In [1]:
# A bit of setup
import numpy as np
import matplotlib.pyplot as plt
%matplotlib inline
plt.rcParams['figure.figsize'] = (10.0, 8.0) # set default size of plots
plt.rcParams['image.interpolation'] = 'nearest'
plt.rcParams['image.cmap'] = 'gray'
# for auto-reloading external modules
# see http://stackoverflow.com/questions/1907993/autoreload-of-modules-in-ipython
%load_ext autoreload
%autoreload 2
def rel_error(x, y):
""" returns relative error """
return np.max(np.abs(x - y) / (np.maximum(1e-8, np.abs(x) + np.abs(y))))
The neural network parameters will be stored in a dictionary (model below), where the keys are the parameter names and the values are numpy arrays. Below, we initialize toy data and a toy model that we will use to verify your implementations.
In [2]:
# Create some toy data to check your implementations
input_size = 4
hidden_size = 10
num_classes = 3
num_inputs = 5
def init_toy_model():
model = {}
model['W1'] = np.linspace(-0.2, 0.6, num=input_size*hidden_size).reshape(input_size, hidden_size)
model['b1'] = np.linspace(-0.3, 0.7, num=hidden_size)
model['W2'] = np.linspace(-0.4, 0.1, num=hidden_size*num_classes).reshape(hidden_size, num_classes)
model['b2'] = np.linspace(-0.5, 0.9, num=num_classes)
return model
def init_toy_data():
X = np.linspace(-0.2, 0.5, num=num_inputs*input_size).reshape(num_inputs, input_size)
y = np.array([0, 1, 2, 2, 1])
return X, y
model = init_toy_model()
X, y = init_toy_data()
Open the file cs231n/classifiers/neural_net.py and look at the function two_layer_net. This function is very similar to the loss functions you have written for the SVM and Softmax exercises: It takes the data and weights and computes the class scores, the loss, and the gradients on the parameters.
Implement the first part of the forward pass which uses the weights and biases to compute the scores for all inputs.
In [5]:
from cs231n.classifiers.neural_net import two_layer_net
scores = two_layer_net(X, model)
print scores
correct_scores = [[-0.5328368, 0.20031504, 0.93346689],
[-0.59412164, 0.15498488, 0.9040914 ],
[-0.67658362, 0.08978957, 0.85616275],
[-0.77092643, 0.01339997, 0.79772637],
[-0.89110401, -0.08754544, 0.71601312]]
# the difference should be very small. We get 3e-8
print 'Difference between your scores and correct scores:'
print np.sum(np.abs(scores - correct_scores))
In [9]:
reg = 0.1
loss, _ = two_layer_net(X, model, y, reg)
correct_loss = 1.38191946092
# should be very small, we get 5e-12
print 'Difference between your loss and correct loss:'
print np.sum(np.abs(loss - correct_loss))
In [20]:
from cs231n.gradient_check import eval_numerical_gradient
# Use numeric gradient checking to check your implementation of the backward pass.
# If your implementation is correct, the difference between the numeric and
# analytic gradients should be less than 1e-8 for each of W1, W2, b1, and b2.
loss, grads = two_layer_net(X, model, y, reg)
# these should all be less than 1e-8 or so
for param_name in grads:
param_grad_num = eval_numerical_gradient(lambda W: two_layer_net(X, model, y, reg)[0], model[param_name], verbose=False)
print '%s max relative error: %e' % (param_name, rel_error(param_grad_num, grads[param_name]))
To train the network we will use SGD with Momentum. Last assignment you implemented vanilla SGD. You will now implement the momentum update and the RMSProp update. Open the file classifier_trainer.py and familiarze yourself with the ClassifierTrainer class. It performs optimization given an arbitrary cost function data, and model. By default it uses vanilla SGD, which we have already implemented for you. First, run the optimization below using Vanilla SGD:
In [31]:
from cs231n.classifier_trainer import ClassifierTrainer
model = init_toy_model()
trainer = ClassifierTrainer()
# call the trainer to optimize the loss
# Notice that we're using sample_batches=False, so we're performing Gradient Descent (no sampled batches of data)
best_model, loss_history, _, _ = trainer.train(X, y, X, y,
model, two_layer_net,
reg=0.001,
learning_rate=1e-1, momentum=0.0, learning_rate_decay=1,
update='sgd', sample_batches=False,
num_epochs=100,
verbose=False)
print 'Final loss with vanilla SGD: %f' % (loss_history[-1], )
Now fill in the momentum update in the first missing code block inside the train function, and run the same optimization as above but with the momentum update. You should see a much better result in the final obtained loss:
In [35]:
model = init_toy_model()
trainer = ClassifierTrainer()
# call the trainer to optimize the loss
# Notice that we're using sample_batches=False, so we're performing Gradient Descent (no sampled batches of data)
best_model, loss_history, _, _ = trainer.train(X, y, X, y,
model, two_layer_net,
reg=0.001,
learning_rate=1e-1, momentum=0.9, learning_rate_decay=1,
update='momentum', sample_batches=False,
num_epochs=100,
verbose=False)
correct_loss = 0.494394
print 'Final loss with momentum SGD: %f. We get: %f' % (loss_history[-1], correct_loss)
Now also implement the RMSProp update rule inside the train function and rerun the optimization:
In [50]:
model = init_toy_model()
trainer = ClassifierTrainer()
# call the trainer to optimize the loss
# Notice that we're using sample_batches=False, so we're performing Gradient Descent (no sampled batches of data)
best_model, loss_history, _, _ = trainer.train(X, y, X, y,
model, two_layer_net,
reg=0.001,
learning_rate=1e-1, momentum=0.9, learning_rate_decay=1,
update='rmsprop', sample_batches=False,
num_epochs=100,
verbose=False)
correct_loss = 0.439368
print 'Final loss with RMSProp: %f. We get: %f' % (loss_history[-1], correct_loss)
In [53]:
from cs231n.data_utils import load_CIFAR10
def get_CIFAR10_data(num_training=49000, num_validation=1000, num_test=1000):
"""
Load the CIFAR-10 dataset from disk and perform preprocessing to prepare
it for the two-layer neural net classifier. These are the same steps as
we used for the SVM, but condensed to a single function.
"""
# Load the raw CIFAR-10 data
cifar10_dir = 'cs231n/datasets/cifar-10-batches-py'
X_train, y_train, X_test, y_test = load_CIFAR10(cifar10_dir)
# Subsample the data
mask = range(num_training, num_training + num_validation)
X_val = X_train[mask]
y_val = y_train[mask]
mask = range(num_training)
X_train = X_train[mask]
y_train = y_train[mask]
mask = range(num_test)
X_test = X_test[mask]
y_test = y_test[mask]
# Normalize the data: subtract the mean image
mean_image = np.mean(X_train, axis=0)
X_train -= mean_image
X_val -= mean_image
X_test -= mean_image
# Reshape data to rows
X_train = X_train.reshape(num_training, -1)
X_val = X_val.reshape(num_validation, -1)
X_test = X_test.reshape(num_test, -1)
return X_train, y_train, X_val, y_val, X_test, y_test
# Invoke the above function to get our data.
X_train, y_train, X_val, y_val, X_test, y_test = get_CIFAR10_data()
print 'Train data shape: ', X_train.shape
print 'Train labels shape: ', y_train.shape
print 'Validation data shape: ', X_val.shape
print 'Validation labels shape: ', y_val.shape
print 'Test data shape: ', X_test.shape
print 'Test labels shape: ', y_test.shape
In [54]:
from cs231n.classifiers.neural_net import init_two_layer_model
model = init_two_layer_model(32*32*3, 50, 10) # input size, hidden size, number of classes
trainer = ClassifierTrainer()
best_model, loss_history, train_acc, val_acc = trainer.train(X_train, y_train, X_val, y_val,
model, two_layer_net,
num_epochs=5, reg=1.0,
momentum=0.9, learning_rate_decay = 0.95,
learning_rate=1e-5, verbose=True)
With the default parameters we provided above, you should get a validation accuracy of about 0.37 on the validation set. This isn't very good.
One strategy for getting insight into what's wrong is to plot the loss function and the accuracies on the training and validation sets during optimization.
Another strategy is to visualize the weights that were learned in the first layer of the network. In most neural networks trained on visual data, the first layer weights typically show some visible structure when visualized.
In [55]:
# Plot the loss function and train / validation accuracies
plt.subplot(2, 1, 1)
plt.plot(loss_history)
plt.title('Loss history')
plt.xlabel('Iteration')
plt.ylabel('Loss')
plt.subplot(2, 1, 2)
plt.plot(train_acc)
plt.plot(val_acc)
plt.legend(['Training accuracy', 'Validation accuracy'], loc='lower right')
plt.xlabel('Epoch')
plt.ylabel('Clasification accuracy')
Out[55]:
In [56]:
from cs231n.vis_utils import visualize_grid
# Visualize the weights of the network
def show_net_weights(model):
plt.imshow(visualize_grid(model['W1'].T.reshape(-1, 32, 32, 3), padding=3).astype('uint8'))
plt.gca().axis('off')
plt.show()
show_net_weights(model)
What's wrong?. Looking at the visualizations above, we see that the loss is decreasing more or less linearly, which seems to suggest that the learning rate may be too low. Moreover, there is no gap between the training and validation accuracy, suggesting that the model we used has low capacity, and that we should increase its size. On the other hand, with a very large model we would expect to see more overfitting, which would manifest itself as a very large gap between the training and validation accuracy.
Tuning. Tuning the hyperparameters and developing intuition for how they affect the final performance is a large part of using Neural Networks, so we want you to get a lot of practice. Below, you should experiment with different values of the various hyperparameters, including hidden layer size, learning rate, numer of training epochs, and regularization strength. You might also consider tuning the momentum and learning rate decay parameters, but you should be able to get good performance using the default values.
Approximate results. You should be aim to achieve a classification accuracy of greater than 50% on the validation set. Our best network gets over 56% on the validation set.
Experiment: You goal in this exercise is to get as good of a result on CIFAR-10 as you can, with a fully-connected Neural Network. For every 1% above 56% on the Test set we will award you with one extra bonus point. Feel free implement your own techniques (e.g. PCA to reduce dimensionality, or adding dropout, or adding features to the solver, etc.).
In [66]:
best_model = None # store the best model into this
#################################################################################
# TODO: Tune hyperparameters using the validation set. Store your best trained #
# model in best_model. #
# #
# To help debug your network, it may help to use visualizations similar to the #
# ones we used above; these visualizations will have significant qualitative #
# differences from the ones we saw above for the poorly tuned network. #
# #
# Tweaking hyperparameters by hand can be fun, but you might find it useful to #
# write code to sweep through possible combinations of hyperparameters #
# automatically like we did on the previous assignment. #
#################################################################################
model = init_two_layer_model(32*32*3, 50, 10) # input size, hidden size, number of classes
trainer = ClassifierTrainer()
best_model, loss_history, train_acc, val_acc = trainer.train(X_train, y_train, X_val, y_val,
model, two_layer_net,
num_epochs=20, reg=1.0,
momentum=0.90, learning_rate_decay = 0.95, update='rmsprop',
learning_rate=1e-4, verbose=True)
#################################################################################
# END OF YOUR CODE #
#################################################################################
In [67]:
# visualize the weights
show_net_weights(best_model)
In [68]:
scores_test = two_layer_net(X_test, best_model)
print 'Test accuracy: ', np.mean(np.argmax(scores_test, axis=1) == y_test)
In [ ]:
In [ ]: