PmodTMP2 Sensor example

In this example, the Pmod temperature sensor is initialized and set to log a reading every 1 second.

This example requires the PmodTMP2 sensor, and assumes it is attached to PMODB.

1. Simple TMP2 read() to see current room temperature



In [1]:

    
from pynq import Overlay
Overlay("base.bit").download()



In [2]:

    
from pynq.iop import Pmod_TMP2
from pynq.iop import PMODB

mytmp = Pmod_TMP2(PMODB)
temperature = mytmp.read()

print(str(temperature) + " C")

2. Starting logging temperature once every second



In [3]:

    
mytmp.start_log()

3. Try to modify temperature reading by touching the sensor

The default interval between samples is 1 second. So wait for at least 10 seconds to get enough samples.

During this period, try to press finger on the sensor to increase its temperature reading.

Stop the logging whenever done trying to change sensor's value.



In [4]:

    
mytmp.stop_log()
log = mytmp.get_log()

5. Plot values over time



In [5]:

    
%matplotlib inline
import matplotlib.pyplot as plt

plt.plot(range(len(log)), log, 'ro')
plt.title('TMP2 Sensor log')
plt.axis([0, len(log), min(log), max(log)])
plt.show()