_nodes = i
print("For %1.0f hidden_nodes" % i)
network, training_validation_losses = neural_network_training(hidden_nodes=i)
test_loss = MSE(network.run(test_features)[0], test_targets['cnt'].values)
print("\nTest Loss: %f\n" % test_loss)
losses_nodes[i] = [test_loss, training_validation_losses]
In [32]:
test_losses = [element[0] for element in losses_nodes.values()]
validation_losses = [min(element[1]['validation']) for element in losses_nodes.values()]
train_losses = [min(element[1]['train']) for element in losses_nodes.values()]
In [34]:
fig, ax = plt.subplots(figsize=(8,4))
ax.plot(test_losses, label='Test')
ax.plot(validation_losses, label='Validation')
ax.plot(train_losses, label = 'Train')
ax.set_xlim(right=len(test_losses))
ax.legend()
ax.set_xticks(np.arange(len(losses_nodes.keys())))
_ = ax.set_xticklabels(losses_nodes.keys(), rotation=90)
How well does the model predict the data? The model predicts the data quite well with 2 hidden nodes with a MSE Validation Loss ~0.395 and Test loss of ~0.24 for 2 hidden nodes. I infer this to mean that model is generalizable to completely unseen data in this case.
Where does it fail?
In [35]:
def squared_error(y, Y):
return (y - Y)**2
SE_Test = squared_error(network.run(test_features)[0], test_targets['cnt'].values)
In [36]:
fig, ax = plt.subplots(figsize=(8,4))
mean, std = scaled_features['cnt']
ax.plot(SE_Test, label='Squared Errors (on Test Data)')
# ax.plot((test_targets['cnt']*std + mean).values, label='Data')
ax.set_xlim(right=len(SE_Test))
ax.legend()
ax.set_xticks(np.arange(len(dates))[12::24])
_ = ax.set_xticklabels(dates[12::24], rotation=90)
Where does the model fail? The above graph clearly illustrates that the mean squared error is highest around holidays. These includes days such as Christmas and New Year eve (Dec 31). It is on such holidays that the model fails.
Why does it fail where it does?
In [44]:
fig, ax = plt.subplots(figsize=(8,4))
ax.plot(SE_Test*std, label='Squared Errors (on Test Data)')
ax.plot((test_targets['cnt']*std + mean).values, label='Data')
# ax.plot(predictions[0], label='Predictions')
# ax.plot((test_targets['cnt']*std + mean).values, label='Data')
ax.set_xlim(right=len(SE_Test))
ax.legend()
ax.set_xticks(np.arange(len(dates))[12::24])
_ = ax.set_xticklabels(dates[12::24], rotation=90)
In [40]:
print(np.corrcoef(test_targets['cnt'].values*std+mean,SE_Test))
For checking if there is a relation between model failing and actual consumption, let us look at the correlation between mean squared error and original values. Visually, we see that this is unlikely to be true. It also has a small and safe to ignore Pearson correlation coefficient.
I don't completely understand why the model fails where it fails, but I suspect having a way to factor in seasonality from previous years would improve this.
In [45]:
import unittest
inputs = [0.5, -0.2, 0.1]
targets = [0.4]
test_w_i_h = np.array([[0.1, 0.4, -0.3],
[-0.2, 0.5, 0.2]])
test_w_h_o = np.array([[0.3, -0.1]])
class TestMethods(unittest.TestCase):
##########
# Unit tests for data loading
##########
def runTest(self):
pass
def test_data_path(self):
# Test that file path to dataset has been unaltered
self.assertTrue(data_path.lower() == 'bike-sharing-dataset/hour.csv')
def test_data_loaded(self):
# Test that data frame loaded
self.assertTrue(isinstance(rides, pd.DataFrame))
##########
# Unit tests for network functionality
##########
def test_activation(self):
network = NeuralNetwork(3, 2, 1, 0.5)
# Test that the activation function is a sigmoid
self.assertTrue(np.all(network.activation_function(0.5) == 1/(1+np.exp(-0.5))))
def test_train(self):
# Test that weights are updated correctly on training
network = NeuralNetwork(3, 2, 1, 0.5)
network.weights_input_to_hidden = test_w_i_h.copy()
network.weights_hidden_to_output = test_w_h_o.copy()
network.train(inputs, targets)
self.assertTrue(np.allclose(network.weights_hidden_to_output,
np.array([[ 0.37275328, -0.03172939]])))
self.assertTrue(np.allclose(network.weights_input_to_hidden,
np.array([[ 0.10562014, 0.39775194, -0.29887597],
[-0.20185996, 0.50074398, 0.19962801]])))
def test_run(self):
# Test correctness of run method
network = NeuralNetwork(3, 2, 1, 0.5)
network.weights_input_to_hidden = test_w_i_h.copy()
network.weights_hidden_to_output = test_w_h_o.copy()
self.assertTrue(np.allclose(network.run(inputs), 0.09998924))
suite = unittest.TestLoader().loadTestsFromModule(TestMethods())
unittest.TextTestRunner().run(suite)
Out[45]: